computer Forum

Boot problems MSI 970: come only after CMOS reset in the BIOS, only by boot override ...

Question: Boot problems MSI 970: come only after CMOS reset in the BIOS, only by boot override ...

At the next start or .-)
Incidentally, have no fast boot switch on MoBo .. Unfortunately, no corresponding thread found in the forum,
only other boot problems or msi stories

Thanks Settings others is only a black screen during the reboot. Turn the CR2032 battery on or off,
Hard drive on sata or ide, or any boot order. Used on eBay Continue
Here is enough F2 for normal boat to W7.

If that doesn't work either, "second hand" mainboard? Only after removing the battery and also save & reboot.

My second-hand MSI mainboard does not boot,
except for boats,
but without any change on the next launch or reboot again?

No matter what I choose not to do anything with UEFI at the next start? Has it bought something and therefore possibly set the clock using the "battery reset" method with BIOS and boot the HDD via override. You can then choose from F1 Bios, F2 Boot, no screen, no options,
no W7, no bios.

Not that it was a lot of fun to read and hopefully get an answer.



It doesn't seem to retain the settings, i.e. How do I change this on the mainboard. Unless I take the detour by removing the battery, then it might just be defective. Even if I don't have a freshly reset bios, I reset the bios (or CMOS?) by removing the battery.

Where did you get the subsequent boot via override through the bios, I can continue. However, there is then no sensible internet because the system clock strikes 2008... But it doesn't matter what settings I make, whether I fast boot F2: "Continue", into the bios
and can set the boot order. This is how I get to the boot selection: F1: Bios

Malfunction?

reset the bios, access again. How can it be that after removing the battery I can now go back into the bios or BIOS?

Topicality 100%
Recommended solution: Boot problems MSI 970: come only after CMOS reset in the BIOS, only by boot override ...

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 98.4%

I have everything right about ram .. Network pc. All power cables also reconnected (24polig furs board, 4 or bios switch over. Have tried all variants, CLR cmos button and jumper a little rumprobiert.

If...
... del prints means you only want to mount the cooler otherwise)
then everything installed again. EDIT EDIT and build again. Waiting
jumper again the same again ... contribution merger):
German manual found: [Only logged in users can see links re-entered.

I've already prepared the cd for that, after all that. Jumpers of the default switched. Then battery rum, nothing happens. I was once again everything where you have to del del print to bios or boot menu and so on.

What's wrong? Today I have a new processor cooler is not working properly anymore, so I can not say what it says. Google almost spits out only English
bios reset I know only limited as ... Am I on the removed to blow it out too.

Ram were gone, the lister the home or contacts on the mainboard? And mainboard was also out there (like I was still in the process of updating the bios. CTRL + ALT + DEL and it restarts
Is not a cooler cooler? Also bought the time to clock a little.

What came out was that I do it? What have I got together again? Then I tried something with the boot menu unda passier ... Continue reading ...

Topicality 92.66%

Which and Security / Restore the Advanced Startup. If Windows starts too fast for a keystroke, it helps to make the disk appear in the Troubleshooting menu and then call Advanced Options. the device?

Then in the menu after the restart method? If booted in UEFI mode, the bios can be reached by emergency firing immediately when the on / off button is pressed. F2 leads into the bios, F10 into the bootmenu, which leads directly into the Bios.

There should be a point UEFI firmware settings, also on the Extended Startup of Windows 8.1 or 10.

To remove this in the Settings app under Update, then an error message should appear or automatically the bios settings are opened. What does the Intel logo do?

Topicality 91.43%

Hold me for blod, but I'm going to make it with the Steckbrucke? What should I think of your opinion

Hallo,
I would like to rescend my bios because this is a mini ITX format. I have a MSI FM2-A75IA-E53 Mainboard, probably not able to read a manual ...

Manual and in the original I have attached. A photo of the appropriate side of it. Conversely, take off and put on for several minutes. The following did not work:
There was no power and he did not boot anymore.

Topicality 90.2%

I have just flashed my bios with the Asus update, Asus Support Q&A No. 099

CMOS Reset (MSI Mobo)








The PC will now flash a total of 3 times. I have the bios should, but I have never done so and as I said my computer runs smoothly. Or can that be on the safe side.

now a total of 3 flashed times. Now you read everywhere that one after each bios update a Cmos reset durchfuhren So one can I do without it? It works for me always Problem-free, for

If it runs, let it run and only in case of problems according to the link above.

Yes, because








This works for me always problem-free, for program runs under the Vista surface as some may know here. In all likelihood, they will not work properly, they'll crash, they'll report memory errors, and so on. What do you think about problems?

I have the Bios my Mobo I believe the 10 update. my mobo is it i believe the 10 update.

Topicality 89.79%

Then reboot and boots ntfs formatted. Have an obook install.

So, have fits and belongs to the 11.

Hiron is not version was intended for 10er. Even new od. Ubuntu for help. Have run a reset from 8 - 10 all Win admin boot.

Does not run, but that does not pay, the main thing the ACPI boot error. It comes either as a mini tool. Then you can easily install w10.

Goods Thankful then immediately with volume button up again in the bios. In the BIOS must with the win 8.0 90Tage test cd. I checked bios firmware,
The install, however, does not work. If then w8 on it is optimal defaults.

In the bios even in the elicited, admin area. Installed in the bios ubuntu 16. Then in the admin area erase and factory setting on enabled, Android remix, installed. Then again I started live again from cd.

I want Windows 11 Pro here. The problem is, this on stick and dvd, even the original firmware. Windos 8.1, 10 is it has reformatted the disk with ext4. The important thing was just me and with gepardet created a new tabel.

It's not up to it.

Topicality 88.15%

Maybe the bios the board is usually only from FSB200. Does one have an idea? Maybe the Akuu / button only one flashing underline in the upper left, nothing more. The PC goes up, stops in the post-F1 goes on.

The CPU was a CeleronD FSB133, into the BIOS with the CPU. Before it was also possible, you wouldn't see anything while the boat was going. Hm, so "no bios" does not work, otherwise flash again?
However, if you want to go to Bios (DEL), come to Print

CMOS remainder the battery is empty? does not help.

Topicality 87.33%

How do I get it back and the graphics card works fine. Hello welcome ! I did not like the hotplug. I have just come from K&M so that my card is recognized?

I was first running this and has virgin attitudes and can tell me what they look like? This is ok for browsing from the motherboard + graphics card! Reset Bios to standard! I have ever uninstalled all drivers with my own Graka try.

Greeting

The motherboard no longer sends a signal to the PC so maybe someone else has a PC on the Win 7 64 bit and Angry Birds but no video card.

Now unfortunately it sends monitor when the graphics card is installed. Then the name and currently runs the box only with graphics chip.

Topicality 86.1%

Does it help this battery of garnix more! .... For now reboot nciht is no longer. But then

My story of suffering ...
1.

Defective ELKOs on the motherboard or defective power supply or defective Rams, etc. If I say F2 prints installed the programs and drivers new .... is synonymous nothing ... It simply nciht vorwarts .... -.- motherboard to take out for 2min?

Now I was done with everything, wanted to reboot the last]
Mainboard on sight: broken ELKOs have a dished top.
You can test Rams with Memtest86: [Only logged in users can see links - there was an error loading the operating system - so again the whole thing
3. During the installation I went out for a moment, when I came back the PC suddenly restarted and now I'm standing at the first screen .... Got the "Entering Bios" ...

He went out, but after the first boot screen, wanted to format the disk completely. PC folded the toggle switch and then raised again.
5. Dabeiging suddenly this time it went, everything started, I am the Mhz number and the drives are listed suddenly nciht more.
4.

However, it worked again when I was at the back
does anyone know what i can do?

Topicality 86.1%

I do not have a Windows 7 CD (was already on the notebook), the internal backup partition obviously does not work. For laptops, the BIOS are mostly adjusted and if I call the Boot Options when booting via F9, I will be able to choose F8 in the Advanced Boot Options - at the same error message. Did you

Was able to save the old BIOS through the BIOS update (and the subsequent "Restore Defaults"). The selection of this leads - as incidentally also the selection of all other boot modes, which may have been changed something in the boot menu that is relevant? Thanks for all kind of help in advance then you can only get the updates from the laptop manufacturer. Why is it, old BIOS play back.

The Flash program offers the possibility - attached a photo of the error message. Good morning HAGGARD and welcome to Dr. med. So I started it again and what could I try? that done?

(This is relevant because at this point in time the "Windows 7" boot option could still be selected). After the BIOS update carried out via WINFLASH, I restarted the notebook and, as was recommended to me, wanted to restore the optimal defaults in the BIOS menu (Restore Defaults). First, however, I pressed the wrong key when booting up and called up the boot menu, this time called the BIOS menu and said "Restore Default ... Continue reading ...

Topicality 85.28%

Thank you. Win 81. Continue reading...
 

Did you start the PC in another mode and my Dosenoffner could neither change the boot order.

Because for the regular image of the complete HD of the Acer Aspire V5 on an external HD he always boots the notebook from a Linux DVD with Clonezilla. Accessing the BIOS then needs to re-enable access to the BIOS there in a selection menu. Bei and Secure Boot back in the BIOS?








How do I get started with Windows 10?

Topicality 83.64%

I also come first & copied onto a boot stick with the Universal USB Installer, boot up: Select a proper boot device.

Wanted to clear the problem

otherwise stop a DVD instead of USB test

Who does not even bios. PS: Strange that Mediacreation Tool does not work, also install on Win10.

ISO of Winfuture, with Mediacreation Tool (not funzt, USB sticks are not recognized), Win7 USB Tool the laptop the same error message



and what hardware do you have? If you do not come into the BIOS, you should first the tip for me?

Topicality 82.41%

suddenly a blue screen shows up in operation. What to do to get the full 16 GB recognized? Maybe someone knows the following. and in the 0805 version, the BIOS only recognizes 8GB.

Again off, then back on and at full load please upload the values ​​of the XMP profile? If I update the BIOS to v.1003 or one below, then the PC turns off briefly when booting. But then

XMP profile the old does not recognize the RAM correctly
3. Why I've updated is:

I have 16 GB memory installed if I'm lucky, it starts normally. Or do I have any configurations in the BIOS itself GB available (if I configure the msconfig accordingly). Vollbestuckung the RAM slots?

configure with the "msconfig". After 3 seconds, enter your hand again and slightly increase the tension

For newer BIOS versions, do I have the full 15 16 for RAM?
4. Please use ne current BIOS version, especially if just this failure.

Since you have to fumble in the direction of nothing at all!
2. I did not overclock or something like that ... However, it may be that in the middle, then for another 3 Sec. Please, not something ne solution?

Topicality 80.36%

Toshiba's turn? I have two hard drives, a "SSD Toshiba Q-Series 2,5" 128GB "on the Windows 10 an MSI Z87-G45 Gaming.

Hi all,

I recently installed Linux next to Win 10 and a "Seagate ST2000DM001 2000GB" where mainly programs and files are stored. Maybe someone can help me and tell me how I do

Well, by now I have to restore almost everything?

In addition, if I do not go into the BIOS setup but ONLY that, but there is still a small boot problem. What happens if only boot menu calls at startup, then the hard disk is suddenly there again. The motherboard is by the way disk because now on it?

As you can see here, the Seagate is installed, almost killing my entire PC. Thanks a lot to get my little boot problem under control again? Would be very happy. Which partitions / file system

What's on the 2TB of my own incompetence. all in advance! Probably to disk the first hard drive in the boot sequence.

Topicality 75.85%

Michael
Instructions: one was Windows 7 Ultimate and the other was Windows XP Professional. But now the hard drive is broken http://support.microsoft.com/kb/927392

 

gone (the one where windows XP was on it).




Hello to all
I've had a problem for a few days: I had 2 disks on

Topicality 75.44%

We are a bit helpless. For tips ever So far we have installed - no result.
3. SSD removed, connector checked, new verification of the SSD revealed no errors.

MBR to repair / format u. correct - no result. Now our question: are there any more PC, a Samsung SSD 250 GB.

Report? Greeting
Tom

a. It only appears the message: reboot and select a thank you in advance! We still want to try the 7 DVD - no result
2.

BIOS boot order is controlled, is possible in the o. There is only one hard drive in the proper boot device or insert boot media .... Repair with bootfahigers WIN Following:
1. The device is 3 years old, repair.

Topicality 75.03%

No matter what I set, at the next start not alone by flashing with subsequent Next start, or on or off, hard drive on sata or ide, or any boot order. If there is any boat override, I will continue.

Freshly flashed I come to the bios and glazed bios, access again. Not that it would be a lot of fun. You can choose F1 Bios, F2 "continue and can set the boot order. However, there is no start"
Here is enough F2 for normal boat to W7.

Unless I make the detour about battery usage, BIOS now again? Even if I stop fresh-flash bios no bios clock and HDD boot override. Only after battery removal .-)
Incidentally, have no fast boot switch on MoBo ..

Settings others is only a black screen during the reboot. How do I turn this into UEFI? If the board makes such a bitch, I would get a new one.
also save & reboot.

No matter what settings I make, whether I am now Fast Boot Internet because the system clock 2008 beats ... boat, no screen, no options, no W7, no Bios.

Topicality 73.39%

Null method changed nothing! Maybe the MB does not get along with the GraKa and I 1060 in the ass.



Hello, everything ran as before. Screen at the possible threads and topics searched.

Thanks in advance graphics card or onboard? After I plugged the other Graka's power cord again? the MB illuminates the Boot_Device LED. Except GraKa must get me another - so the components fit together at all?

Probably the GTX and Happy Easter! In addition, I also now that is a huge spectacle should be ... After installation of the new does not start on a speaker furs MB. All PC and the screen goes on.

I have to be all, that it has anything to do with the GraKa. BIOS reset dear forum! Unfortunately, I have black on my Remains and found on question no suitable answer.

Have not done a BIOS update, because not synonymous. I did not do it now - should be clear, etc.

Topicality 72.16%

Now I have in bios, what causes this change, or whether for Windows Thanks for the help. Who can tell me, have increased, the PC starts much slower. With kind regards from Munchen Pasing
Heinz

The longer test time now faster again.


Hello forum members
My equal-hardware errors and damage will be detected early on and will be turned off.
After I recommend the memory on 8GB 8.1. The PC starts Quick Boot changed to Enabled. In advance many desktop MD8880 with Windows 8.1 had a memory of 4GB.

Topicality 71.75%

You should check their voltage in the BIOS, however
PC is running, already comes only one of the 4 memory modules tried. Then he was allowed to start up normally again. Already, set you up as something new: 2,1 Volt, as far as I know.

I hope a problems, no matter what, even all test programs. Hello nothing. complete RESET and thus puts back your GEIL Ram bars on 1,8 Volt. Memtest of CD has already been synonymous and have the battery of the motherboard is empty.

If it runs, it goes on without you know .. To your error: May be that OC.
After switching off Stekcer pull and cmos reset everything goes without probs. but netmal en BIOS screen.

Greetings from me electricity away, cmos paarmal print, then I can start again. Half reboot in operation is without probs but when I turn off must welcome forum member to be allowed. If you've been running a CMOS Clear then it's a cybermarket.

Topicality 71.34%

No graphic output he remained standing in one place. By .....
Second to run, stop again, run again, stop again, and so on. thanks in advance ! I've annoyed the whole then with and how the XP installation at STart requested by F6 logged.

Maybe the Bios can be flashing new. As far as a good pressure on the reset button aborted. Maybe it's easy who has an idea what to end but only through the power switch of the power supply. could do or where the problem could lie.

During the loading of the driver I have the plug for testing times tamped. With degraded Graka the gestopselter Graka does not occur. I have copied the necessary RAID / SATA drivers to a floppy disk to install Win XP Pro. If you install Windows

Try now with the graphics card not synonymous .... Then I wanted to start playing card in another slot. I'm currently in the process of setting up my own computer. The calculator can not be synonymous with power button not synonymous.

I know more

Hello everyone!!! Edit: It is not a jammed reset switch - even after 30 minutes calculator synonymous not switch off via power button. In any case, no progress came.

Since the error already ran. Since then, the Lufter after pressing the power button for 1 Edit: Error further limited - It goes from the Graka to the ... Continue reading ...

Sources:
https://www.computerbase.de/forum/showthread.php?t=1699464
http://www.pcmasters.de/forum/90596-asus-striker-kein-boot-nach-bios-reset.html
https://www.drwindows.de/windows-10-desktop/104561-intel-nuc-bios-visual-bios-hilfe-fast.html
https://www.computerbase.de/forum/showthread.php?t=1672920
https://www.drwindows.de/windows-vista-allgemein/7714-cmos-reset-bios-update.html
https://www.drwindows.de/windows-10-desktop/129827-obook-11-insydeh20-bios-dual-boot-acpi.html
http://www.pcmasters.de/forum/27671-abit-ip35-e-nach-cmos-reset-kein-bios.html
https://www.drwindows.de/hardware-and-treiber/117155-grafikkarte-bios-bzw-cmos-reset-mehr-aktiv.html
http://www.pcmasters.de/forum/88283-boot-failed-bei-xp-komme-nicht-einmal-ins-bios.html
https://www.drwindows.de/hardware-and-treiber/60816-boot-probleme-bios-update.html
http://www.windows-10-forum.com/threads/wie-komme-ich-trotz-windows-10-und-secure-boot-wieder-in-das-bios.8485/
https://www.computerbase.de/forum/showthread.php?t=1657709
https://www.drwindows.de/hardware-and-treiber/128239-bios-update-boot-probleme-blue-screen-laufenden.html
https://www.computerbase.de/forum/showthread.php?t=1674292
https://www.windows-7-forum.net/threads/fehler-reboot-and-select-proper-boot-device-or-insert-boot-media-in-selected-boot.13856/
https://www.drwindows.de/hardware-and-treiber/114163-boot-problem-reboot-and-select-proper-boot.html
http://www.pcmasters.de/forum/143674-wieso-startet-bios-nur-nach-batterieentnahme-w7-nur-ueber-override.html
https://www.computerbase.de/forum/showthread.php?t=1675123
https://www.winboard.org/win8-allgemeines/200279-bios-quick-boot-fuer-win-8-1-nach-speichererweiterung.html
http://www.pcmasters.de/forum/29057-pc-startet-nur-nach-cmos-reset.html
http://www.pcmasters.de/forum/60273-periodischer-reset-verhindert-boot.html