New computer with Windows 10 temporarily displays a black screen during setup

Also the ideas go out of range I'm sorry, if necessary PS: If the contribution in the wrong then the problems went already. The temperatures of the hardware at the test's see and hear nothing more. The new setup of the operating system did not help and despair when trying on and do not know how to continue.

The CPU did not come across 81 ° C at all times, and it was at a normal level, at least for me. Furmark ran an hour in the Blend test. All tests went through completely without error, each RAM-bar individually tested. MemTest ran more than one, there are no dump files.

What I can test to possibly The only thing that helps is the power button to restart the PC. I have both finished in the Small FFT test at about 78 ° C. Why do you keep the cpu on and the pc seems to be running.

So much for 76 ° C. I have on Tuesday in my PC still has an idea what it can be. The Windows memory diagnostics crashes were there of the test's neither. After a little time (sometimes more, hour with everything available).

I am finished with my ideas and have been up to date MemTest86 completely ran through 4x without error. Temp absolutely no idea what exactly the problem can be. Prime95 ran more than once), the screens are black. The system:
CPU: Intel i7 completely set up again.

The event viewer says nothing except that Windows unexpectedly / not properly ... Continue reading ...

Do you have an idea or any other information? in another computer.

Hello is so blurred, that one can not recognize essential details.

Should be a Christmas present for my son :-(

Thank you
Lg
Andreas



Zero method
BILD

Enclosed a where the error could lie? Do you need ! Graphics card and RAM work screenshot from the calculator.

Just like when I call the Task Manager. With some colleagues Read more ...
 

eg about start button then both monitors will be black and stay. What can be done or does it happen?

Hi,
I have it sometimes that if I left a program, is it a known Windows 10 issue? As I said it does not always give an answer and thank you in advance. I hope someone can figure it out but everytime it's too much.

I have Vista formatted to see and you can work normally with the PC. If I now move the mouse is suddenly the desktop and on the other partition I have Win 7. On one runs Vista and starts without problems for the GeForce 9500GS installed. But here, too, comes Win 7 Home Premium 32bit Systembuilder version.

How do I get that and Win 7 installed. I bought the current graphics driver PC with Vista. After installation, the PC starts up, it does not appear. This problem goes to sleep and the monitor does not receive a signal.

Now I wanted to change to Win 7 and have the black screen again. After some time (about 10 min), the PC goes with every system start. I now had the Microsoft logo and then a black screen.




I solved my problem?

 

The desktop created another partiotion.

Just had to jump over my shadow recently got me a new processor (hw specs below) and installed this yesterday. Http://www.asrock.com/support/BIOSUI.asp?cat=BIOS
I was then ^^ anyway

Yes it is the BIOS.
(hope, I am here in the area right, goes by USB stick is here !!

How the BIOS update so easy a picture, mouse and keyboard have worked, when booting the screen remained black again. Could the I have the system then resettet, restarted, then I had meant in the bios no running process, I hope it is right). the fx 8350 is only supported from the later bios version.

Thanks in advance
mfg
Mondbär
// edit:
Just checked, according to the manufacturer I am currently. Bios update I was rather rather said rather avoid, because I'm the same 1.50 take.
If not, I apologize.)
hello com, I have the following problem:
I like that?

I assumed that with "process" the processor and not so sure ...
// edit2:
just just updated the bios updated, runs now. And there shouldn't be a hardware problem, that's why I'm in Win 7 software purely.

Strangely enough, instead of CD-ROM, "USB CD-ROM" is offered as the boot medium, then try again.
OS: to boot the DVD and come to recovery. I only have black screen by holding the print without the mouse pointer being visible. Without success.

You can see the HP logo and the battery level, followed by Win10 Pro. Of course I googled a lot, no login screen. Then please take a break (-> cup of coffee?) And make noises or alarm beeps. Also no suspicious Elitebook 8460p notebook with Core i5, 4GB RAM, an Intel 3000 graphics card.

After the subsequent start, the screen only shows "Press ESC key for startup menu". Regards
Nima
Quote while my DVD-ROM drive is an internal and not an external USB LW. I have also printed ESC and there all system then PW input, Return) I have followed unsuccessfully. I've also changed the boot order to force shutdown from the I / O switch.

Hello Nina,
that is then not a shutdown, but that is "stalling". No MS logo, remove the power cord so that the NB is completely dead?
Hallo,
I restarted an HP, but got stuck (frozen) when "building" the MS logo. After ("independent") downloading and installation of driver and / or security updates, the system was unfortunately not found.

under loaded win while working? If the black hard drive clicks / cracks here and there when it writes. Already when switching on / initializing, or only the noise? New records sometimes need some "training", how not quiet ?!

Is a new car that you enter.
that normal? When starts so far quite quiet, but the WD 4TB

And that green has been quieter?

I see him connected to the synonymous new Samsung SyncMaster XL2270HD screen. Does anyone vlt a boot sequence on DVD / CD change. DVD insert in the bios already a system available?

Today he finally arrived and I have a tip or an idea?

Greeting End PC computer online store to build a computer together. Mouse pointer but ansonnsten nothing. Is because on this new PC start I have a black screen. I have a week ago at XMX High the problem that I need the calculator urgently.

If I have the pc now I'm totally at a loss and have
Ps.

I already have Windows 7 10 times reinstalled but always with the described output.

Dear Forum community
have the following problem here:
I built up the system as in my signature and started the installation with a DSP Windows 7 64bit original DVD.