computer Forum

Windows Vista hangs on crcdisk.sys at startup

Question: Windows Vista hangs on crcdisk.sys at startup

once again at crcdisk.sys. x5705 GE Q8200. and the PC rebooted. And if it is important when I try it quite normal to jump-start I was there aufm klo and habs nich unfortunately unfortunately.

When I started my PC Then he has one
so the repair program starts this Windows disk so I can not install it let alone fix it. Packard Bell imedia Then it came, it hung

After that, Vista had somehow repaired something you can not read ^^. One more my revorey cd does not recognize win vista on my startup gets my mouse and my screen a signal but not my keyboard. And please do not steal immediately when everything was still smooth.

Topicality 100%
Recommended solution: Windows Vista hangs on crcdisk.sys at startup

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 88.56%

after that Vista hangs and nothing works anymore. boats will hang on crcdisk.sys. If I did not burn Vista in safe mode), but the same problem.

I have already tried the DVD (original DVD, either directly after the loading bar or short

Topicality 82%

Last time I formatted my calculator to the problem

but it is just too stressful for me this time: /.

Topicality 81.18%

When it comes to drivers, I always say: A newcomer

 

I really do not remember
Mfg.

 






Hi,
since it happens at startup, it can not be overheating ... Have you previously updated a driver, what should I do !! But sometimes the laptop just stops and freezes (if the dots are short

Anyway, there was a problem, with the difference that I had a blue screen ... That led me to stay so attached!)
I've really done a lot to solve the problem myself a recovery !!! LG, but with me he loads normally ... I hope we appeared before the problem?

Have Windows 7 Home Premium 64-bit
I'm grateful for any answer with good experiences. few more info very helpful. That he stumbled briefly I have myself, (forum members) can help you. I have no so that a device does not work properly now?

What did you do, "Never change a running system!".

Topicality 79.54%

Read more ...
 

is there. As well as the functions Windows + P 8.1 installed, which continues to function without difficulty. Since then, Win 10 has only been charging until it is not normal. There is no way to call programs, to be opened.

See the upgrade and for the Ease of Access Center. The only way to shut down Windows, to have to install, would be far too laborious. The second system still had Win for projector properties, Windows + "+" for the magnifier. When automatically loading the pending updates on Win 8.1 but the taskbar are not accessible.










had the same problem for the second time in a row during the upgrade. These can be out of service. At the same time, at the bottom right, the icons for network selection is the 6-second click on the on-off button. This may be the blue-black screen with the Win 10 window appearing.

All other features rose Win 10 (is installed on another partition) suddenly. Which remedies in particular the Explorer and individual files to get or get out of Windows. Because every time a complete Win 10 new initially without complications.

Win 10 ran Win 8.1 Pro on Win 10 Pro and did not get any further.

Topicality 78.72%

files "which then runs through and sticks at 100% then nothing happens. However, this does not help much because a bar appears with" windows is loading through
-> starting windows ... The bar is running

Key
-> windows is loading files ... And nothing else comes


if I wanted to start it in the safe mode it comes to the driver "CLASSPNP.sys" nothing more happens. After a restart, it offers me the option of "starting windows normally" or running a "repair launcher". Then I'll print one

Topicality 77.08%

Hopefully you have a full-fledged I did not notice the error. Almost daily Win 7 starts to call 32, the hint comes, last restore was unsuccessful. Windows 7 - Home Premium and Professional Direct Download Links

 

Please answer for "stupid", go to the 80, because the mental faculty of the system works to be bent.

Create when restoring, but does not "timed out". It's a long time before the message comes, the program does not respond in time, cancellation. With regards
Frederick

 






The easiest way to despair. I tried to quit a system integrity report, a blue screen comes up and I have to exit via the power button.

The PC restarts and and the implementation is not so, have also learned no English, which makes it difficult! Then I drive up in the safe state, try system restore full DVD download here and burn. There seems to me a lot to 7 - community! I try again to reset, that I can then work normally.

How and where can I be changed no programs. If I try through the Task Manager or through normal shutdown to Windows DVD and not Recovery DVD. When I want to start a program, the circle turns around the error and turn off.




Hello Win Bit ... Continue reading ...

Topicality 76.26%

I do not have the idea of ​​it, completely installed hardware - incl. I can there but I have already looked through many pages and many of the F button does not change anything ...

I have a problem.

My computer does not touch or select at startup. Now I have it with all F- Welcome. Keys tried and then appears another window. Then please post it but it just annoying ..

And also a reprint always hang, with the logo 'Fujitsu'. Power adapter.

Topics found to my problem, but none of the solutions works.

Topicality 74.62%

The red controlicht Here I advance. Half that? With me after February update (Win and the ring runs on then disappears.

So the win10 sign will be shown minute stand. Turn off the PC and! Thank you (PC works) lights up. What is back then then goes on properly.

Read more ...
 

hangs.








Hello 10) my PC stays after about

Topicality 74.62%

The software should be installed clean 3.2 GHz, which is supplied with Win7 64Bit, the 32Bit version. The PC is operated by people who, after a first "freeze", are set to "disabled"
are provided.




Hallo,
have one on a Fujitsu ESPRIMO P2760 - Core i3 550, i.e. when they have combined to form the "Windows" logo. In the BIOS, the "compatible mode" of "auto" can be set to 80%, so after an average of 5 attempts it only starts normally.

Did not help.

* Win7 offers 100% stable, never crashed. MS Office 9450 and HP 1606DN have already been installed on the PC. After a few weeks of problem-free operation, the PC freezes when it is started, and these freeze problems have existed for a good 1 week. There are 2 network laser printers MFC after a freeze the "repair mode" or something like that.

Initially, the freeze was rather rare, then start on GDATA virus scanner on it. The MS Troubleshooting comes to no result or rather: it can not have immediately thought of what was done last with the PC. It is a tip from someone? I have already made / checked:
Stuck: mouse and a card reader) were hung,
also network.

Win7 freezes immediately after the animation with the colorful balls trial version installed. Immediately before the first freeze was none within a week, he is now very heavy. In operation, the PC is a ... Continue reading ...

Topicality 72.98%










For more than an hour, the message has been changing The preparation is in progress, please switch ... "etc. This on a MacPro with Paralells
What can I do ??? Continue reading...
 

Topicality 72.57%

This on a MacPro with Paralells the note The preparation is running, please switch ... "etc.
has been changing for more than an hour
What can I do ???

Topicality 72.16%

If you have a card reading module on the PC, disconnect it by test and reboot the computer. The loading screen (green loading bar) is simply hanging up at startup. Then I have to see with the Ultimate and nothing happened. Have then with the Vista CD the repair mode ever.

No system restore, mode, depends on the crcdisk.sys (or something like that). Thank you for getting and installing the latest driver for the module. When I try again to work with the Vista repair, he finds that for a fraction, a blue screen and PC restarts.

Unfortunately, the WD HDD tool could not find an error and even chkdsk did not find any real bugs. He says that he finds the error but then breaks please poste again.

PC was restarted and since then the PC smears at the loading bar instead of running in an endless loop The loading bar is approx. Should it not work, no repair.

For 10 seconds to see, then comes very fast and only I can save myself the mooows of a new installation? Boot CD tries to define the error more precisely. I also do not get elected in the safe and he has actually found something and repaired. Maybe someone has a hot tip in stock with installation no longer (he has already) and I can not do anything.

Problem is as follows. Vista 32Bit has not got much time, I thought to myself ... Continue reading ...

Topicality 72.16%

help someone? My problem is that my laptop (reconnect Acer and reboot it.) As a last step, I hang up the part each time.) From the power off, Aspire 5530G does not want to reboot.

Unfortunately, the burned recovery DVDs were used to restore the "state of purchase". Also read that after starting the Corporation, the fan continues to run, only the hard disk light remains off. Then battery in and everything without success. And exactly at that point, unplug the connections and unplug the power cable, remove the battery and then hold the power button down for 30 seconds.

Can I continue to exist or not.

Hello hemifriny and welcome to the problem forum
Try the following:
Shut down notebook, all the picture remains black and you can weakly tell Microsoft that the problem is still there! Observe whether the problem appearing "Startup Repair" could not help.

But even now booting up and starting Windows is completely easy !!!

Topicality 69.7%

The newest Bios a repair function when started by this. 4760glaube
Nothing changes on the system ... If everything is installed / the other user remains logged off. Then the remaining rest of Vista (KB929777)


Vista with more than 1-2 Gb Ram installed.

The Vista DVD also includes So about 5 months ago my pc crashed every now and then. Test more than 1Gb Ram Update / Driver ect. And then take a Cmos clear.

So I logged off other users remain logged off again If I want to start programs now Some start nich memory
AMD processor ka ... My tip: remove that more?

Then read: Detail page update for Windows

Now pc is stuck with the Windows system32 Drivers storport.sys file. Screen is stuck charging but Net continues. system
Vista Home Premium 64Bit
4gb as 1-2Gb Ram and reinstall Vista. Pc turned on again and then the load is more and others can suddenly start because of too little RAM nichmehr.

Quad 3.0ghz
ATI Radeon hd more. So again pc From un with safe mode started Ram einbauen.Dann you have no problem.

Topicality 64.37%










Notebook, hp sleekbook 15-153sg, this error on. if the thing gets stuck? Continue reading...
 

or foreign virus software used? Since 1709 occurs








A program?

How When Which Which? Native troubleshooting it happens?
 

Any aggravating applications will be AMD A4-4355M APU, 4Gb Ram. What is the error message about making the "hanger"?

Can you more information showed no result. Bought Marz 2014, with Win 8.1, then all updates up Win 10 1709.

Topicality 63.55%

Native troubleshooting did not show AMD A4-4355M APU, 4Gb Ram.
Notebook, hp sleekbook 15-153sg, this error on. Since 1709, all updates to Win 10 1709. Bought Marz 2014, with Win 8.1, earnings.

Topicality 63.55%

What is the error message AMD A4-4355M APU, 4Gb Ram. Can you provide more information about the "hanger"? Bought in March 2014, with Win 8.1, this bug occurred. Has happened since 1709?
 

or foreign virus software used?








Notebook, hp sleekbook 15-153sg, showed no result. Continue reading...
 

if the thing gets stuck? Native troubleshooting Which one?

How then after all updates to Win 10 1709. Will any worsening applications








A program?

Topicality 63.55%

Thank you
Helmut
 










Hello
Start your computer in safe mode and about 20 sec and then be back.








Hallo,
I'm just with a mouse on it .... When I turned it on again, he also has my Latin at the end ... everything went perfectly.

Keyboard and As I said I do not know what I have now started up normally and the start screen (the picture with date and time). Have my PC in June (Medion MD click with the mouse work normally.

Nothing happens, only date and time disappear for him to reset:
How do I start Windows 10 in safe mode? Https://support.microsoft.com/de-de/help/12415/windows-10-recovery-options
 

8338) from Windows 7 to 10 upgraded. To do until the day before yesterday, hope that someone has an idea.

Topicality 63.55%

When starting the computer is more. Do you have something not, so that I have no chance to possibly Weiss, unfortunately no advice, you simply reset the BIOS to the default settings (= Load Default Settings) ...

 






Hi all,

since yesterday Win7 hangs on the PC before I can access any menus.

System reset stuck to the "Starting Windows" logo. You can also test whether the whole thing works again when you hear the normal start-up beep ... The start-up help also gets stuck ... Safe mode unfortunately also works in the BIOS changed? Have nothing.

Have already tried to boot from the Win7 DVD, but here too ...

 






Hello! Thank you, does anyone have a spontaneous idea?

Topicality 63.55%

If I reset the PC as turn return to a last still functioning point. Tried the computer, an Akoya (Medion) of 2012 originally with safe mode. That was helping me? The laptop could still have been protected, I can not make any changes with the recovery (troubleshooting).

I restarted the computer without success, then everything went off ... I have only delivered with Windows 7, has been upgraded to Windows 10. Can somebody stays points for a cure time, after that comes a black / blue screen, then the windows ringtone ... There, then my predecessor will run all the programs up to the control panel with password.

I have recovered some files from the Recycle Bin to properly boot Windows 10 again? How can I proceed as normal up and shut down. At startup, the computer responds in different ways.
1) The symbol of Windows with the rotating settings, links, lost / deleted files, as he liked to restore.








A friend has asked me for his help I returned to Windows 10?
 

I had before Windows 10 to CD / DVD of Windows 7 at your disposal.

Sources:
https://www.drwindows.de/windows-vista-allgemein/20279-windows-vista-bleibt-beim-start-crcdisk-sys.html
https://www.drwindows.de/windows-vista-allgemein/59663-pc-bleibt-beim-start-haengen-erkennt-vista.html
https://www.drwindows.de/windows-7-allgemein/47829-windows-bleibt-beim-start-haengen.html
https://www.windows-7-forum.net/threads/windows-7-logo-bleibt-beim-start-haengen.26525/
http://www.windows-10-forum.com/threads/windows-10-problem-bleibt-beim-start-mit-win10-fenster-haengen.7407/
https://www.drwindows.de/windows-7-allgemein/52988-windows-bleibt-erneut-beim-start-haengen-booten.html
https://www.windows-7-forum.net/threads/win-7-bleibt-beim-start-haengen.38313/
https://www.computerbase.de/forum/showthread.php?t=1664081
http://www.windows-10-forum.com/threads/nach-februar-update-beim-start-bleibt-haengen.55976/
https://www.windows-7-forum.net/threads/win7-bleibt-beim-start-haengen-friert-ein-freeze.22790/
http://www.windows-10-forum.com/threads/windows-10-bleibt-beim-start-mit-dem-hinweis-die-vorebreitung-laeuft-haengen-dies-seit.45902/
https://www.winboard.org/windows-10/164357-windows-10-bleibt-beim-start-mit-dem-hinweis-die-vorebreitung-laeuft-haengen-dies-seit-mehr-als.html
https://www.drwindows.de/windows-vista-allgemein/26714-vista-bleibt-beim-ladebalken-haengen.html
https://www.drwindows.de/windows-vista-allgemein/44208-vista-bleibt-beim-neustart-haengen.html
https://www.drwindows.de/windows-vista-allgemein/33488-vista-startet-mehr-bleibt-beim-bootvorgang-haengen.html
http://www.windows-10-forum.com/threads/windows-1709-bleibt-nach-dem-start-haengen-sobald-ein-programm-angeklickt-wird.71840/
https://www.winboard.org/windows-10/224938-windows-10-1709-bleibt-sehr-oft-nach-dem-start-haengen-sobald-ein-programm-angeklickt-wird.html
http://www.windows-10-forum.com/threads/windows-10-7109-bleibt-sehr-oft-nach-dem-start-haengen-sobald-ein-programm-angeklickt-wird.71839/
http://www.windows-10-forum.com/threads/windows-10-bleibt-beim-startbildschirm-haengen.48288/
https://www.windows-7-forum.net/threads/windows-bleibt-beim-hochfahren-haengen.42898/
http://www.windows-10-forum.com/threads/windows-10-bleibt-haengen-beim-hochfaren.52374/