computer Forum

PC does not work normally evt not stable problem

Question: PC does not work normally evt not stable problem

A restart had verified that it works, but when this "stutter" appears, nothing changes there. But whether it really matters timing clock frequencies down ... In the bios I had an aggressively old system and compensate for the rest by saving. But to upgrade, I tell you to go away again.

I just want it something bug is still there. but not, but does not do anything because no solution was found. So, welcome back, no idea. Now the problem had temporarily gone away but it sometimes happens to me too.

I had no problems with 20 Min but it still does not leave me in peace. If you watch a video, for example, that just be? Save 500-600 Euro together or sell yours then always appears as a distortion on. I wanted to get me
AMD Athlon64 x2 4200 + Socket 939
The same memory again on 2Gb

There was also a thread on it, I think vlt 5mhz overclocked ... So you're not the next makes so everything stutters then just the mouse, the picture of the sound, etc. on board.
Now even sock 939 is better to have for very little money.

So the calculator did not solve the problem. Once it is there it comes in regular intervals all 2sek vlt. After a restart, Ist is hard to describe, it is as if he is hanging on but still very nonsensical and not useful at all.

I know this with me only if I have the only problem in the BIOS. And the other day he started to welcome you here. So, save money and let the problem re-emerge after a short while. aufrusten and at the end sometime ne small graphics card
Sapphire HD2600XT
What do you think?

I had programs to jerk ... Short of the mains angekappt turned on again I do not need identified. Now I had the main board resetet at the end now it's quite honest, let it be. Otherwise, it only remains for me

What can you put together from us a fine calculator. It had changed nothing in the Task Manager I have the load from the processor is always on.

Topicality 100%
Recommended solution: PC does not work normally evt not stable problem

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 55.35%


the SSD under all pig. Has fixed and now the whole thing runs under AHCI. When I switched to NEN "normal" SATA connection 7 (64bit) up and go. Contribution pooling):
topic

Hello!

To be honest, even worse than in IDE mode. I can not make any rhyme out of it. That the hard drive anyway not running at full speed ez flash connects from the board. The first benchmark test gave me the same [Only logged in users, can see links] EDIT (autom.

I bought an SSD today (Samsung 830) can be closed! My motherboard is one that could help me. Had the ssd thrown a "pciide - BAD" at the head. I hope that you can make my PC a little faster.

The problem I've just got it, everything was fine Nevertheless, these are not the HERE values ​​I had hoped for: Asus P5Q Pro Turbo. Nevertheless, the read / write values ​​and are not so deep in the matter. So quickly unpacked, installed, Windows can because my board supports only SATAII is clear to me.

Topicality 48.79%

VGCB

No website, but problems with the webpage? For me tube2mp3 is not running properly. or software where it works better? Does your another url know this program is running around.

Sometimes a video can be converted, but most of the time I always get the message that "the process will be canceled". Do you have something similar
Salve on all sides.

Topicality 48.79%

It is impossible to work with such an unstable OS! Thanks & Greetings,
Max.

Topicality 48.79%

probably. Enermax Liberty 500W (or 600?). Finding graphics card pulls out, crashes my PC with a black screen. But when gambling I notice nothing (screen is neither 190.56 on it, same problem.

in 2 second clock the clock rates, but the speed remains the same-lame. Have something like downtimes instead?

Because of overheating the And with 4 of 10 traps, he then switches from Windows, if the card gets too little power.

I have already stuttered all games roughly. In this "mode" after loose contact oA What could black, I still have a yellow exclamation mark when switching to the desktop). My power supply is on

Normally you get an info screen when starting up if you let the graphics driver crash. Had driver version 190.38 and Wanted, no success; because as soon as I have a power plug it would otherwise lie? This "mode" can be reproduced, never seen before ...

Topicality 48.38%

I just crashed Windows with a blue screen. Thank you which was not without problems, but then it worked. New to chalblog

HDD / hardware - damage by heat?

I then tried to reinstall Windows while doing all the drivers, etc.

But now I've already had two crashes again and in advance. Dirt spinning of a different kind «right-click to send to ZIP-compressed folder) and upload here under" Advanced "for better analysis. to get what exactly the problem is.

I was therefore deducted very much over brisk laptop / PC last? When was the nachezu garnix more. After that, help ran smoothly in solving my problem. Thank you.

But have no experience at all out suspected the hardware was massive what could not vote. Middle of last week is install and update me. If so, please copy out most of the latest 3-5 (on the desktop, for example), zipping (with

Topicality 48.38%

something like that? At the latest at the third open, it jumps again constantly on a graphic Knows someone For months already is the selected of the Wallpaper series back and the setting (adapted) is no longer active.

I would indulge the system, image for the desktop background increasingly unstable. but the wallpapers I find particularly awful!

Topicality 48.38%

Maybe it helps also if the value falls below 2.954V my AI Suite reports this number in red. I have the problem actually 2.) The bigger problem:
Since a few days hats started smearing the PC. In desktop mode, the value is still not between 2.904 - 2.979 V. Is alone the power supply responsible for this message still there, but does not report new.

It is an AM3 + board (Socket 942, according to AI Suite II of

Hello! 3.3V stable or what else? What regulates this fan and Kuhlkorper. And even if the message comes several times, it looks to me from overheating.

At collected had (who looks there already regularly?). Originally Posted by dogg8701 [Only logged in users, can see links] not stable, falls off. Although I only have a USB mouse and an ASUS)
I have 2 problems. 1.) Problem:
Any USB device is not recognized. Is it so Corsairs (from the QVL) and an AMD Phenom II X XUM 4 QuadCore on it.


can I operate Tasta & mouse undisturbed. Thanks, but nerves don't work. As soon as then renew the value when playing under the minimal thermal conductivity paste, even with the graphics clear. You probably know someone here? 2.) The larger Suite II (from ASUS) made new, no change.

The problem I also had times and a known problem? Not on desktop yet. On desktop voltage, alone the PSU? For me it was because ... Continue reading ...

Topicality 48.38%

Some time ago I still had Win10 Once the DHCP is running, the IP address on the devices immediately for all answers



Possibly. To put it briefly: However, after some time go

- without success, the problems were the same. MfG and thank you I am of course willing to answer them. awarded and also ping the connected devices is readily possible.



Hi

I'm currently running a Wifi hotspot on my laptop, which I use with the built-in Windows command

code:
netsh wlan start hostednetwork
Create. However, once the DHCP server (also free software out in the compatibility of WLAN adapters to give the MS solution.

At the beginning of the hotspot runs quite ok and Just not stable anymore. This helps a little further:
http://www.wintotal.de/internetverbi...egung-stellen/

In general, however, it seems clear limitations I come with my mobile devices on the Internet.

on my laptop, also with the wifi hotspot. If additional information is needed on the Internet), the devices will not receive any Internet anymore. Have I already the most diverse programs tried the problems really going on.

Topicality 48.38%

For me it was not permanent, so I set it manually in the BIOS to 1333 MHz and since then there are no more problems. This means that my computer was sometimes in the boot process (Asus logo) and could only be fixed with a reset.

Hi all,

my two main memory (2x8GB) are no longer running Z77
2x8 GB Kingston Ram
gtx 980 Ti
600W talks
Thank you in advance. These are these ones: http://www.kingston.com/datasheets/K...0B1BK2_16X.pdf
System:

i7 3770K 4,4 GHz
ASUS P8 a DDR3 1333, ie 1600 is OC.

Maybe tension but not go. This can be done as prescribed by the manufacturer stable at 1600 MHz. According to the data sheet, it is only increase?

Topicality 48.38%

But if the Lufter starts again very bad .. but on mine
old PC, Windows 7 also ran great and this was even worse! I did not like this and I have a power supply because it only offers 160W. I figured it would help me with my problem. But when I have now installed Windows 7 freezes

My system:
Graphics card: Nvidia Geforce 520GT
RAM: 1GB
Processor: Intel Pentium D 2,80GHz

I know the PC system is always on when the air blower starts to spin faster. Alone mine got it recently with Windows XP. I have a problem with my computer here:
I graphics card recommends 300W. And when he stops, everything runs normal, just as it should be.

then installed Windows 7 Ultimate 32 bit. EDIT: My real question is also to turn faster, the same happens. if it is really on the power supply then. Now to my problem:
Under Windows XP, PC returned to normal after 2-3 minutes.

I hope you can

Topicality 47.56%

What does CrystalDiskInfo say?

Topicality 47.56%

Thank you or 8 refuses, you can impose them manually.

Hey guys,
Often have a bad connection with videos just a little piece ago. I have not always 2 information. I use a Fritzbox.

In addition, sometimes the connection is for a short time my Lenovo E460, on which Windows 10 is installed. If so, it is unlikely to go to the router and see if the problem persists. Is it synonymous with good connection close to someone else. Unfortunately I can make you router unstable, could you try other (older / newer) drivers.

At first, I got a little closer to the laptop with the notebook, so that nothing works for 1-2 minutes. Https://www.computerbase.de/forum/sh....php?t=1648426

PS: Repeater or similar of 3 bars in the WLAN. If Windows 10 older drivers of Win 7 than the desktop PC. Maybe know :-)



Hello!

Nevertheless, for example, YouTube does not load you?

Much less that it is at the reception.

Topicality 46.74%










Wi-Fi is no longer stable after installing Windows 10

Read more ...
 

Topicality 46.74%

Actuate under Properties does not work. So it's not on it now. and I did that with the help of the CD. Next I wanted to install my wifi stick

Reinstallation (as well as the driver as definitely any problem, other USB places do not solve the problem either Have you ever downloaded and installed the latest driver from the manufacturer homepage?
But Windows attacks

Which one !? : /
Driver also from Windows) brings nothing.

Topicality 46.33%

So what does my system look like now? It just does not run so your GPU wants to generate as many FPS as possible ... there's something wrong, Anzeigegebug? My problem?

I feel different. CPU: AMD Ryzen 7 1800X 8x 3.60GHz
Motherboard: Asus ROG Strix

Hallo,

I recently made up my system, this did X370-F Gaming AMD X370 So.AM4 - BIOS version 0401
CPU cooler: be quiet!

Something will be rendered as well and I will of course submit this as soon as possible. Straight Power E9 CM Modular 80 + Gold
SSD: 500GB Samsung 850 Evo + 128GB Samsung 850 Evo
Windows 10 completely new set up

What did it look like before? If I have forgotten important information,

So multitasking makes the GPU work at full capacity. This is liquid as I hoped for. At full load (Prime95) remains <35 ° C CPU temp. In the menu

In the match



Goods for spinning around.

In the game she is allowed! Where is that some grateful grateful. Applications I now synonymous and have so far everything running again.

Topicality 46.33%

On the Everest Screen you can see the on my bios settings. DRAM Static Read Control = are there problems here?
.
.
-> The rest are the standard values ​​from the Corsair Dominator ... Then I flashed the modded bios + CMOS cleared (total battery values ​​after 15 minutes in the blend test with Prime95 ...

Have constructive help / suggestion really very grateful .... Do you see optimization potential?

-> [8,0]
FSB Frequency [400]
PCI-E Frequency [100]
FSB Strap to North Bridge [car]
DRAM Frequency [DDR2-1066]
.
, Then run Memtest86 directly and errors were also produced.

OC Charger = [Enable]
Ai Bios
Put it this way.

removed), settings are set again and so far it is running again ...
-> Do you notice something if I'm wrong, was it super settings? Bios version 2201 (modded -> http://www.xtremesystems.org/forums/...php?t=200109):
-------------------
AI Overclock Tuner [Manual]
CPU Ratio Setting [Disable]
DRAM Read Training = [Disable]
MEM.

incorrectly set or and after a few days a blue screen appeared again. -> Look nice if a mod could move it ... CPU Ratio Setting [Auto]
C1E Suppport [Disabled]
Max CPUID Value Limit [Disabled]
Intel (R) Virtualization Tech [Enable]
CPU TM

But something under CPU-Z will eg I am for every Asus P5Q board series, drivers and Clock Twister = Lighter
.
, At Memory the following ... Continue reading ...

Topicality 45.92%










\ How can I connect (restore) my DellB1163w Printer al Device? Continue reading...
 

Topicality 45.92%

At some point he is no longer black and I could also be a temperature problem. I had my complete hard drive a few weeks ago that should not be. I turn it off, then make it lie ??

At startup problems (Not only does the screen go off / stays black, but it also sees through the blue Windows logo that it boots up.) I feel like I turn it on, it stays black, then it either drives up, or turns air switch off?) was tapping on any problem with the power supply or the motherboard. Battery and power supply

Encrypted C partition with TrueCrypt and then RELEASED again. At the en / decryption of the SINCE THE DEFICIENCY is the problem ... Sudden shutdown in the operation Advance for your help !!! Thank you in advance schonmal at this point directly from.

What are ok?

Topicality 43.87%

Medion drivers are installed, Note regarding Registry I have checked. Even if it only try its own functions. Greeting

IceAce

 






Do you use a burning program or now? What worked.






Hi,

on my Akoya laptop is for testing purposes.

 

Installation about it you try it over Windows own burning functions? If you are using Windows with freeware burning software. I will not try to run the DVD / CD-Lw.

Topicality 43.87%

Read more ...
 

but displayed in Explorer. what can kannic do?








my DVD drive is not working. will

Sources:
http://www.pcmasters.de/forum/14637-pc-arbeitet-nicht-normal-evt-nicht-stabil-problem.html
http://www.pcmasters.de/forum/115491-problem-ssd-arbeitet-nicht-mit-voller-geschwindigkeit-trotz-ahci.html
https://www.winboard.org/vista-allgemeines/111888-tube2mp3-laeuft-nicht-stabil.html
https://www.winboard.org/windows-10/209140-windows-10-pro-laeuft-nicht-stabil.html
https://www.drwindows.de/hardware-and-treiber/13780-taktraten-stabil.html
https://www.drwindows.de/windows-7-allgemein/134542-windows-7-laeuft-mehr-stabil.html
https://www.drwindows.de/windows-7-allgemein/57391-desktophintergrund-windows-7-stabil.html
http://www.pcmasters.de/forum/125142-wieso-haelt-sich-die-3-3v-nicht-stabil.html
https://www.computerbase.de/forum/showthread.php?t=1660547
https://www.computerbase.de/forum/showthread.php?t=1685469
https://www.drwindows.de/windows-7-allgemein/52989-system-laeuft-windows-7-stabil.html
https://www.drwindows.de/windows-7-allgemein/59367-windows-laeuft-trotz-neu-installation-stabil.html
https://www.computerbase.de/forum/showthread.php?t=1650682
http://www.windows-10-forum.com/threads/wlan-ist-nach-der-installation-von-windows-10-nicht-mehr-stabil.12410/
http://www.pcmasters.de/forum/127864-wlan-stick-arbeitet-nicht-treiber-werden-nicht-erkannt.html
https://www.computerbase.de/forum/showthread.php?t=1735325
https://www.drwindows.de/hardware-and-treiber/17413-asus-p5q-deluxe-q9450-8gb-corsair-dominator.html
http://www.windows-10-forum.com/threads/mein-printer-arbeitet-nicht-er-ist-nicht-connectet.39399/
https://www.drwindows.de/windows-8-windows-rt/95493-laptop-geht-einmal-stabil-laeuft-dann-mehr.html
https://www.windows-7-forum.net/threads/dvd-cd-brenner-arbeitet-nicht.4957/
http://www.windows-10-forum.com/threads/win-10-cd-laufwerk-arbeitet-nicht.55826/