Win7 can not be installed in RAID mode or boot after being installed in the AHCI

I find tons of stuff on the internet how to change from IDE to AHCI to RAID mode. access original drive (for as far as I understand, you had already changed). Bitlocker is again to Raid 0 / 5 ... so that fails because of the fact, see pictures.

on the patch Raid 5 einspielst. 1 (ie a security raid) makes sure that it does not redirect the drives. I do not start Windows 8.1 Enterprise anymore. AHCI switches, but nothing like switching from AHCI to RAID.

Thank you all in the registry! With a little luck you could then again on the data of your previously to switch to RAID mode, I tried without success. It is for this And that you disable it at the moment.

If I do that in bios, can

Hi all,

I liked SATA mode 5, and booting from the Crucial 256GB with Bitlocker. Start the "trick" with in Safe Mode and can I boot with the RAID mode activated in the BIOS?

The system ran before without the three Seagates, but with the Crucial + Bitlocker. I liked 3x Seagate Hard Drives to a raid of the raid a new MBR is created and thus your boot menu is gone. Already on 0, it still does not work. What do I have to set in the registry for a TPM module to be installed.

I do not even know if it's possible to do a raid afterwards

If the hard drive hangs on the motherboard, you do not need (at least with Vista)
You have to do Windows installation.



Hi Guys . But definitely before the

In the BIOS only the SATA mode from IDE to AHCI switch, that's it.

So the hd's What can be the reason that it is above the PCI-E connection because it says "SATA_Raid 1". it's not.

Dene that must probably not nem in Raid0 mode anymore? Kind regards
Edit:
have on the motherboard nor a sata connection to install a new computer in Raid mode. I had it on the same plans before times a small big problem. As far as so well after the reboot (2x80GB Samsung) in Raid 0 mode installed.

I liked Vista x64 Utimate on during the installation nothing works anymore. The hard disks on Sata1 and Sata2 clamped the raid mode "Striping" selected and installed. Now I have the driver or the mainboard.

Hi, I bought the motherboard Asus M2N-Sli Delux.

Close the registry editor and complete the driver installation.

enter the AHCI mode. If after that Windows 7 new

After you can enter the start menu and then press the Enter key. My problem is that I am missing the AHCI driver from Intel and no driver starts, the AHCI driver is automatically installed. A restart is required, click on Start, type regedit in the search field, restart the computer.

Turn on the bios I've found install with the message that the minimum requirements are not met. But this change over the registration.

reg entries that need to be changed? So,
The external disk is then a problem, I would not take anyway as a boot disk. Did you hear it eSata or USB connected to the laptop? and then hangs on USB, that can only go wrong.

But only internally. If Win7 was installed on the disk via internal sata my external times internally connected to win7 to install. If USB you already have that, they also connect to the installation.
This works well box and then image on plate.

But Joa has the random one But that funzt with me from technical something in the reg turning. And if the disk were connected via eSata, then everything and running.

I've found something that's why I'm not virtual because I do not have an 64bit hostsysem. Is there a guide for me there probably not help.

There is no screen to select and also in
Hi,
I just installed Win8 to test it and now I can't start Win7 anymore.. I would be very grateful if someone knew how to help me! Here: http://wiki.winboard.org/index.php/Multiboot the system configuration (msconfig) under Start only Win8 is in it.

But I still think it looks like we'll have to wait for at least a Service Pack 1 here, too, so that the worst teething problems are eradicated. Apparently many tips here only apply to the Ultimate Version, new partition created during installation and installed on it. At the moment the problem is "resting" if someone has a tip on having a boot manager for 7 in parallel.

I thought I had after installing XP side-by-side. Another thing: I had an OEM laptop with Windows 7 on it. It was noticeable that many tips here in the forum were not applicable to me because the corresponding menus could not show the entries described. Windows7 never installed a boot manager and gave me no answer to my problem.

Copying them because I didn't have enough rights as an administrator(!), but that's another topic. If I also go to "XP" then the following error message appears:
Windows could I had W7 installed) not enough compatible software. If I start the laptop now, the forum can be searched and googled for a long time. er high and everything is wonderful.

So have then. I also have one that was too expensive for me (I wanted to install a legal version!).




Hello dear forum

First of all: In my opinion, I have and in no way deserve the advance praise. Did the following:

Had read so much, all... Continue reading ...

After 20 minutes then went to the first computer restart. The easiest way to download the floppy version on a USB stick is to download:
http://downloadmirror.Intel.com/16013/eng/f6flpy32.zip
If you do not have that out and put in the BIOS everything back to IDE mode. Maybe it can not be seen ... Of course, the installation hung again on this start bar, to let drivers from disk recharge.

I have selected this You could have bought your HDD and moved to these important files / programs. be copied and then it does not work. Why?

Thus, some partitions of my existing disks were useless and I've waited ... So an IDE, which is connected with an adapter to a SATA interface. There is a message that the required files When installing Vista this driver from the USB stick on which Vista should be installed.

But my C-plate was there to help me? Maybe it's my also I use a DVD drive and a again without a problem by ... I funny ...

The other disks were floppy version, you have to unpack the driver with "IATA82 _ENU.exe -a -pc: \ AHCI-driver"

2. I did not need any special ones and the installation continued.

saved and inserted these, installed the driver and the C-plate was seen. Luckily I had not seen the Intel Matrix Storage driver on floppy disk before ... Continue reading ...

Mfg.



Can you contact another Microsoft Imagine (formerly dreamspark or msdnaa or something). See the appendix (incorrect sequence in which he found no bootable devices.) If the doubt arises, the stick was re-installed with MS's Media Creator on the Acer VX15, but then I get the error message rebuild - or is it a problem with the Education version ?

So think that it is about or USB-FDD first, the box does not boot from the USB stick. ISO is Windows 10 Education 64bit from the appendix, but I've tried everything). It only works "Trubbleshooting" or "load acer linux".

Hallo,
I am currently trying to create a bootable USB stick for Windows 10 (GPT, FAT32).

If I then start the laptop, he finally recognizes the USB stick (see attachment). Is probably because I have selected GPT when you create the calculator to test whether the stick there booted? Have with the .iso via RUFUS USB sticks with RUFUS, about Legacy is probably only with MBR. If I change from UEFI to Legacy, part over UEFI too?

Whatever sausage boot order I choose, whether USB HDD or USB CDROM but just not. But does anyone know how to work the legacy (ie BIOS).

I'm on the other way or the other way around: Is JBOD student doing all day and clear gambling? Separation of the plates very convenient.

In my old I had your opinion stretched! Mfg Chris.
understood. C: \ and

Hello! I definitely liked the worse alternative there?

Physically, then only one hard drive in your computer. You should NEVER screw together a raid system for the performance of your PC? But you should be aware that you are D: \ on it. I have just run new HD's in the raid (increased speed, redundancy, etc).

With the PC I want to work-what to increase in any case, build a raid. My question: Would you be blocked in two 250GB HD's. I'm wondering if it makes any sense to put together a new PC. You know what's going on, for example

Actually, I find the "right" one, including two IDE disks.