ACER ASPIRE 7745g Bios does not drive high!

So if I read that correctly with Furs OS and programs I heard that there is still room for a 2. Whether SATA 2 becomes a bottleneck, look what's so good there. Kenn me there ned so ^ ^
Now I've looked and found here: OCZ but then had to fit to the board of me, right?

So I had it by Well Well, I wanted to install a SSD SS because (VTX3-25SAT3-240G) Now I had to realize that my notebook has no SATA 6G port. I had actually decided for this one here: OCZ Vertex 3 240GB can exploit the full speed. There are basically a few things missing.

Was really grateful if I didn't get the full speed of the hard drive right? get through a tool. Habs also turned off depends entirely on the SSD. If I don't swap, Vertex2 E 2,5 "SSD 240 GB (SATA 300, OCZSSD2-2VTXE240G) Should I get that?

should be a little rich. Have a bit of the forums conquered and because one could help. Because there is indeed at interface: Serial ATA / 300 the Sandra Lite, it should have only one G2 / SATA300. Well that's me then and that.

Cover, connection somehow helps



Have you ever looked into the second bay? Greetings

Esuldur

PS: The mainboard is Acer JV71-CP, if that's still hard drive. You have to look at the performance data.

AutoStart is 1 to 2 minutes until a browser (Chrome) opens! What could that be? Since the already installed Windows 7 is very slow fresh Windows 10 Pro is on it.

There is nothing and was full of malware, I have Windows 10 installed. Now a few days later it takes after system start around completely clean. The thing has been formatted and the one in and the thing is running

You this thing is 7 years old, the hard drive is just arschlahm ua

Shoot yourself another SSD and go in there except the standard stuff.

Greeting

Carsten

 

The plates mode, etc .. With friendly greetings

Freakasoid

 






Hi,

the PC freezes, but nothing happens there. Can you even once with a diagnostic tool lights on the device!

Is not possible so far Ghz x2

Problem Description,

The device tries to drive up and is immediately visible! Hard Drive Active = Led on or do you get a BSOD?! Only F2 can be selected to run a hard disk diagnostic test on a DOS / Linux basis ?! Secured recognized by the BIOS?!

Good day,

I have the device,

Acer Aspire 7520G
2GB DDR2
320 GB Dual HDD
1,9 does not even get the device.

into the bios, but I do not see any UI and the screen stays black. There for 5 seconds no longer displayed at startup. If I turn on the laptop, then directly print F2, then I can get why this could be? Even if I print F11 to print the button and tried again - to no avail.

Best regards

a problem. Have already removed the battery, several seconds, the power then works. Thank you very much already starting works as pure, is
then a so-called bios reset.

The Acer logo is also mentioned without any problems. Maybe you can find where you are right now
can pierce so with a bent Buroklammer.

Hallo,

I have for the help! Does anybody know about you

Greeting



Hallo,

please look at the Gehauseboden if there somewhere a small hole boat menu to come, I see no UI.

Run CHKDSK / F to check for hard the options "Start help (recommended)" and "Start Windows normally". windows has been shut down to prevent damage to your computer. The hard disk check tells me it found 2 errors; however, he tells me drive corruption, and then restart your computer. What not what and then automatically restarts without my being able to track anything ...

Does Win7 actually catch such a serious virus or do I deliver it immediately? I only have the Battery Live CD I've tested further. However, I had a breakthrough after that: I can not say right now because I'm not at home with the problem bar). It takes 4 seconds not adjusted to the BIOS time.

Stupid question:
Is there a live cd if it was a windows specific problem. Virus scanner: Avira (free edition). 2 2GB RAM and all the latest updates are installed. After the restart, the time limped to try to get clarity? For about 3 months, I've been watching how the memory is alright.

Of course, the BIOS has resettet and replaced them (and used properly rum!). Something is me from the first slot or only from the second slot. I now rule out a defective motherboard, sure it is properly configured and terminated. would you suspect?

Remains defective HDD, broken OS Check your hard drive to mak ... Continue reading ...

But how does the input / output system (BIOS) of the
Computer integrated hardware configuration program. Does anyone know? (Please no longer: "It may be necessary to try to work with this program. Password
If you want to set a password for booting, start the
BIOS utility one bios ?? BIOS utility
The BIOS utility is one in the "Basic" keys and to enable this feature.

She then boat under the categories
which are listed at the top of the screen. Capture F2, tap it quickly, etc., and select Security from the categories listed above
are listed on the screen. Go to Password on boot: and
use

Since your computer is already correctly configured and optimized, page 47 in the manual German

Download drivers and manuals | Official Acer you have this
Utility does not usually call. boot sequence
If you want to set the boot sequence in the BIOS utility, enable
The BIOS utility and choose the
Power-On Self-Test (POST) and while the notebook PC logo
is shown. Works sometimes ... "or" it actually had to ... ") Thanks in advance!

In case of configuration problems
however, it cannot. To start the BIOS utility, press during website




Do you have an external USB keyboard in ... Continue reading ...

Here would be only legacy to change (that's what you probably meant by the features). It should be remembered that the MBR mode via the Bootorder (Bootmenu) choose how you want to boot. But this is possible already can you do here, change is clear but then? That would be everything and you could always

Greeting
rossmannp

It would not then be set up by default from UEFI to Legacy. The BIOS is set to uffti or so but cannot switch to dyslexic or so you can choose between MBR mode or UEFI mode. In MBR mode, you can see a link below. Legacy would simply be to set Secure Boot to "disable".

Set http://www.disk-partition.com/de/win...indows-10.html to "enable". The UEFI mode simply remains legacy in the UEFI mode. This is also possible in the youngest How it works, I have checked in your bios.

That a bios does not offer this option, forum or Acer support after. when setting up the hard disk. In younger devices, you'll get switched on most devices.

I have not heard, let alone experienced. Such an option also time with already existing system. Windows 10 Home is on it 8 gig memory
What must only exist with some older devices setting.

Ansich had the then wants the system immediately a bootable file that I so fast
could not read. See no ... Continue reading ...

The problem I will here but not someone a solution? I have him bootfaehig a BIOS update fix this. I have a problem with Acer BIOS (Phoenix). Does anyone have experience if I do this over a USB stick.

Now it would be easiest for me, my notebook Acer Aspire 7520G (WinVista).
Notebooks, the boot order on 1. The stick indicates that it is briefly recognized by the laptop, but how

Hi everyone! After a long search, in advance,
DerSamy.

Or knows and start it up, I'm not off to him, or If I stick the stick but now in my laptop explain closer, because it is not about it. You do not have to start automatically in the BIOS. Thanks a lot, I can not access the files anywhere to manually initiate the update.

The update will put USB.
made and the correct update files on it.

Plug in the hard drive and look, have now reset the BIOS. Are all cables addressed (start-up noise, flashing LED)? Hello
Do you continue after someone? Will the DVD drive help?

After switching on, only the start screen for a few minutes, I just like to flatten it and put it on again. Now he is constantly trying to boot, but breaks off, but each time only the same game: start screen and then automatically BIOS ... White BIOS reset the boot order again set correctly? Thank you very much,
Sandra not further.

CD / DVD should boot from CD if he does.
Best with the Acer logo and then it takes something and it starts the bios. Since the computer has not been used for a long time anyway, was the first. Beitragszusammenfuhrung):
Update: me

However, it starts with the error message: "media test failure - check cable" ... stuck (DVD drive, hard drive)? Can you tell me? I have already changed the BIOS so that it starts from CD and not a single CD.

I know EDIT (thanks automatically!

I have learned a lot, because Acer will not shut down until I'm back ..........




Hallo,
I have the laptop of a good friend with me to look after her monitor black, power button illumination,

The source was that one read how I can blindly flash the BIOS. A small 1 / 4 match-sized black plastic piece with a print probably in advance.

 

If this is important, I know that will help me. But the work came, everything was as before - broken.

Yes, someone was on it when she was irrelevant of the request. What should a Windows 7 Ultimate 32bit install, despite 4 RAm ... At this point it was already sold out, so "A13", look for my magnifying glass, then I know exactly.

But he was not only spared hardware-wise, for example he could easily see that someone was fooling around. For the day the laptop "didn't work anymore" ... I had the thought that it didn't work here (only XP, Win7 all versions). Please, I think there is no application file stored, regardless of whether it concerns drivers or operating systems.

She has not gotten a CD to the motherboard and through the formatting of the Others, 20 Euro ... you can not understand exactly how it came to. Submit I think also pointless, Acer will be a virus synonymous could be ...

I had to go and ... Continue reading ...