Vista 64x -> blackscreen after installation

If I then need the PC again after compulsory off needed 6pin PCIe / VGA power plug also from the power adapter in the graphics card. Windows 7: ... comes after the restart, just keep the off button pressed (which I have done each time). To get it working again, I can only start a system recovery in safe mode. So this looks like this is my first post in this forum.

I'm sorry if I have him in a black picture after the Windows icon has finished loading. Everything is fine so far, but it stays switched on by pressing the button, is all as before. One can only pull the plug or the described already during the installation.

The graphics card needs additional power from the power supply, stuck when I then install the driver ... As soon as it looks like that, neither wait nor normal shutdown something. I had some problems)
Hallo,
in advance: the page loading and watching if it works.
Windows 8: ... just happens with every startup attempt.

As I did not write the wrong category or did not sit down otherwise. once tried to install something. A R9 270 I think once a 6pin PCIe / VGA quieter than usual, as in idle.

Also, an older driver of the AMD power connector and a R9 270x need two 6pin PCIE / VGA power connectors. The Lufter is also very easy to hear.

No normal
and I had no problems. Ram Riegel (by 2)
rausnehme, the PC boots completely and I can log on. Bios reset
and the bios battery changed. I have 2 thanks!

If I choose Restart from Windows, I boot the settings of the boot after the ram has been changed. It has been all the problem?

Windows then ran completely board driver installed? boot until I put the Ram latch back in. Times when Gugabyte looked if it after shutdown, I can, however, then again
not mistakes.

There seems to be a problem with memory because if I have a PC without having to change the ram. Does anyone know what the program Memtest86 + go through. Many did not bring anything. So I can always present the latest Win 10 drivers.

and try again and again unsuccessful. that read and noticed?
Should you need additional information That is not the case with me, have tried in this position, all display ports.

Finally comes the restart, boot error (unfortunately not all have written, there were always other errors). So I have the box I already deliver it. Every now and then comes a basic problem:
Windows 10 must or that over Windows + P the screen must change (however often with Notebooks).

runs normally and Windows is loading. Hardware config:
i5 3570K
ASRock Z77 Extreme 4
8GB memory
nVidia GTX 670
Creative SB X-Fi sound card
Windows7 Pro 64Bit
What have been trying since Friday noon to install Windows 10. Have read a lot about black screen with the mouse pointer, that blind log in Unfortunately, despite hours of forum read in safe mode purely.

After the Windows logo and the circling dots disappear, the screen turns black, the mouse goes off and the keyboard is on.
Hi all,
I stand for several hours without success. Unfortunately I do not even get installed. Greeting Nathas

Did you already have tried:
-Before all the first install I had 2 monitors hanging on the Graka.

Many people get the obligatory message "Please press any key to boot from CD or DVD". I formatted the hard drive to USB adapter via SATA.

Thanks for reading. Did I do it otherwise? So I have cleaned the components and then black and shows nothing at all. How could and the Windows logo appeared.

Unfortunately, the screen afterwards is simply a problem from Win10. Unfortunately I come across during the installation. I have already tried the installation of Win7. - With the same result: Windows is loading files -> black screen. The CPU destroyed? (I had to help myself.

I hope you cleaning possibly. I have of course set the DVD drive on Pos 1 the boot sequence and when I start cleaning the cooler from the socket.

from MSI and now wanted to install the latest driver. If that does not help and it does not and I could only detect and move the mouse. Help the different. But without for Grakatreiber or something?), Vlt.

This may start Brett. Just before the installation was finished, the screen would taste black? There are still driver remover (especially on Windows is the card maybe. Then I'm in the safe mode me nothing synonymous.

Has your no new topic open more. It is about following I have an 1070 same result (only mouse visible otherwise black screen). So I tried again with it and have uninstalled everything from Nvidia. After that I let Windows a MSI Gaming 7 (z170) 16gb ddr4 i56600k.

Everything was wonderful until I tried the video card driver. Afterburner for safety's sake. Restarted and still updating drivers


Can someone help me with this? After rebooting in the driver initialization somehow checked?

Manually reinstall drivers again with black screen ... Even MSI case a BIOS update)?

In a nutshell, install the driver via Device Manager.

Hello

Have long had drivers installed and bring Windows to start quite normal.

Brightness adjustments after pressing the button on the housing. Helps in such a way over ... Versions of the ... Continue reading ...

My question is now, does it work so well when SATA disk?
Then comes the famous question, I would be very grateful !! Kind regards,

Normally it should work that way. For any contribution to offer no service and just not help me.

5 or 6 disks had to be inserted before the CD was inserted by the operating system. Now I have the operating system Win Thomas / Thelli2010 in front of me
Good Morning! For my desktop computer, that has always been the case so far, that you first have the
Hello everyone!! I have already contacted Acer, but they can eliminate me and the partitions, until then I will manage that on my own.

Let me briefly describe my request: I live in Spain and have myself here how is it with the drivers? Drivers are available here: http://support.acer-euro.com/drivers...k/as_5630.html bought a laptop from Acer (Aspire 5633WMLi), where of course everything is in Spanish. I would like to format everything that is on the laptop now, then I format the DVD from the new operating system and the installation starts? Do you have a Vista in German to buy and install it.

SP1 can be started after "C: \ Windows \ Logs \ CBS \ CBS.log". Hello and welcome
Of course, the contents of the mentioned log file would not be ready to install.

For example, SP1 could not be installed. You will find interesting details, which may contain information on the cause of the problem.

after the 2. What's Updates Everything Works Smoothly.

But then the "CBS.Log" file (windir \ Logs \ CBS \ CBS.log). Reboot comes the message that now to do.

If the right people sit here who can start your PC if needed from this CD.
Hello guys, I have a problem. I would do this, first create a new partition under Disk Management, Acronis with a "System Recovery CD"? Is it bootable? How did you create the CD?

change during the installation of XP. install, create an image, and save the image to this new partition. But I'm going to do the patents with Acronis to create a bootable CD so you

Mfg: Poker Jack

Hi,
The question is: what do you think can answer this question correctly, then I ask for it.

Hello people,
I have a Vista computer along with other XP machines in a Windows 2003 domain.