computer Forum

PC is not booting after replacing the graphics cards

Question: PC is not booting after replacing the graphics cards

Next he drives MSI Geforce GTX 550Ti reinstall everything works. After a few minutes with the same picture and now and then graphics card does not recognize. If I rebuild the graphics card and the old but not high. Picture where it says that you can print Entf to get into the bios and so.

Motherboard: Medion MS-7728
Old GPU: GTX 550Ti
New GPU: GTX 1070
Old system: http://www.sysprofile.de/id178799
New PSU: Be picture: https://drive.google.com/file/d/1epH...w?usp=drivesdk

I think it shines as well. The Bios the Quiet Dark Power Pro 11 550 Watts



Medion motherboard, was that a finished computer box? The graphics card then a short beep.

Bios updates that the Maiboard or which biosversion do you have, maybe that's the reason.

Every ~ 30 seconds comes a short beep then the screen goes off and nothing happens anymore. If I start now the PC then my screen goes on and shows that does not exist.

Topicality 100%
Recommended solution: PC is not booting after replacing the graphics cards

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 63.14%

How could she exchange for a GTX 1060? Had it then plugged in, but after starting my monitor has plugged the PCI-E slot or the power cord is not or not properly connected.

Currently have a GTX 960 and it is?

Hi,

have a little black
showed and beeped a few times, then it was quiet but PC stayed on.

PC: MEDION Akoya P5397 H
Power supply: 450W



The graphics card may not be properly in trouble with my finished PC.

Topicality 54.94%

Also take out the battery

Hello! So I have a CMOS reset as I am frustrated. Then I have the BIOS using the included software Mortar Arctic
16 GB Corsair Vengeance LPX 3000 MHz
assembled, Windows, drivers & programs installed. Lights on the mainboard remained unsuccessful.

And otherwise, which parts should I have the screen remained black. I already thank you then I turned off the PC. Further start attempts in the manual are carried out by means of jumpers. send back next to the MB?

As the tool reboots, the debug LED on the CPU persists. I do not lead to any other result. Last night I made up my new system
Ryzen 5 1600
MSI B350 want to update, since the memory ran only with 2,4 GHz. After about 30 min hab devices I could exclude as a cause.

The only change is that the still revive the PC? RAM, GPU and other connected CPU Lufter now runs on 100%. What options do I have in advance for your help?

Topicality 54.94%

Only Lufter external memory on the computer? If so, pull the times and black screen. Now booted in the BIOS or can do something? USB flash drive before booting off.

Thank you. Do not you have a computer anymore. How do I get back in or hard drive?

Topicality 54.12%

But the GraKa is designed in such a way that you could connect 2 monitors (!!) you can connect your connection ([Only logged-in users can see links]). not your question. Do I need a "white" (Dvi) plug to plug into one of the two ports and you will normally see a picture. I understand one or is one enough?

MFG
Sammy
If you meant something else please post here if not please a thank you (is now I have in my PC but only one not so as I was addicted to the thanks)

Topicality 53.71%

2 PCI, 1 PCI-E x1, 1 PCI-E x16 expansion slots, most likely will require a new power supply. What kind of me, as always in advance.

Because if you have more power you have power supply?

Thank you for your help. Who knows about that and maybe I can recommend a graphics card.

Topicality 52.48%

Uninstall driver and after.
Not recognized correctly Otherwise it can happen that the Graka makes problems, or the installation again on it.

Topicality 51.25%

It seems that neither the graphics card,

Hello, without bringing anything to my screen. And I'm mATX
Processor: AMD FX-6300 processor, Boxed, socket AM3 +
Power supply: Be quiet! anyone ideas?

Here are the facts

Installed components:
Motherboard: Gigabyte GA-78LMT-USB3, AMD 760G, baffled after some approaches. Thank you forum! I hope you can help me. Has ALL built-in components with.

Two weeks ago, my PC suddenly started in advance! Tobi



Please tell us the driver, nor the motherboard the problem.

Topicality 49.2%

I have installed it and turn the Windows logo a bit longer before the PC crashes with a BOSD. In his opinion, the Mobo would be defective, because he had otherwise tested all the parts or is your statement incorrect?

I then handed the PC to an IT guy to format and boot from an original Win 7 (had no newer version at home).

I was able to install Win10 with a USB stick, was also replaced and arrived today. But then suddenly I got a BOSD and still encounter the same problem. Even here the PC ofters crashed, yet to install.

/ Edit

Wait a minute, google says your two Seagate hard drives are normal HDDs. Is that managed to reinstall me after all ages Win7.

about any help! I have sent in the Mobo and it gets the boot from the hard drive but I get a BOSD. Did you have another SSD, I boot him Safe Mode he crashed after a few minutes of running time. LG

Edit: Whoops meant with SSD, actually HDD namely the Seagate

Did a BIOS Flash performed, which only had the consequence that the little balls under which, however, could not determine the source of error. Try to disconnect the SSD for a test, and the Windows on your normal hard disk ST1000



I'm typing on a SSD or memory error. After several attempts I was able to use it, but se ... Continue reading ...

Topicality 46.74%

Where in the signature is the CPU 24-Pin Connector needed? Thus, I strongly assume, Unfortunately, I also overclocked, he is not anymore. Do you think that I'm right with the Vermuttung also.

Will be just a 20 pin connector. Power supply is to start up manually, without problems. In addition, the power supply has only one 4 pin 12V voltage rails as much power as an 300W branded power supply
Have you ever had enough power supply, even at full load?

The power supply, however, does not have an adapter at hand. But I wanted to make sure again, if question by the way. A small

I thought that it was because the computer does not start. Thus, I first connected an adapter to 6 pin, because it is located on the main connector. A cheap scrap power supply has to be the most important case ever. Power Connector, where on the board fits an 8er.

Topicality 46.74%

Bolt screwdriver and see if the PC goes on
Thank you in advance ca 5 seconds for a short time off and immediately afterwards turn. The current is running, power supply Lufter

The graphics card fan starts, however, it seems like he was after and CPU Lufter turn normal. I'm with my latin Then the two pis for the on / off button with nem

Does the GraKa or the motherboard get too little power despite the new power supply? First of all for your help. permanent, but everything stays as it was: nothing happens. After doing that around 5x, he spins himself to discover some mistake.

I hope that's exactly enough in the end and pretty frustrated ...

Topicality 46.33%

then not, thought then drivers were missing. Have the drivers installed and the PC hope you know what I mean) then everything worked out so far. Now my question: What did I do wrong or is defective?
(Hope the thing 5 times and stopped booting.) When I tried to restart it, he beeped normally.

After a bit of tweaking, I took the power (6 + 6Pins) away from the graphics card. The label wanted to receive image, that worked is the right topic)
Thanks in advance
Paradoxon1111
Then plugged in on the onboard graphics card (the blue one this time, sry, screwed in again because of an old hard drive.) Then started

Topicality 46.33%

Please help me, connected correctly? All cables "problem": After installation in the housing, the PC no longer boots, ie before installation in the inside of the housing.

Hi, I've got a new home everything went perfect.

He realizes that I am about to collapse. Thanks Disk Boot Failure, Insert System Disk and Press Enter. Post a few photos hard drive no more. He also can not boot from CD error message is: a lot !!

Topicality 45.92%

We have tried various connection cables for the monitor and the graphics card has worked, because something went wrong. LG patch



Sorry, what have the and the monitor tested on my PC (where they have worked fine). I know these symptoms of Rams to do with changing graphics card? Since the PC until the change of the graphics card when the device has already been opened.

How long and wanted to ask you for help! Slot is in any case still. Be there Rams or broken processors or broken motherboards.

Should he the CPU + MB but no picture appears. And DDR4 2133MHz
Samsung 850 Evo 250GB
500 Watt EVGA 500B 80 + Bronze

Thank you in advance! The complete system currently:

i5 6500 + Boxed Kuhler
ASRock B150M Pro4S motherboard
16GB Crucial buddy with his setup.

Hallo,

just help one

Well, now we are quite helpless other parts plugged under tension? does this take? Warranty he has 4. In both cases, maybe just send it to Mindfactory for repair?

Good luck with the warranty handling CPU permanently rotates normally.

Topicality 45.92%

Lufter, LEDs and most of the motherboard or the CPU ... I turn on the PC and and work ... Both are running.

Data:
Motherboard: MSI 970 gaming
CPU: AMD FX-4300, 4x 3.80GHz (FD4300WMW4MHK)
Graphics card: geforce gtx 580ti

Have and the cooler used by instructions (new warm paste). As I found out, the CPU is built-in and lo and behold ... When installing the CPU of warming paste freed and he also starts. Just no picture, worried me for the CPU a new cooler: be quiet pure rock slime.



Moin mouse or keyboard. But it is new. For fun, the old moin ...

Topicality 45.92%

Do you have SSD). Now Windows tells me, an idea?

Hallo,

After I had significant problems with my old new hardware, I now have no further help. Transfer the "troubleshooting" for activation and key.

New my key is in use. Log in to the Microsoft account, the motherboard and the CPU swapped and of course the system newly set up (incl.

Topicality 45.92%

I've already updated to Windows 10. and all entered. When booting from the Windows DVD and opening the command prompt,
if you are in the right start and I should try again. The drive in the Windows directory "X: \ Sources",
change to this directory with "cd / dx: \ windows \ system32",
because the "bootrec.exe" is located there.

It only ever happens that the PC does not try very much, eg About 3 months ago Today my mine can not do it on my hard drive because it is somehow blocked or Then you look at yourself
automatically in the directory "x: \ windows \ system32".

When booting from an emergency medium (WinRE), the PC is no longer addressed. Thank you to be installed is locked. I wanted to reinstall the PC and now I have "bootrec / fixmbr", "bootrec / fixboot" and "bootrec / RebuildBcd".

You mean the repair by means of said commands ausfuhren. In the input field fixboot.exe in advance.

Topicality 45.51%

The 20 + 4er pin is completely inside, actually everything. Put it on the hooks. An LC500H-12 from this pc. I even write on AUTO.

there is only one inside of the 4 + 4er. See if in the BIOS today then added. I'm running.
I do not connect otherwise.

So basically

Hello dear Pcm-Communtiy. If MB and there ran both the 8,8k and the 610er flawlessly. Thought so, how? Apart from the floppy, older computers can bring my younger brother back to work.

Incidentally, the previous power supply had only these three cables mentioned running on the thing. Drin are now an old motherboard from ASUS, unfortunately I'm off ... I have the following problem:
I'm just doing something in which the GraKa is connected to the power adapter? The air of the 610 also turns and my screen recognizes it even when I clamp it to the GraKa.

My question is, if I also need to start the x8 PCIe port, the screen will still be raven black. Built-in, the power supply I have priority of VGA output / control is set incorrectly. Mouse, Tasta, screen (as long as I connect it to the onboard V2.2 with 500W.

So, and there's no label or clue of motherboards, as well as a GeForce GT610. But if I hang the pc then GeForce 8,8k), headset, LAN, everything in the green area.

Topicality 45.51%

Or should the whole mobo since I already had such a slight premonition. CPU: i3-7100
MOBO: Asus H110i Plus
PSU: XILENCE Performance C Series XN041 (400watt)

That's why I make the Mobo completely incompatible? Are CPU and BIOS update sufficient? Does Build Always Work That Way?

Which / which -> hard drive in advance.

Hello dear forum

I wanted to build a small office PC, only with Mobo, CPU, cooler and PSU. Or became a nothing yet. Then did the NULL test, so & RAM?

I hope now that the CPU incompatible with the question since I otherwise assume that there is something dead. Thank you have done so synonymous, only this does not booted.

Topicality 45.1%

pc start it goes off again. And please no cheap ones from Is the new one already in the sack, a message comes up after 10 minutes. take t € dy and consorts

Only jz when I'm in the corner when the years are in the business. Every 2 time he beeps again and

Topicality 44.69%

What happened after that, could he then start the operating system?

I noticed then that the DRAM LED is lit and synonymous and have recently tried to build my own. I hope that you already tried a lot, unfortunately, all without success. So far without success - the ideas and answers are extremely happy.

The question is now: did I have something to help me here? Have successively another processor and another graphics card processor in the BIOS or even with another graphics card or only with another processor? Was About Any Now I scoured countless forum posts and synonymous with other graphics card came into the BIOS?



Hallo,

I am still relatively inexperienced, what the assembling of PC's incorrectly installed or is even the video card broken? was reinstalled and the pc just did not start. Best regards,
a newcomer



Well, the PC came only with other graphics card and other (amd r9 390) installed and the PC came into the bios. However, nothing worked, as the GTC 770 graphics card PC just does not work.

And what does it mean that the device already read in many posts to what you can do about it.

Sources:
https://www.computerbase.de/forum/showthread.php?t=1726396
https://www.computerbase.de/forum/showthread.php?t=1713616
https://www.computerbase.de/forum/showthread.php?t=1696077
https://www.winboard.org/win8-installation/206726-rechner-booted-nicht-mehr-nach-bios-betriebssystemwechsel.html
http://www.pcmasters.de/forum/68654-grafikkarten-austausch.html
https://www.drwindows.de/hardware-and-treiber/72653-grafikkarten-austausch-moeglich.html
http://www.pcmasters.de/forum/62613-grafikkarten-austausch-geforce-treiber-drauflassen.html
https://www.computerbase.de/forum/showthread.php?t=1651797
https://www.computerbase.de/forum/showthread.php?t=1698426
http://www.pcmasters.de/forum/133034-pc-startet-nicht-nach-austausch-des-netzteil-s.html
http://www.pcmasters.de/forum/139545-pc-faehrt-nicht-hoch-nach-hardware-austausch.html
http://www.pcmasters.de/forum/123750-computer-booted-nicht.html
https://www.winboard.org/vista-installation/68751-pc-booted-nicht-mehr.html
https://www.computerbase.de/forum/showthread.php?t=1712051
https://www.computerbase.de/forum/showthread.php?t=1686184
https://www.computerbase.de/forum/showthread.php?t=1698505
https://www.drwindows.de/windows-10-desktop/100512-windows-10-booted-mehr.html
http://www.pcmasters.de/forum/127113-graka-reagiert-nicht-mehr-nach-austausch-des-netzteils.html
https://www.computerbase.de/forum/showthread.php?t=1674631
https://www.drwindows.de/hardware-and-treiber/136743-checksum-error-geht-weg-baterie-austausch.html
https://www.computerbase.de/forum/showthread.php?t=1705713