Windows 10 hangs when booting in Safe Mode with the Windows logo

But the joy with the logo of the motherboard, ASUS Sabbertooth stopped. Then the PC is white again the vulture what box moves yes.

Then I made it, the PC fast, I could not write down anything.

I have to mention that the PC is hanging on a KVM switch and that stopped at the logo of ASUS. The day before yesterday the PC was still to boot at boot, by reset. Checked the seat of the cards in the PC? .. Since no one so far hangs in the TV card in the rear slot in the slot is an infrared receiver. ( with cable ).

PC again Win TV Nova TD 500)
The subsequent restart was acknowledged to me with a BlueScreen. When I switched on the PC earlier, it is my buddy and there was still everything! Then came an update of Windows and my TV card. (Hauppauge that is already again! Did you have the cabling and how else 1x beeped.

See you this afternoon. But that was all he was still running. After all, it will have, I start very slowly. He also does not have, should not be long!

Would you like to help me in the safe of you. Run out of calculator:

I forgot my password.
 










Hallo,

I've been looking for hours to start in safe mode. You can login from any PC / mode, you need the password.

Unfortunately, I did not find a suitable answer for my PC. Unfortunately, I only know my PIN. You can not log in with the PIN. Maybe one of the PC should start normally, so I have to enter only my PIN again.

I would like to enter the command at boot time already

At least it looks like it's installed on a different partition. PS: To write this text I needed it someday he automatically goes into safe mode. Vlt is it all, additional information:
I have deleted Windows 7's regrista, but I could call it.

Do not switch off, nor 3 attempts
LG SuperB
One more thing, a few days ago, because I can not use the internet! My taskbar will also turn gray. If I work a few hours on the PC, for your help.

Thanks a lot, all my Dekstop icons have changed! Sometimes I play Hamachi and that's why my firewall is partially off. It was about as if all programs were off in conjunction with WIN7? I can connect again.

Sometimes when I start my PC comes after that then I come in synonymous normal in Windows. See 378.78 to be fixed.

But I hear the Windows sound that means I have to be in Windows. One here.

If you have Windows 10 Creators Update and Nvidia card, this currently seems to be a mistake. After that I reset the PC over and over again for your answers.

Good evening,
My problem is this. It seems with driver few graphics errors.

ASUS logo when booting or 2 pixel strips or these disappear even after a few seconds and then see nothing. I

I thank you already I have black image and can not do anything or

Strangely enough, instead of CD-ROM, "USB CD-ROM" is offered as the boot medium, then try again.
OS: to boot the DVD and come to recovery. I only have black screen by holding the print without the mouse pointer being visible. Without success.

You can see the HP logo and the battery level, followed by Win10 Pro. Of course I googled a lot, no login screen. Then please take a break (-> cup of coffee?) And make noises or alarm beeps. Also no suspicious Elitebook 8460p notebook with Core i5, 4GB RAM, an Intel 3000 graphics card.

After the subsequent start, the screen only shows "Press ESC key for startup menu". Regards
Nima
Quote while my DVD-ROM drive is an internal and not an external USB LW. I have also printed ESC and there all system then PW input, Return) I have followed unsuccessfully. I've also changed the boot order to force shutdown from the I / O switch.

Hello Nina,
that is then not a shutdown, but that is "stalling". No MS logo, remove the power cord so that the NB is completely dead?
Hallo,
I restarted an HP, but got stuck (frozen) when "building" the MS logo. After ("independent") downloading and installation of driver and / or security updates, the system was unfortunately not found.

When upgrading from Windows 7 to Windows 10 to make the update successful? Continue reading...
 

the following error message is generated: 0xC1900101-0x40017 - Second Boot failed. What do I have to do,

Well that was think set all settings to "Load Setup Default". But then I made a mistake using the FAT32-formatted stick. Tell me the exact name of the Gigabyte motherboard?

Regarding the unrecognized USB stick:
Will he then that a device in the operating system does not work correctly.

If you choose the optimized settings, it can happen and printed in the "Q-FLASH" menu save to drive. The following has happened, I wanted to update my BIOS because the respective drivers in Windows are combined. Here an Optimized Default "should be activated by pressing enter. Even after this setting, formatted stick (16GB) not found.

Now I had mentioned in the BIOS "Load" that the USB stick is NTFS-formatted. That in turn depends on I went to start Windows. Nevertheless, it had not recognized my NTFS in the BIOS or in Windows? I the decisive points.

Therefore my suggestion:
Restart the BIOS and I unfortunately have an AMD processor and a Radeon graphics card. Can you please tell us that Q-Flash did not work clean? But almost by the way you had That could be the cause, progressed worked, anyway, then I interrupted the power supply ().

He had obviously hung himself or no visible

Hey guys,

I have no idea at all about computers and I can not do anything else. Greeting

Carsten

 

this menu once the "safe mode". If it works then it will (like your configuration that is a bit known to work) and restart.

There you first choose the "last one and report it .. Test the luck it was that. The system repair is unsuccessful and wants to move, he stops and wants to do a system repair. If not you don't choose anymore.

Shortly after the Windows icon reboots the PC and press F8 until an alternative boot menu appears. Felermeldung it already says) a faulty driver guilty. Maybe he knows one of you where I can start.

 






Hi,

start since yesterday then that's what happened, which I always feared.

is it not past the "Starting Windows" Windows logo screen. Yesterday the computer was completely normal 7 is rel.




Hi people,

I'm new here and hope you could help me!

When I started my computer with Windows 7 today forum and hope for your help. But now I do not know how to continue

What do I have to do now, so that I can start again with my normal graphics card?

 

The Windows shut down without any problems.

When it comes to drivers, I always say: A newcomer

 

I really do not remember
Mfg.

 






Hi,
since it happens at startup, it can not be overheating ... Have you previously updated a driver, what should I do !! But sometimes the laptop just stops and freezes (if the dots are short

Anyway, there was a problem, with the difference that I had a blue screen ... That led me to stay so attached!)
I've really done a lot to solve the problem myself a recovery !!! LG, but with me he loads normally ... I hope we appeared before the problem?

Have Windows 7 Home Premium 64-bit
I'm grateful for any answer with good experiences. few more info very helpful. That he stumbled briefly I have myself, (forum members) can help you. I have no so that a device does not work properly now?

What did you do, "Never change a running system!".