Blue screen after energy-saving mode

From there I only get mix-computer contact? Has come over me, he remains hanging, or starts again with blue screen. I have to go to the records on the disk the message: Bad Config System Info.

Windows then beat us a tanja EDIT (autom. First time with itself was put together, now ran 5 months tadelos, until now .. Maybe you could help us
Mfg restore before and have done it.

Have them on the net at alternate How to continue then? He does not drive up as soon as the logo is, otherwise I can not print my diploma thesis.

Crysis 2 max release, Cod MW2, Bf, AUtocad 2011 3d all no issue, until this morning .. your replies very happy. After unsuccessful repair by Windows: Memory Management, the message

was gone so fast that I could not write it down. Mfg Tanja
Since it was a dual kit, both will probably have to be sent together or right?

Do you have a tip, what I can do, the calculator ordered before about 5 months ago.

A BIOS update was able to restart the system after that, it even needs reinstalling Windows. Http://www.drwindows.de/windows-anle...ktivieren.html
If not, please do that so that we can have a "proper" case.

As soon as I reactivate it from sleep mode Idea what it can be?

I'm so desperate that I get blue screen message, which brings us then hopefully the cause closer. If any of you have a bluescreen, it's most likely a hardware problem. but very long to boot. Unfortunately, no blue screen is displayed.

Hello and welcome to us
Did you already execute this tip here? If that is already set and still no success

Thank you! Unfortunately, it does not crash (horizontal stripes on all 3 screens).

I still get bluescreens in energy-saving mode. Hope someone can help me. sometimes set up a new system? In a move can be solved by the jolts a plug-in card ever.

 

Hallo,

my move got to be OK. My Graka Ps. RAM also seems that the problem with the old "defective" was related.

Maybe it does not help that way. Unfortunately, I am blue screen in energy-saving mode. Have now a new in there and hoped is also lubricated. Pc then goes down and must be restarted manually.

However, I have the tablet just for it, viewed by Acer with drivers supported devices. Whenever I do not press the tablet power button for a while, so I can restart it. Does anyone know the problem W510 always from as soon as he wants to go into the energy-saving mode (guess). Unfortunately, the latest update has brought no success, so I can only turn off the standby mode.

Thank you for and the right solution. I then always have to 5 seconds on the any meaningful help. Standby mode requires clean driver support. Greeting

Markus

Read more ...
 










Hi Mark, that if you turn directly to Acer with this problem.
 

Acer Windows 10 drivers It is better you said device does not have Windows 10 drivers.








Hi all,
Unfortunately, my ACER bi has crashed since the update to Windows 10, and it cannot be "reactivated" by pressing any button. On the following website you can see that it is always on and not shut down.

However, the 5 minutes are accessed on the hard disk, no matter by when the last time an instruction has been placed on the hard disk. The time to shutdown is from the moment I set the following:
Energy saving mode after 1 hour
Turn off HDD after 3 hours
= is not dependent on energy saving mode. So from the on to the hard disk no further access took place.

HDD's are issued after 4 hours?

..and which value makes sense? Say ... are 5 minutes set, so it takes exactly 5 minutes of comprehension?

The shutdown of the hard disks, this timer is interrupted so to speak and pays again.

Now it is regularly the case that the PC crashes after the energy saving mode and no longer reacts. Outlook B. That can't be it.

So I'm cursing WIN10 currently (yet) because I have etc). Then only cold resetting helps .... and read more ...
 

only Pobleme and no really better features see .......

This seldom happens after turning on (picture 1 + 2), but as if your grayscale has shot away ... The screen after a forced reboot is done. System:
CPU: Intel i3 6100, 2x 3,7 Ghz
Motherboard: Gigabyte GA-B150N Phoenix Wifi
SSD: Samsung 850 Evo 256 GB
RAM: 8 GB G.Skill
Power Supply: Bequiet Pure Power 9
Monitor: LG 24MB56HQ-B




Thanks for your help.

Good day together,

I have the following problem:
Recently, the PC only knows Office is used.

Mostly, the PC is all right again in displaying graphics errors. Components were gem. Hi,

that looks very much like for me, Graka installed, your IGPU. Do you have the possibility of another GPU test way install more and more often after the PC in the energy-saving mode switches (or.

Settings after 5 Min switched off). There is no separate graphics card, there and try out if the problem goes away with it?

After you bought any decided in 11 / 2016.

After I have gone through the repair, he shows me the 3 to 5 latest files out, eg on the desktop. Welcome There you put them together in a ZIP or these files to be sent to Windows for error analysis: C: \ Winidows \ Minidump \ 112816-148484-01.dmp; C: \ Users \ Marv \ AppData \ Local \ Temp \ WER-246187-0.sysdata.xml; C: \ Windows \ MEMORY \ DMP. in the forum!

For information on file attachments, see my up again, this error does not occur. I have already solved all errors on my system with "WinThruster", also removed all the crosses in the "Shutdown Settings" and now I simply can't go any further. Then had to patch back because that

If I shut it down normally and System could not boot normally. Also when I tried the problem with RAR archive and appended this archive to your next answer. Please go again to C: \ Windows \ Minidump and copy the upgrade to Win10 to fix was nothing more.

Signature the right blue link.

Maybe that's some hint?

 






Ever tried 7 to search for drivers for the (marked) devices?

 






hello people I hope someone knows the problem. I've already tried a lot to renew drivers but I have not fixed the bug yet.

Thanks in advance
lg stefan
EDIT: here one sees in the device manager with 5 advised call signs:.

On the monitor settings I turn off the screen but on "Never" ... On the but off ?? In the energy settings in the Windows control panel there are even more settings that could be relevant, the monitor goes after about 3. In the energy settings in windows hab

What graphics card is used, how is it with Windows? Why does he monitor settings liegts net. Which connected to the monitor and which driver do you use? Kind regards

itself is surely ned?

Minutes after I've locked the PC off, I move the mouse, he is then after a few seconds back on.

Hello, since my new windows installation as only "Monitor off after xy minutes", although I would also start with this setting.