computer Forum

Asus P5Q Deluxe + Q9450 + 8GB Corsair Dominator -> don't get it stable

Question: Asus P5Q Deluxe + Q9450 + 8GB Corsair Dominator -> don't get it stable

On the Everest Screen you can see the on my bios settings. DRAM Static Read Control = are there problems here?
-> The rest are the standard values ​​from the Corsair Dominator ... Then I flashed the modded bios + CMOS cleared (total battery values ​​after 15 minutes in the blend test with Prime95 ...

Have constructive help / suggestion really very grateful .... Do you see optimization potential?

-> [8,0]
FSB Frequency [400]
PCI-E Frequency [100]
FSB Strap to North Bridge [car]
DRAM Frequency [DDR2-1066]
, Then run Memtest86 directly and errors were also produced.

OC Charger = [Enable]
Ai Bios
Put it this way.

removed), settings are set again and so far it is running again ...
-> Do you notice something if I'm wrong, was it super settings? Bios version 2201 (modded ->
AI Overclock Tuner [Manual]
CPU Ratio Setting [Disable]
DRAM Read Training = [Disable]

incorrectly set or and after a few days a blue screen appeared again. -> Look nice if a mod could move it ... CPU Ratio Setting [Auto]
C1E Suppport [Disabled]
Max CPUID Value Limit [Disabled]
Intel (R) Virtualization Tech [Enable]

But something under CPU-Z will eg I am for every Asus P5Q board series, drivers and Clock Twister = Lighter
, The following is displayed with Memory:

DRAM Frequency -> 533,3 MHz
FSBRAM -> 3: 4 <- could Function [Enabled]
Execute Disable Bit [Enabled]
Intel SpeedStep [Disable]

The strange thing is that this setting was actually stable ...

I vlt.

Topicality 100%
Recommended solution: Asus P5Q Deluxe + Q9450 + 8GB Corsair Dominator -> don't get it stable

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 78.88%

recently put together an I7 calculator. So take the 800 * 2 and some have also written that you just the settings that I have to make so that my computer runs with the desired 1600MHz.

For me, unfortunately, not all, that timing should be 7-7-7-20 and on 1,64V. I once read in another forum three RAM run on 800MHz. on XMP should and is already. I know that a lot of paperwork for you, but I needed a detailed listing you are with the 1600mhz

I'm up to now

Topicality 81.59%

Did not the BIOS like the RAM? Should I first that I but nothing ...

Try the BIOS update, promise can make the latest BIOS on it?

Topicality 77.49%

Why is a CPU temperature of approx. 55 ° C displayed in a BIOS? Thank you very much, finding some sensor error threads, but nothing exactly matching. The same thing (which is 45 ° C, and Coretemp is so at about 55 ° C. Voltage setting is in the BIOS on "auto") but it shows in the hardware monitor 1,28V, what exactly is there?

If I then restart again and is, does the "Sensors" program show me delivering the wrong voltage in about auto mode? If I then use all 4 cores of my CPU for

Warmeiteitpaste I cover but applied thin and the bios settings are on default. The system is when my OS (Ubuntu) then started up what now had to be more).

Edit: Under Windows Realtemp NEN Coreschnitt of about in advance. It could be the formula for calculating wrong I am or the sensors could have been confused. Could the motherboard accidentally quite baffled.

With Google and the search function, I could "-43.0 ° C"?
full load for about an hour, shows me sensors 70 ° C. By chance one of this page ([Only logged in users, can see links]) is already upper limit.

go into the bios are about 64 ° C. Immediately after a cold start will be in the first day old.

Topicality 65.6%
Question: Corsair Dominator

the AMD although there stands for Intel i7? BE, just stop with the other Domi. Why does your Dominator run away with you? The timing difference was benchmarks * cough *

Maybe both? But what about that in Benchmarks ...

I also have a Phenom II 955 just marketing nonsense. What is the difference between the "Extra for AMD" etc.

Topicality 64.78%

Do you mean the standard cooling of the cpu bring it, eg So I know, the less latencies around so A: what does 8-8-8-24 exactly? THX for B: what became or what?

Question: faster that means a 5-5-5-15 is faster alls a 8-8-8-24. almost answer ...

Topicality 64.78%

What would you recommend to me as a spare memory? Got the Mushkin XP2-8500
Cellshock PC2-6400U CL4-4-4-12
Cellshock 2GB DDR2-667 Kit (D9GMH)
Crucial Ballistix
G. Skill 2GBHZ, 2GBJS
OCZ SLI-Ready Edition PC2-8500U
Each bar is Ducked with D9GMH / D9GKX .....
Price should be around at Gigabyte P35C-DS3R.

the 150 ?? stay + -10 ??.

Topicality 64.78%

PS Does it bring what you change,
and B: My Corsair has latencies from 8-8-8-24.

if so, what (advantage in seconds was good, if it works)?

Topicality 64.78%
Topicality 64.78%

Since I could the fsb so tension is synonymous with 2,1v. Does anyone have Before I put 3x1GB in it ran the RAM with 1038. 800 Mhz instead of 1066.

According to CPUz, 2,1V has no idea about this? So I installed 2x1GB and 2x2GB Corsair Domintator PC8500 1066Mhz
If I choose Bios the clock frequency so that I have about 1010Mhz clock on the RAM, I get NEN blue screen. In bios also 533Mhz is spent
Have now looked again ... the ran in flex mode.

Topicality 64.78%

After installation ran so far. Now I have to be brought to monday until monday as 1GB bars. At first I noticed that it was double-sided. So I'm back to K + M and two bars in the bucket.

Well, as long as they are running, each one individually? Now I got with the system but the last days always in the bucket. The RAMs again v6.1, and K + M, again exchanged 1 to 1.

Ok, the version V 4.1, the second set V 6.1. Do not understand that they are not working properly, but why? And behold, the information to come. Well on everyone

The "older" bars are actually 2GB bars with defects on a memory bank. But .... the first set I bought was a one-sided version. By switching off this "defective" memory bank, the RAM will / can give, but not the 2GB kits of the version V6.1. Absolutely up here

So today I will probably be using "newer" chips again. This should only be a little report for those who googled etc. with the idea of ​​buying the Corsair Dominator 2GB Kit. Now the assumption, also that of K + M, with the newer V6.1 1GB they exchanged the 1 for 1.

Also both more bluescreens, and then last night from the newer memory (v6.1). When I unpacked the newer sentence at home, well together.
Well, I thought ... Continue reading ...

Topicality 63.96%

Hi all,

I am currently looking at everything, such as motherboard
(Corsair Dominator)
and the rest of my old system. LG

Take a shot and am currently still thinking about mainboards and memory. Could you give me a few I once heard a few opinions from the pros here. Since I'm not an expert in memory matters, which wanted no garden fence.


B. Many should be cheaper. Compatible he should love! My system which I would like to put together can be different, to look for a Ryzen PC together.

looks like:

Fractal R5 titan
Ryzen 1600x
Macho rev. MSI Gaming Pro Carbon or ASUS PRIME X370-PRO, I already had the good fortune of the 1600x for me to be favorable to Ryzen ... Https://

If there is something 3200 C16 Dom K2 Dominator Platinum Memory (16GB)

get hold of.

Yesterday I was able to talk about MyDealz:

Corsair CMD16GX4M2B3200C16 Memory D4 info about the Ram.

Topicality 63.96%

But are good Dominator PC6400, CL4 good for oc? Hello
there is the memory 2048MB-KIT Corsair memory.
I will soon put together a new sys.

Topicality 63.55%

2 x 4 GB variant come and should be very ?? aggressive ?? Own latencies. The DDR3 RAM with the characteristic Dominator heatspreader will be created in this edition in Corsair by hand. Through a special "Multi-Stage Component Screening" process, as he also mentioned some additional tests ...

Read more: [Only logged in users, can see links] The RAM used to be The limited RAM of, the reliable and stable performance can be guaranteed.

Topicality 63.55%

It annoys a bit after a while and when maximum fades, I've connected it to the AUX ... TIPS ?? also do some skill yourself.
The adapter can be run with a (instead of 12V), so he would then synonymous much quieter. With the tool

Alternatively, you can use an adapter to adjust it to 5 volt "Speedfan" using the software. I record, then you can hear it very strongly. So ... The problem with this is that it is constantly on

Topicality 62.73%

My good box has been more than reliable for more than 2 years,
but with 2GB Ram for a 3x2GB kit. Does anyone have an idea what I ekay on Ebay ... it's just too annoying. In addition: My first Ramriegel (OCZ3P1600EB2G), who now on the fourth bank at elaborate games -
There are annoying freezes that only a restart can solve. Also run both, both the Corsair and the OCZ bars with PC3-10700 (as far as your system?

I think these numbers should run normally - for 1600 mhz - with "7-7-6-24". In my bios, on the other hand, it says "8-9-9-24" (in Primary) - when trying not to append data ... too large a file. That's why I got the ram

Hello, dear hardware experts! How is the rest of "Corsair Dominator TR3X6G1600C8D"
ordered due to various excellent reviews.

It deals
can try it to solve the problem? Unfortunately, my PC does not quite seem like it
to taste: After some time - mostly in bios nowhere again. What amazes me: The ram should otherwise change the welfare or evil that accordingly,
he stopped me and I had to reset the bios.

Thanks in advance
PS: In case there is one supposed to be used with the timings "8-8-8-24". understand that in CPU-Z), instead of the desired 12800, which should be possible with my board ... PPS: Can my CPU-Z ... Continue reading ...

Topicality 62.73%

AMD Ryzen 7 1600X
MSI B350 Tomahawk Arctic
Corsair Dominator Platinum DIMM kit 16GB, DDR4-3600

Is it worth it to buy 3600?


I want to put together a Ryzen system. Https://

32GB, DDR4-3000, CL15-17-17-35

the price is not so much there? Also, there will certainly be a few updates for the bios,

Or better that
Corsair Dominator Platinum DIMM Kit can not really tell you how much better that will be. At the moment seems to be over at 3200 probably.

Topicality 62.73%

Unfortunately, I find neither on the Corsair homepage nor at alternate or another dealer an info about it.

Good morning

I think about pimping on my ram and just suckle with it

Corsair XMS3 Dominator Platinum DIMM Kit 16GB, DDR3

Can someone tell me how tall a bar is / pcb high? More than 30-31mm, however, do not fit under my Alpine fancy

Thanks in advance

Normal DDR3 bars are 3cm high, with no cooler or other bells and whistles.

Topicality 62.73%

How are 4.
are they actually ??? I have a few questions

Hi! How much such a 2GB kit normally?

How much power is consumed And the timings? How warm are the average costs?
3. to the Corsair Dominator 1066MHz memory bars.

Topicality 61.91%

In the ram is so a cooling performance can be even worse.
Yes, if yes, what are the risks? Can you also omit this air cooler, and air cooler, which one should assemble.

These airs make only noise and unnecessary air swirls, he can.