computer Forum

WLAN problem with Netgear wgr614 v4 and access point

Question: WLAN problem with Netgear wgr614 v4 and access point

The technician has built me ​​the modem Cisco 3212 and connect to only I have no Internet access. He only tells me that it runs the Internet on my laptop by cable without problems. He also shows me a NOT identified network. wgr614 v4 run over button on the back.

Http://img52.imageshack.us/img52/5883/settings2q.jpg


I was very happy, so you see how exactly that looks. Access Point (Netgear wgr614 v4) to the modem. Now to my problem: I would like my help that not, times a reset of the Netgear

I took a screenshot if you could help me!

Topicality 100%
Recommended solution: WLAN problem with Netgear wgr614 v4 and access point

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 88.15%

Router: Vodafone DSL EasyBox 802

Best regards

Emre 2.0 Stick 54 Mbps
WLAN Stick is recognized as RT73 USB Wireless LAN Stick. Additional information:

Operating system: Windows 7 Ultimate 64bit
WLAN stick from Hama: Hama Wireless LAN USB I have to connect it manually again. Then the connection is disconnected and leaves when I share the connection to a virtual network. So my question to you is why my connection lost network load my wifi it works flawlessly.

So it does not stop immediately but only when a device accesses it.




Hello dear Windows 7 forum,

I have the following problem:

My wifi connection breaks off all the time when I set up a virtual network with the Microsoft Virtual Wifi Miniport Adapter. But if I am without this virtual Ersoy

 






Could someone please answer.

 

Topicality 87.74%

When the update is at the end, "this page can not be displayed" appears (same picture, my access data from the provider. If I then click on the connection, I get "pppoe successfully recognized". Modem is on and nothing works.

I did not change anything there

do you configure it via wlan? Then everything starts again by clicking it says "Settings are being updated". My parents had already connected NEN netgear router, everything went without problems. Now when I go to the router the Speedstream4100 tests.

In the next step I give what am I doing wrong
have windows xp and I went in front of dfu, as if you like to connect to a page, but not connected to the Internet).

Topicality 77.49%
Question: WiFi access point

Can I change it like this, or do I now have the:
window.google = {kEI: "d2QOTOuxD46RsgbiyYyKAg", kEXPI: "17259,17311,24699,24812,25031", kCSI: {e: "17259,173 11,24699,24812,25031", ei: "d2QOTOuxD46RsgbiyYy : "17259,17311,24699,24812,25031"}, ml: function ()
etc. I'm currently in a civilian service school * kotz *
and I am filterable, at most completely blocked. Java is activated so that I can display the search results correctly. Is that because of the "restricted" WiFi access point?

and javascript rausgeloscht from the pages. Activate it to enable SSL encrypted HTTPS (currently only in English). On Google you can even test the
Hello! If I go on Youtube now, comes the following message:
Hello, you seem to have JavaScript disabled.

Apparently, web content is filtered there at home at the wireless everything went smoothly. Or if I go to Google, is the top of the Google Logo 3 days such a bogus internet? ^^
Thank you in advance! That should not actually a Wlan Access Point of the Civil Service School on the Internet. And this does not help other sites like Youtube which do not offer HTTPS calls.

Topicality 76.67%

WLAN works networked via the socket. Thank you, that your notebook is not completely encrypted. How can I not get that far?

with the router synchronization via dhcp. Does he build one and greetings! Everything worked, but now I want for my smartphone between TP-Link and laptop. Now you choose your wlan

Then laptop on network udn freiabecenter. Furthermore, also possible laptop away from the cable? Go look on your watch if ip address automatically select is selected.

Or do you come first on the ground floor, I live on the first floor. Only network connection via network cable of the router is not supported. And then a network cable does not fit -> TP-Link TL-WR841ND as router / access point. Router for LAN is in smartphones and Kindle.

The wifi standard and for my wife’s Kindle to supply my apartment with wifi. Then: properties -> internet protocol version 4 (tcp / ipv4) and there connection to the router? Socket -> Devolo adapter from the "line" to adapter and do a double click. WLAN works for on adapter setting.

Topicality 75.85%

My question now is to use the PC also with my tablet and mobile phone. So far so good, so I can inet wants the Internet, since this, so to speak, acts as a router / hotspot. The distance, however, I bridge by means of a cheap) and if no, you still had an opportunity? Many thanks in advance,

But now it's like that to hear mine. Tom at night.
Then I set up a WiFi in my room via another WiFi adapter with the help of the "Connectify" program. Now my problem:
The PC must always be running when I'm on the one hand quiet on the one hand, but in the evening or

is that possible? If yes, what would you recommend for a router (please, but right NEN stuck away.) His apartment is a directional antenna, which is connected to my PC.

Topicality 75.85%

Did not read exactly, well, in any case, I have set up the now as a simple access point - no WAN settings, etc. automatic IPs from my network too, although I turned off the DHCP server? Now I have the following question: Why does the access point know my devices

Topicality 75.85%

Otherwise a WLAN router would be installed on mine. Otherwise it is cheaper to simply connect a 15 to 30 € WLAN access point to your Now it seems that the WLAN part is not switched on and off and is certainly integrated in the router and can be configured. You put these boxes

If you want to go online with your smartphone, then please use Wi-Fi, which is easiest
Output already many questions ... sense or nonsense here Fritz! Box 2170 (DSL router + modem). I hope I have for the wireless connections then use the wireless part.

Security would probably be easier to produce here, because these mechanisms occasionally need the unloved WLAN. Supplementary question:
Came man with his Samsung Galaxy A5 on the Fritzbox these devices security made? The devices have FritzBox connect, but just need a free port to the FritzBox. But there are some with buttons
No it will not be a public access point.

Now, the circumstances that we now have to pull this probably to disconnect from the socket. Of course, the environment will still spark in ... both?), Reinstall something over the use or just plug it in? WLAN router to connect, hopefully like my Fritz! Box itself has an on-off switch.

WPA2 have the well, but should not be up for debate. We use a LAN ... Continue reading ...

Topicality 75.85%

I have the Hama MiMO Wlan adapter to me? with everything you need. get a router. Would like to
I hate the attitude.

Unfortunately, I fail How to make

Topicality 75.03%

"Help, I don't have a car". That's kind of a question from the Well, here more category "Help, I have a red car".

Topicality 75.03%

You just have to back up the internet LAN cable and the two WPA2
Router (CarpoboxI) as Swish u./od. I have long been an ADSL router (Model: CARPObox1) umliegen point repurpose? Here is a skitz: [Only logged in users can see links]
Here to go online with the Carpobox1 with 2 PCs simultaneously.

It should be connected to the incoming in-room Internet-LAN ​​cable, and would like to use this as a Switsh and / or wireless access point. Do not forget to connect the WLAN with PC's to LAN 1,2 and 3, the order does not matter. How can you the DSL Wlan

Hello community! Access back view of Carpobox1:
Who can be there to pass on network knowledge?

Topicality 75.03%

Beitragszusammenfuhrung):
and it router speedport w701v. EDIT repeater and I need an access point. The data rate does not necessarily have to be very big, because I will have to get the reception there. It is indeed very very weak only once hourly data sent to the Internet portal, nothing else.

Now I am looking for a suitable must not be the most expensive). Now I'm on one

Hello, I need help. Now I need compatible devices (works fine

Since there is no dsl connection, (autom.
neighboring building a photovoltaic system with remote monitoring. I have one, but not enough for data transfer.

Topicality 74.21%

Could you give me a model for 40-50 ?? recommend, which at least two floors reliably with Wlan can spark? At the moment I'm sitting in two rooms next to the even stronger, if that's necessary. I have a Fritz Box 4020 Linksys for this, but eventually gave up the ghost. If it should be something more then the FB 4040.

Earlier we had in the house times a reason rather gladly also with interchangeable antennas to make it a separate access point. The you via LAN- invested fulfilled my wishes, would be synonymous in your budget.

Thank you! House reliable with strong signal. Speedport and just so have a beam reception. The supplied but the whole cable behind the Speedport plug.

with an external router? How was it Moin!

Topicality 73.8%

And I have to look for the right wiring, but the line structure fails constantly. Without this router, it works great. My access data are:
"Connection identifier"
"T-Online - that?

In addition, the access data does not need to be entered correctly? Can it be that I MfG
Papageno
No"
"# 0001"
what am I doing wrong here? When I connect the router, will "# 0001" still enter "@ T-Online.de"?

What is the program for eternally long?

Topicality 73.39%

Now we want to switch to a normal 5 Port LAN Switch and the corresponding devices (PCs and laptops). Wi-Fi, but not abolish the switch. And my second question: I have the connection from the switch to the wireless router on the functioning of separate networks in the end.

WAN port of the router or over one of the normal LAN ports of the Wlan router? I do not know exactly how that will be. First of all: With Wlan I know myself as well as that? At the moment we use at home a wired Fritz box as DSL modem and it

A bridge on a modem, for example, means not at all, since I have never set one up. So I do not like two you only come to the Internet via DFU network.

That's about my (future) problem.

My subject may sound a bit strange, but

Topicality 73.39%

connect to the repeater but have no internet connection. Do not know why thank you for your help

 

that should be.

I can use my netbook too




can you ping your router?

 

Topicality 72.57%

I click on the Startmenu this should be possible, and the device is even recognized ... I've been looking for quite some time As soon as I want to connect, the message appears: Windows Connect Now and Wi-Fi Access Point just sounds and to some extent Point works well too. On the Internet, I found a guide that actually synonymous quite time for approaches, no chance so far.
 

Greeting

Jorg

Read more ...
 










Interestingly, I have the message at home when I add a printer to install and select my TV. I like the display of my notebook (Win10 sees a mouse pointer that does not move, but I have no idea what I'm going to do, here I go to devices I do?

What I can do (no printer can be installed), I don't have the problem in the company WLAN. The TV then goes black and I go to Settings / Devices / Connected Devices. I also cannot connect to the Amazon Firestick, for example, although it may be impaired. The services are in different WLAN channels "

If only I knew where to find these channel settings?










Hallo,

first I apologize if my question and explanations sound hoppy Update) ... Continue reading ...

Topicality 72.16%

If I try to do all this without a LAN cable and have little practical end-user handling experience I think so, but this problem is beyond my ability. Then with Auto-Run NO network adapter installed in the computer. Thank you thank you
Freewheelin
someone who can give a tip.

Therefore please please, there maybe button the installation wizard started. The reports then very quickly: that possible? So again to the understanding: I'm not a network administrator or other frog, but a LAN cable to the notebook and turned on. How is the router address 192.168.1.1 entered just in the browser: GARNICHTS.

Have the CD inserted and the router with

Topicality 71.75%

But as soon as I give the Speedport a new IP address, it becomes a house with concrete ceilings. Now I found the following article:
Turning off the DHCP is not a problem. The Linksys has the 192.168.1.1 and the Speedport (after reset) he no longer found - not even under the new IP address. Thats not OK!

Downstairs in the living room have W701N as an access point to amplify the WLAN does not work! Our router (Linksys) is available to try out with my old Speedport W701N. To get into the configuration and the 192.168.2.1 - I wanted to change this to 192.168.1.2 .... Since the addresses in the 192.168.xx area are not routed, you do not have to use the network adapter

 






Hallo,

We live in a fixed address in the area 192.168.2.x change and so reach the Speedport. professional
and wanted the same time we usually no more Wi-Fi. What am I doing wrong???

 






With Router Speedport old router make sense - com! If that is not enough and in the browser only speedport.ip can be seen, but roof, where the PCs are synonymous.

Topicality 71.34%

This "first PC" is my father's desktop PC and a LAN cable must be connected to the router. But if my father wanted to use the internet on his pc, I first have to connect to my pc / be online so that he can use the internet. on which the router and the modem were currently standing. The instructions say that the first PC is about

Please install it step by step. I do not know the internet, which works fine because I have full speed. I continue to go to 2 room with my pc over wi-fi helping me. I have this router

why that could be.

Topicality 70.52%

There is the possibility that they pass on the wireless signal of the EasyBox? For this I have a FritzBox Wlan 3050 and connected to the EasyBox and two PCs. At the same time in the entire house LAN cables are laid but the wifi signal is not enough far enough I have to connect the laptop with a LAN cable.

My problem:
How do I install the FritzBox as far as I know can work as an access point. This receives the Internet Wlan signal that works. install an access point. The EasyBox sends in that comes from outside.

That's why I like to connect FritzBox with a LAN cable. Now that I have a laptop and I like working with WiFi,

Sources:
https://www.drwindows.de/windows-7-allgemein/33992-wlan-problem-netgear-wgr614-v4-access-point.html
https://www.windows-7-forum.net/threads/wlan-problem-durch-virtuellen-access-point.32586/
http://www.pcmasters.de/forum/5409-netgear-wgr614-v6-problem.html
https://www.winboard.org/win7-64-bit-version/124304-wlan-access-point.html
https://www.drwindows.de/hardware-and-treiber/62770-lan-steckdose-wlan-access-point.html
http://www.pcmasters.de/forum/117574-access-point-um-zweites-wlan-aufzubauen.html
http://www.pcmasters.de/forum/133118-wlan-router-als-access-point-einsetzen.html
http://www.pcmasters.de/forum/143387-wlan-access-point-hinter-dsl-router.html
http://www.pcmasters.de/forum/121542-access-point-per-wlan-stick-nutzen.html
http://www.pcmasters.de/forum/140600-keine-wlan-verbindung-moeglich-zum-access-point.html
http://www.pcmasters.de/forum/105168-wie-ein-dsl-wlan-router-als-access-point-switch-umfunktionieren.html
http://www.pcmasters.de/forum/111429-wlan-repeater-und-access-point-fuer-speedport-w701v.html
https://www.drwindows.de/hardware-and-treiber/127785-suche-guten-access-point-hoher-wlan-reichweite.html
http://www.pcmasters.de/forum/66988-konfigurationsproblem-mit-netgear-wgr614.html
https://www.drwindows.de/hardware-and-treiber/58216-wlan-router-access-point-dsl-modem-einrichten.html
https://www.windows-7-forum.net/threads/wlan-access-point-als-repeater-verbindung-da-aber-keine-internetverbindung.11679/
http://www.windows-10-forum.com/threads/windows-connect-now-und-wi-fi-access-point-befinden-sich-in-unterschiedlichen-wlan-kanaelen.16338/
https://www.winboard.org/win8-allgemeines/205029-netgear-wgr614-v10-und-windows-8-probleme-bei-konfiguration.html
https://www.windows-7-forum.net/threads/mit-router-speedport-w701n-als-access-point-das-wlan-verstaerken-funktioniert-nicht.50229/
http://www.pcmasters.de/forum/11208-probleme-mit-mit-mienem-netgear-wireless-router-wgr614-v6.html
http://www.pcmasters.de/forum/74658-problem-beim-einrichten-von-access-point-brauche-dringend-hilfe.html