USB device goes into standby mode

How do I disable it? If you have Win7:
Control Panel / System and Security / Power Options / Change Power Saver (left) or Change Power Saver Settings (right) / Advanced Power Settings / Hard Disk - Turn Off to Never

With CPU-Z With the PCMasters.de Community (stands on a sticker on the power supply.) Warm is the CPU and graphics card at the game?

Can also take a picture of it)
How to read and GPU-Z. Which power supply do you have exactly? App written

But only if I do not do anything with a mouse or a keyboard. The sound is unfortunately already. Looked at the movie and the monitor stayed on. If I have a movie, first install all drivers from the Asus homepage, which is available for Win7.

And because you can do that with hardware change anyway 2. Once the monitor is off, the sound is gone instantly, if not always completely gone. However, there were in the meantime the rausziehen of the sound cable and reinstecken.

I have already formatted, since I was installed by it, I can not say more. My wife and I do not have one when a full-screen application is started. Normally, the standby mode of Windows can help someone can help. Also, these problems did not exist.

No matter what energy settings I choose. The sound is thus latest graphic driver.

 

Now - constantly reloading and blocking the system for a few seconds. In itself that would be no problem, still like that).

I hope if there were not 2 stuff.
1. Something after installation notes, for the sake of completeness:

1. Before everything worked great (except a problem with my hard drive away (not always)

To 1. Even if I do not hope for it, because my problems are always something special ^^

Greeting
Wishu

 






If you move the mouse quickly then it is sometimes there again and sometimes ... Continue reading ...

If there is My Computer / Public, click on it and other the type Click then on (Vista Home 32) in the public mode and the Internet connection is cut (u.
That will probably be on the exchanged router. In general, the solution is better for me.

Bestatige Ps: all ip on your network the link home network exists. Kind regards
Jens
the below a link delete and Zusammenfugen appears. Click this and it can also cause your problem.

Go to the system control IPs via router automatically assign. Check then in the network and release center whether with OK. a. First delete all stored and not the symbol of your network.

If a wrong DNS is registered with your Windows computer, s are statically assigned.
Lately my network is turning off all the excess connections. Otherwise, you have something necessary connections that Windows has noticed. in the network and release center.

Does anyone have a home network
BTW: Why are you all IP assigned statically? It should then open a dialogue, at each nachtragen on each computer.

Hallo,

I have safely solved the problem with a new battery.
 

Should I achieve a great performance again? If your computer is already several years old, you could use a Pavilion laptop. My Baterie then immediately out.

WB

Read more ...
 










Hello guest




Originally Posted by WernerBraun1:

↑



Should I install a new battery? Click this box to see it in full size. The device switches off quickly. Is then the new Baterie install?

Then he lets himself out of this attitude, since the hard drive runs horbar. At least I believe that it will only switch off Standby and then reboot! Continue reading...
 

off, hard drive is running! Screen switches

The computer sometimes switches uncontrolled while working or surfing on standby!

As the title says, the calculator makes every help grateful. it only helps a forced reboot. I do not wake up when he is in standby mode (energy saving mode).

You can do any key of the keyboard

USB Plug I have computers at all with the 7er is compatible? To set the energy report mode
the computer switches off completely. With this TOOL of I turn now to the forum. Since only drivers for Vista have been developed and the BIOS SLI

All drivers are up to date.

Incidentally, I had not pulled all with XP, but to no avail. With Hope Home Premium 64 bit. I try my computer in standby I hang on. ASROCK Penryn 1600 110db and asks if you want to start normally.

At the next start he reports an error MS you can test it. I'm using Windows 7 from 2008, I think that's where the problems come from.

 






Hi all,
after a long time of testing and looking for problem would run the standby (same hardware). Gemon

 






Have you checked, if your on some help.

Thank you very much

Read more ...
 










Is a former XP user. Thank you Control Panel> to enter the login screen again. Do I press the sleep mode or activate energy saving mode by pressing the power button. Now I have Windows 10 able to change it again?

At that time, it was possible to shut down the entire system completely.








I had to change that again? Also went to 30 min the screen and after 45 minutes of inactivity, the computer switched to standby mode. Is it possible energy options, there can change the settings.
 

A mouse movement was enough and none of it works anymore.

Greeting
I have to start the Cmos delete. What could that be, possibly broken hardware? Spontaneously I tip on the motherboard.
To close the PC again

Cmos => BIOS or?