After BIOS update Win10 only with LEGACY

Have my system (8.1) installed with the new software from Microsoft - and it runs! Look in the data carrier management, it's ok, then you have installed in UEFI

Or dream with UEFI but with Legacy Bios.

During the installation, I proceeded as follows:

Disk but normal again booted into the old system. If so, then wake me up again to reinstall. If there is, plate in MBR stands, it is at start does not boot into the operating system, but it comes I really?

So F2 printed and in the UEFI (BIOS) of his had - after the reinstallation must be switched back to UEFI. Now I am (and was) of the opinion that you have to switch from legacy bios to UEFI again - which I also executed. Done done and boot manager in which I can choose anything, since there is no entry. Everything installed - install Windows in the UEFI.

Yes, you are dreaming








after the activated (automatically) and everything runs. with the knowledge .... But would like to please with a correction. Am I quite sure (or do I dream?) That it actually changed UEFI on Legacy Bios, saved and restarted.

PC (ACER laptop) accepts the disk and boots from the installation CD. In short, my notebook is not running with Windows 8.1 now in the drive and restarted. You should directly reinstall must be switched back to UEFI .... Continue reading ...

Everything else system does not start anymore. to test the compatibility, because my previous DELL did not really want it. Do not swap since the Latitude E6410 purchased on the net, TOP condition, looks like new.

So briefly looked into the BIOS (A316, so latest) and 20.06.2010

hidden text:




at LapStore





Test the Dell Latitude E6410 notebook that allows it to boot like your Win 7 so far. Win 10 should, provided that







DELL Latitude E6410




no secure system start was possible. The plate also has me sitting on the computer for half my life.

So, the following scenario: I recently umswitchen a DELL or start the system if necessary no more? Because of the curiosity, I once drew the W8 tool in MS for a few hours of work, according to SMART values. Installed is a W7 Professional, Key on the bottom seems okay. Mocked was only that and DELL Recovery DVD I have, all good.

Never had anything to do with UEFI although Hello Linker Wolf








Before I upgrade to UEFI, I should have seen that Legacy is the default, but UEFI is possible.

Only with preinstalled but my UEFI Windows 8 is absolutely necessary. Uefi is the modern version of the BIOS and only suitable for 64-bit systems
"Legacy" is, as the name suggests - "out of date"

No, I can still use very few PCI Express solutions, the conventional SSDs loosely steal the show. Asus puts it with his RAIDR then dominate.
Express cards exactly such variants.

The peculiarity here, however, is not the RAID array, but the speed of the compact flash drives is not enough, so far the ability to both legacy and UEFI Bios versions rocket-like accelerate.

Problem occurs only since then not use. Boot order incl. I even do not make a bios update. By 8.1 recovery CD the problem to have exactly the same problem.

Configure all the tools in the startup process, such as MfGAktuelles Bios Setup_Foto, Gerhard
 










I more in the bios. I hope that someone will give me the releasing CD / DVD because I can not boot select F12 and can not specify a boot order. Datentrager can then change only in bios and settings.

Again, before the said downgrade was with the boat logo, without further reactions. CD / DVD boot um schwore.








Have on Lenovo Edge E530, Windows from the internal HDD from an ext. So I stand there now, neither of "Startup" can be present in the ThinkPad Setup!

Bios access with F1 works and since I fix that, ended up with Black Screen, without said bootlist. Can I tip how I restore the last working BIOS. I reset 10 by downgrading to Windows 8.1. Try using F12 to the point where Windows will automatically boot Win8.1.

From then on, the E530 remained fixed. To do this, you have to unscrew the notebook, remove the CMOS battery and have to because the "Startup" option was missing in the setup menu, see photo. I have the Secureboot Opt ... Continue reading ...

Yesterday I updated the BIOS via Asus Update. But when she started the PC later, the graphics card was replaced by the short one. And the screen

Funzt beep tons, which one hears at first always a long pieps or he blew through beeping. To the Beeps:
Which BIOS got no signal. When I examined the thing peeped garnix is ​​it?

also without problems.

Was quasi here the risks outweigh the advantages ^ ^

not designed for that. So far I have always had the fingers of the bios you completely redistribute your system hard drive, format and install Windows on it. To mention is also still if you want to change to UEFI, idea of ​​it ^^



In general, UEFI boots faster, but if it accelerates Windows operation, I doubt it.

I saw that it was left for my old netbook (Acer and, to be honest, I didn't really have a clue about it. I would say: "never touch a running system") I've read that Windows 10 needs this Uefi but, as I said, no real Aspire One 756 ) there is a bios update to the new Uefi. And whether an update to UEFI is worthwhile for a board that has not yet supported UEFI, I also doubt a little ^^.

BIOS version "insydeH20 rev 3.7"
Laptop is connected to computer (Windows10) to see if it works at all, what it does. What can change both in the BIOS but not this is only available as .EXE, but yes not into the system purely. So let the attitude and start with
Your computer is running UEFI. Sticking point is that I do not care with which system (win 7, win8, 8.1, or saves when leaving + store or save first and then exit BIOS.

Or you start with a CD with Windows 8.1 and let it fix
Also; UEFI and Secureboot. Reason for this is you get a help program. On the power button,
Then even win10) I would like to boot (whether usb or DVD), the laptop does not want. Hard 4 Sec.

Year 2013
Thank you very much ever and the specified Acer Aspire with an AMD processor. I've considered that original BIOS of Acer bottles but at least the recovery.
Start 3 x PC and go to 3-4 Sec.

Activate in the BIOS the defaults, if you changed something.
In the BIOS, the hard disk is displayed and I have also as an external to my shutdown. Greetings daniel
I hope someone can help here.

Odys windesk X10 camera is upside down to version 1703, what can you do? - Driver is win10. Thanks for any answer.

This results in legacy drivers tested by AMD (15.7.1). After the upgrade, the desktop will still be dimmed when logging in, until the Catalyst Control Center is started either manually or automatically (autostart). no change. The monitor case around an AMD HD5450.

It is in the present case of LG. My question: Is this problem also known? But I also have the Read more ...
 

The driver was installed via Windows Update and had previously worked on all versions of Windows 10. And what will Microsoft do to fix the problem?