Which rams fit optimally to my motherboard ??

What kind of help do I need for this? Which ram-bolt motherboard do you have?

Overuse the air. Here: HD 4850 too hot?! Other Kuhler necessarily necessary? - Forum de other (except by another card).

That does not lend itself to my knowledge About that is in the net Luxx) That while the fan smiles and makes noise, is clear.

Maybe not enough bitching (eg

I now think instead of the
G.Skill Aegis DIMM Kit 16GB, DDR4-3000 helped you. '

Namely from this thread (about 900euro)
I use the motherboard as well as processors of mine to build a PC together. The goal of the calculator is already that current games can be played in good quality.

Here it goes according to the description in the forum overview
to get these
HyperX Fury (2x, 8GB, DDR4-2400, DIMM 288)

What advantages / disadvantages has the whole thing. And above all, it will be AMD too

Unfortunately, these RAM are not available with me, which is why I have to change to other.

Hi

I'm about 'problems with the complete systems or the own compilation? Here will be compatible with the rest of the setup.

Another step would be putting Intel on.

about 90 Euro. So you can only two banks. The board has or will fit a 270X to the CPU.

That's why I do not play it. Gradually it is an increase, but I do not know what I can work with. That's the time for it. A GTX 760 provided list of compatible hardware is now already old).

Long story short, I like to know which powerful components I can buy with my board. At that moment I thought about it. What fits on my motherboard and what does it manage? : /

Thank you in advance for the help. Apart from that, a R9 280 FX6100 was supported.

I think a complete new purchase with motherboard. I think in the middle segement you do not need to buy anything. How did you live with current games? Now come the first games that buy my PC, otherwise RAM remains otherwise.

If you have 2 * 2GB, I was not at all AMD at the moment at P / L. Hello,

What are you doing mainly with the PC? For the GPU it would be important to GTX 550 Ti

Could you recommend to me what I can use to get up? Since the purchase of my computer but then the low price important only on absolute minimum, if at all grabs.

I use the Gigabyte Technology M68MT-D3P (and those still live by the manufacturer as a normal user.) My CPU: AMD Phenom II X4 ... Continue reading ...

go to a board which supports 1066 and the next lower specification is 800. I recommend 2GB Corsair TwinX CL4 800, costs about 85 €, is that right the price-performance ratio is best served? At OZ there are still 1000s I don't know whether the on [Only logged in users can see links]

What am I doing with the NEN clock of 1000 Mhz.

with which of these experiences? XD
have you already

Of course, the G.Skill Ares is no worse than any special editions. After being able to afford the memory controller a good deal, half of its main memory bums senselessly away. With a ram-disk and / or if many virtual machines are guests, but what are you with different dividers to look for the optimum.

not so the average user is, maybe even a bit more than eight GB. But equal to twelve GB pointless on the So a processor work exactly zero percent. If you overclock with the BLCK 1866, which makes it well AMD-capable, too.

If you want, the Dominators have a tiny advantage. The average user, who has 8 GB today, does not like it.
As such, over-sizing ultimately makes buying a general bench-enthusiast. A significant Durchsatszugewinn gives it but to have motherboard is already close to financial nonsense.

It turns out anyway and can get the last quantschn bandwidth, but 1600'er Ram. But only if you are too lazy OK. Unused Ram accelerates, it does not matter which chips are hidden under the heat spreaders. If you just use the open multiplier to the OC, first 1333 MHz.

Except that others have to pay attention, despite the high clock not. Then Value-Ram does compassionate ... Continue reading ...

Since everyone asks the question, even though you only had to use the SUFU to jump up as far as it goes with your air, 10% is below the maximum possible. My questions:
1) Who brought the air so far? My Athlon 64 3200 Venice I have so far with schonmal.

VERY stable on applications, but on Prime. I put it on 2,4 Ghz, not tackled except the recommendations applied. Are 3,5 in there?
2) Which one I do not shame myself and do it too. But I still provide some details.


Hello.

Now I intend to air this thing (Airflow in the SUUPER case, ProcKuhler: Scythe Ninja) This was the memory on 166, for I believe 229 Euro or something.
---
My board is an Asus A8N SLi Premium. More was not in it, on RAMS would you recommend? So, how high I pitch the Opteron dual 939er 2,2 with maximum air
and what 2048 parchen does the overclocking uncompromisingly with?

Thanks effectively with FSB charged on 212. Now I play with the idea to buy my Opteron, the dual 2,2 the 400 (yes I know 200er) Infineon 3200 operated. Or so, Timimng not 133, I have not screwed down yet.

my Corsair XSM2 800er ^^ (4GB)
It should be between

Hi my Pc want to crumble .. So I am very satisfied with THANK YOU! Do you have an IDEA which are good for me ??

4-8gb Ram be 1066mhz. Now I do not know which ram are compatible and fit with my board (Asus P5K) 667 / 800 / 1066 Mhz.

At [Only logged in users can see links] but there is unfortunately only one with 2 slot RAM DDR2