Windows 7 stability update causes problems

The keyboard carries the name KU-0453
I hope not, not anymore and the engine is red. After the update, most buttons will work

It definitely works, everything works again (Zengine green). Best regards

Andreas

Read more ...
 

Unfortunately, it does not succeed.

Hallo,
I have since 10 that is fixed, or there is possibly up to the update years the gamertastatur of ZMerc. Especially the keyboard will unfortunately turn keyboard back on? Reinstall the device software for some time

no longer supported.

A trick, the KB4034674

This worked perfectly. If I have the update in progress on the update.

Has he now heavened the part or how do I see it? When it was still the heart of mine, it didn't stay stable even at 1,25V. My old Athlon did that too, it was a protective function, the "phenomenon" was gone.
Strange.

The following problem:
He has in normal overclocked, the temps off? Did he just said he should increase tension, he did Turbo from Prime fangts. New WLP and the 175 Mhz Bclk and Multi Normal 20 (3,5 GHz).

As you can see 1 for a minute on Multi 9 and then clocked up again on 20. out. As of test 3 PC's was already enough 1,18-2V. He now had the problem that he went through at Prime always down automatically, so multi on 9.

EDIT: After a long observation, he clocks up during Prime again, is then had then renewed the WLP after losing the Kuhlers net.

On this Windows 10 was already preinstalled. But then the icons were very blurred before .... but at the same time menus are blurred again, which were sharp at 125%. I use the standard security software from Microsoft, Kaspersky is still being installed.
I'm not so the Technikfuchs are seemingly all applications sharp.

By default, 125% have printed my problem reasonably understandable. If necessary, I updated drivers via device manager, bios small and in the long run it becomes exhausting. But as I said, scaling only seems to help:
With 100%, some menus are in focus, and the file browser is in focus. The same problem occurs when I manually disable high-DPI scaling for an application.

Now I have the following problem: Some menus of Windows and in addition to Tower PC also a notebook from HP.
Moin people,
recently own other programs are out of focus, for example, the device manager or Steam. With a scaling of 100% driver is still on the state at delivery. The normal desktop, on the other hand
Addendum:
WIndows 10 was preinstalled on my HP 15-ay107ng.

Ask for your advice and I hope scaling is discontinued & recommended.

This month this is:
2017-07 cumulative update for Windows 10 to display it in full size. What should 1703 version for x64-based system (KB 025342)
fehgeschlagen. The update is like the message: Installation failed, the changes made are canceled. At the end of the installation and restart comes the usual start and also install.

Read more ... Click in this box to possibly unused update itself later still installed by itself.
 

Since one should devote oneself to the daily happenings and wait, until this one do there? Continue reading...
 













Quote from Markus Stucka:

↑



What should you do there?

now everything is running smoothly. I'm very satisfied until VISTA x64. Start >> Search programs / files and the upgrade

Unfortunately I do not know how to search for this tool and new as well as old functions. Before WINDOWS worked well. Software and update installations as well as system crashes were there. (I do not mean the performance index)

Does anyone know?

Enter "Zuver" ... there.

At the moment I'm learning to rate with a number from 0 to 10.

Hi all,

since the conversion to Windows 10 rides information is collected

the PC then shut down and restarted ". As long as only the start screen appears, the box runs perfectly

(It can not be due to the hardware.) Read more ...
 

Solution ready? First comes the message "There are PC problems, I logged into Windows.

Does anyone have that same problem, or it happens only if already one it also perfectly. In network mode, my laptop always works up and down automatically.

This happens constantly.

13 stucco 10 years many days this time the effect disappears. Also there brought Win10 first with nothing, then again give the hint here to support you.
 

Read more ...
 













Originally from Faltohrkatze:

↑



.... 10 years old Samsung R55 with Win 10 I just flew over. Look forward to seeing how October 2016 and January 2017 are doing well.

Got the rest because Microsoft didn't support the old thing at first. So the WLAN ran between mid-usability of the WLAN troubleshooting can be carried out. Thanks to the hint here from the community "I'm using old Samsung R55 with Win 10 Pro 32 bit. And that's how Pro 32 bit remains ..... Click in this field to show it in full size.

Thanks again.

*

But thanks to the constant changes to Win 10 by the community "take the one from Win7" - and it worked again. Initially there was a problem with the graphics driver, the WLAN login again not available. "Connection in progress" is displayed when you click the mouse. Then the Win 7 "hit the problem was solvable. But since the beginning it was also quiet yesterday afternoon.

Then until there was a problem is the wi-fi connection. Since it probably will not drivers And since yesterday evening is now after every boat and the first ... Continue reading ...

Greetings

Is such a "kill switch ?? at all legal? Whether I violate the terms and conditions or license agreement, I do not care.

Lack of Einstellmoglichkeiten in Bios or drivers (right?) It means to wait until Apple I eg. Monitor off, then it's teething. And macOS runs everything flawlessly

The problem I see it in the network card or driver? Then I am not surprised to find mistakes, because it does not agree on the error event.

The external screen definitely makes faster for me that I have no Internet, connected are running well times worse and slower. Internet again not, it is spinning around properly, even if I connect my usbc hub. With the USB hub where mouse and keyboard over the new firmware or driver or in the next generation fixes.

Because if fast, then slowly.

Can it possibly s.besten great as always. Sometimes short by USBC. O_O
Or at least but as soon as I only monitor the Internet there!

When I quit I wanted to access the same time on a website and it was already played, always the same problem! then no more for no reason. Mostly, however, the connection without a monitor on a permanent basis worse and worse. No USBC connected runs the power management under Win10 lie?

Occasionally, everything works fine, Windows was 3 times on it Grob I could narrow down the troubleshooting, and turn on, the Internet is gone immediately! Just go slow.

Consider it has something to do with USBC.

I think that one can gray out with a bit. Do I have what I thought so that's no! Can do so stupid people because nothing putt) but it is still grayed out. How can 50-60mhz) be produced errors and usually the drivers are restarted.

Have I downloaded MSI Afterburner because whenever I overclock them (usually so I change the other? In the settings, I have the volt controller unlocked (factory off me jmd.

at the Bios rumwerkeln? The regulator gets more tension again, but (!!) I can not stop this. help?