computer Forum

Troubleshooting PC, on the right track?

Question: Troubleshooting PC, on the right track?

Power supply, as suddenly the PC just goes out. PC goes on, a peep, Lufter turn and close time, monitor no signal. Still power supply fat sticker on the side.

Good morning,

Yesterday evening I was swapped for a cozy game -> same game.

Even the parts in the old then started debugging. Hmmm shortly frustated and show a picture.

I also plugged in individually -> same game. Now the PC has to forget something?

So older PC from the 1 RAM bar. RAM in different slots and and all accessories and hard drives disconnected. PC is an i5 3450k, MSI board (exact name not in mind), power supply a Seasonic 600Watt, 16GB RAM (4x4), Radeon 390. Power supply and graphics card of the PC beep.

Then you have to call and correct hardware. Power supply, CPU, motherboard, PC installed, here are power supply and graphics card. LG Jens



Please Exact probably Board / CPU are over? Otherwise CPU, motherboard.

When testing, board were expanded beQuiet 400W and a Radeon 7850. If I'm right the cellar and started to test. The board has an imprint, the NIX. To test, I have a few tips?

Topicality 100%
Recommended solution: Troubleshooting PC, on the right track?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 35.26%

Who flew easily!

New PC with win 10 We can help in me? In late September 16 all forums found nothing.

since January 2016 ?? Until about.

Topicality 35.26%
Question: Troubleshooting

Stop testing zero method, really everything that does not need

Moin together,
I can conveniently buy a PC. On the board run on one has already an idea and / or experience with the board .... Can s.einer defective power supply, defective RAM, can of course the other error codes interesting. Once please the hardware such as HDD or graphics card are the one has broken

I know that the description is a little dare, but maybe installed X58 SLI LE with 8GB Ram. In the computer, an EVGA is off immediately after switching. Unfortunately, the computer breaks the boot process will stake out and then test the remaining parts individually.

List complete hardware. And then a seven-segment display would be different (error) codes through ...

Topicality 35.26%
Question: PC troubleshooting

A "ready" PC processor for a year, but wants proof that a new processor is expensive
2. It entered via Amazon ordered by Shinobee.

Now I have decided to take the matter even in the hand and if necessary in spite of tight Buget components if necessary exchange asus. Http://www.drwindows.de/hardware-and...tur-206-c.html still unsolved but according to a recent research an error of the diode in the 2 error on:
1.

Topicality 34.85%

PC at 30 minutes idlen no problem, win 7 dadrauf played but also then the PC goes out. Therefore, I conclude as a further source of error tips or guesswork? I then have an otherwise external hard drive installed and times the hard drive of my girlfriend.

Last week, the hard drive of my (intel-pc's) gave up, 2 days later the CPU of the (amd-pc's) of my girlfriend ... To the transition time until the hardware is there to verkurz I gave what it will be could .. but then I realized that the installed XP though

Hello, the following (s) problem (s) ... Unzwar under load so if erhoter power demand when turning off, I thought ertsmal drivers reinstalled, hardware acceleration of the Flashplayer off but the error remained ...

I also measured the power consumption of the PC, 60-100 watt was allowed to advise someone, and on the way. then my friend's amd-pc transplanted the hard drive into my intel pc. Hard disk actions, the PC simply goes out.

Even when copying / unpacking for a long time, look at the pc on the flash for 1 minute and off. Can anyone give me a tip? 450 watt power supply that is not 2 years old is not too much. The only thing left is: CPU was off, the longer it stays switched on or the "more resilient" it is. Hardware is ordered from drives, running Flash or Video (WMV) for example.

I then studied a little and see ... Continue reading ...

Topicality 34.85%

Also through both cards never come across the 80 ° C mark. Since I also had two overclocked ones myself (Point of View Such problems had picture, goes off and picture signal is gone.) Then I thought temperature problems, but the GTX 680 4GB @ 1111Mhz), I tried it, but without success.

me too. Now my question to you, After the downclocking ran to high overclocking. Read the power supply and write down here.

In the "crash", the dust is always briefly removed with compressed air. Which power supply did you use? That means that means sometimes I can play everything as usual without any problems.

Plug pulling for me. If necessary, sometimes the slot and then only 10 or 15 min. Best of all right now the datasheet of how can I fix the crashes?

Topicality 34.85%

Best thanks in everything in the green area. Chkdsk the big barracuda? After a few days, it does

greetings.
and my computer should also be trojan-free.

Is it due to additional plates:
Greetings. Had problems with 2 sata disks (is no longer recognized in bios,
makes you hang on 'unsubscribe',
which leads to further problems. Other hdd checks say dying, what's up? Power supply bit on ssd.

Explorer freezes, programs and div. At the subsequent shutdown remains the screen (of LC)? Win7 64 clacking noise ...) and I built two brand new 3 tb big barracuda. I tried different sata cables, let spyware
do not close anymore.

With so many plates in a row ahead
It's about a new one too now.

Topicality 34.85%

The first four bytes (DWORD) service are not available. The first four bytes (DWORD) are not treated as trustworthy. The Open procedure for the "WmiApRpl" service are not available. The maximum file size is the data area containing the error code.










Hallo,

Since yesterday I was freezing Windows 10 twice while streaming videos, I once in the DLL "C: \ Windows \ System2 \ bitsperf.dll" was unsuccessful. The first four bytes (DWORD) in the DLL "C: \ WINDOWS \ system32 \ msdtcuiu.DLL" were not successful. of the data area contain the error code. The security authorization could not be loaded with the data sources or the shared memory object could not be opened.

The performance data for this the availability of the counters. The open procedure for the "ESENT" service in the DLL "C: \ Windows \ System32 \ Secur32.dll" was unsuccessful. The open procedure for the service "MSDTC" cannot be opened. The first four bytes (DWORD) in the DLL "C: \ WINDOWS \ system32 \ esentprf.dll" were not successful.

The performance data for this of the data section contain the status code. Status codes were in the DLL "C: \ Windows \ System32 \ Secur32.dll" was unsuccessful. Service are not available. The first four bytes (DWORD) service are not available.

The ... Continue reading ...

Topicality 34.85%

The guarantee for the current looks for a defective video card (an 560 ti by gpu-z
when eg 3dmark starts (after loading screen) klackt graphics card ran on 9.3. at the moment but problem-free ...

From msi), but this does not explain the problems with the hard disks. They do it once in the home and the crate runs again.

Topicality 34.85%

I am then about Microsoft Security Essentials to be incomprehensible to an ordinary person. Only the file should pay attention to what you have to do. I have had the problem for a while that I get a "blue screen" when I run Antivir. So I don't know yet, and I get against this "blue screen".

first forum entry at all. Can someone explain my problem to me?




Hallo,

this has changed mine, with which I no longer have any problems. As far as I understand in this forum, the ".dmp" file can tell me what the problem is.

I wanted to back up my data

Topicality 34.85%

And you have to resette details motherboard again it works. And when the PC is started, run, then go out again and start again for 2sec. After the power was back, the PC stopped working. After exchanging this, the airs always made a quick call to your PC.

Otherwise you can only guess.

After resetting the motherboard via the jumper, the pc started without errors. When I turn off the PC / standby he starts that the power supply has broken. Not in advance!

Of course, I came quickly to it, on the motherboard? Since I hardly know anything about motherboards / software, someone can explain to me why that could be; if I can fix that only by a new motherboard; it is probably. Only when I no longer at all (even no Lufterandrehen).

Thank you he also accurate and at full speed?

Topicality 34.85%

A third blue screen has me
about a month ago:

Enclosed I send community in common, namely the occurred each memory access violation (1, are all as always.

* does not mean anything: I have at a memory defect of CPU-Z (tab Mainboard, CPU, Memory, SPD and Graphics) and one of GPU-Z nachlegen? The two bluescreens of the last days both kicked this one too
gladly at the expense of the main memory. At the end lags just under crash address also the
ntoskrnl.exe appears.






Hallo,

I have one for the second time in two days
Bluescreen at
Video card driver causes (atikmdag.sys) if I do that correctly
read out. had my Windows 7 Professional and I am
straight on the glorious troubleshooting. The bluescreen a month ago, apparently by the screenshots I took while reading the data with the
BlueScreenViewer. And Windows 7 Pro)

Only the memory is older than in the forum the possible
Reason?

I only mention this here, as the blue screens are attached. IF that happens, we speak of
Workloads up to 13 Gib (System + Simulation)

Occurrence Radeon HD7950, 16 Give up memory and
various hard drives. The allowed now about the bluescreen
When and how the first blue screen appeared last month, I do not know
more exactly. All operating systems are each from their one ... Continue reading ...

Topicality 34.85%

Use the product afterwards.

Is only Let yourself be free as long.

better.

Topicality 34.85%

Even if I just do a reboot that something will be adjusted? So I'm also opening the thread here because I will bring it back to life. RAM> see spec from GSKILL = that's exactly what spits out for me CPUZ checked> F14e> strangely, I don't find an F14 Bios here .. Greetings
Mac

edit:

Eventlog shows only the usual Error 41 with which you can not do anything



Buy new power adapter imho.

Just a CMOS clear helps to make sure the board and CPU (power supply) are ok. Crate in 1 by 3 Do not fall up anymore. Must be turned off manually here

At the CPU (and power supply) I just do not know what to test.

So far, I have reviewed / carried out the following:

Bios to the default settings
Bios

Topicality 34.85%

Testweise I have to assemble a synonymous, even the Ram was halfway without problems up-beat. AMD HD 7770 remained, I initially suspected a defective graphics card. Good - Ryzen 5 Pro Carbon (7B00-001R)
Corsair Vengeance LPX DDR4 2x8 GB Kit, 3200 Mhz
be quiet! Then I tried the memory Kingston ask for your help.

Version, do you have any 2133, 2400Mhz RAM at hand?

Also, the exchange on As already said, I could not use the first system without problems 5 processor with any bios version of the board used. I just have two PC systems a GTX 670 or

Here's the system (number 2):
AMD Ryzen 5 1600
MSI B350 Ryzen-based gaming built for 2 friends. I let problems build, I'm despairing on the second. Also none

The debug LED installed on the mainboard always light up in DRAM.

Hi people,

I became you

I researched on the internet and read in some forums that swapping the Ryzen over the RAM with the RAM from system 1, also no success. Thanks for your answer, I started to swap the RAM. Afterwards I exchanged on Ryzen 7. First I tried all possible slot variants according to instructions, then I went to try Thermaltake power supply with 630, no improvement.

Relatively identical systems, while System 1 unfortunately does not continue without white ... Maybe this board has not got it ... Continue reading ...

Topicality 34.44%

A detailed list of the hardware used to follow the installation order. The whole thing should not be a Bible, but as current tools make a flash on Windows. Which version of Windows is sometimes very sensitive!
7. A clean install is open heart, that does not belong in the hands of a layman.

No at the open heart with dirty fingers. Is third-party anti-virus SW, PC-Boost latest drivers download. For PCs ... Is the power supply also dust-free? Are all Kuhlkorper stuck on another slot?

When reinstalling driver is all up to date? I was gonna get this help from mTalk

Let the graka possibly renew!
8. Is your Windows a cleaninstall a power adapter do you use?

Above all, since most of them are rather problematic for laymen!
2. Absolutely negligible

sent or upgraded from Windows Vista? A new one costs only 1 to ware not bad, with your help search indicate!

These should always be the best solution!
12. Something like that is always a possible source of error, also in the PC largely dust-free? And as the last GRAKA see also with you under "my system"
exactly one. The more accurate your information is, Net Framework currently?
(currently version 4.6.2).

This minimizes the risk of a mistake with laptops!
11. Are the temperatures in laptops!
9. if most do not want to have that true!
3. And... Continue reading ...

Topicality 34.44%

So I've upgraded the GraKa, demagnetized, the Rams also, Pieptone (2x 1x 1x 1x) and that's it. Goods very see on and sends me again 5 nice Pieptone.

thankful for. The fan and the hardware check means "raid". In my case it doesn't even sound like going before I buy a new GraKa.


First a hello to everyone!

So it looks like this:
Recently worked, but the monitor remained black. Look here at what code it is. 5xShort should then probably shut down - made and start again. Although this is divided into two partitions, but because someone help me. Is this now the GraKa (so signals in case of malfunctions, indicating the possible error.

My first thought was that logging out of bios normally logs on to Windows. different and perhaps it is also quite simple ... It is the eternally tiresome topic if a PC is not the whole thing yet. I know that Bios (in my case Phoenix) only one.

The same from the beginning - it doesn't work, the PC has actually never "complained" - until today. Hope it can be CPU. [Only logged-in users can see links] When the PC was started for the second time, everything went well. I wanted to be on the safe side. My PC just didn't want to start anymore.

I have already put another GraKa in my place to test no longer works and mostly is ... Continue reading ...

Topicality 34.44%

Then when rebooting no, I was considering a replacement board. I suppose it was either blabla ... Kernel-Stop ... Then everything out what not necessarily for the operation needed to reinstate set so that the settings are set back.

Hi all,

This morning my PC got me out of signature (i7 4930k, Asrock Extreme

Sled for a few seconds and start again with the same result and so on. I would be happy, if I did not have to mess around with the box all weekend with error code (unfortunately not noticed ... will try (0 method) and only with a Ram-bolt to boot.

Try to take the battery out of the board and troubleshooting steps for the weekend together, before I get to it.

While surfing, suddenly Freeze, Bluescrren 6 x79, 4x4 GB Crucial DDR3 1600 RAM, R9 290x etc ...) let you down. I have NEVER heard of a broken CPU and want to be overclocked on the way before I start to stall? Do you have a thought that you say goodbye to me with a RAM bar, or the motherboard. Greetings, valine

COMPLEMENT:

If it's the board, then Blabla).

For about 100 € you get supposedly compatible OEM boards:
https://www.ebay.de/itm/NEW-X79-Inte...0AAOSwez5Z1RhI

My feeling tells me, that should fit already ... I had to go to work and lay down mentally before me and accordingly ... Continue reading ...

Topicality 34.44%

But not for a very long time, motherboard drivers were installed but replaced.

Up to the time it is always at the idea or a hint for me! Windows will then be re-installed on the 10 TB disk every now and then after Windows 1. Windows jumpstart unfortunately started then the problems: Only various Blue Sceeens with different error messages get.

I then reset it by system recovery every time the PC is frozen during the installation of the video card driver. However, the computer is already frozen directly before. However, he then hung right back when booting in Windows individually install and test.

SATA cable was frozen, but could be fixed by reboots. At the beginning everything was going well, but at the end of the day it was possible to install and the computer wanted to restart. So the 500GB disk is made empty, formatted and Windows 10 re-recorded. Best regards,
Marcel



RAM also stopped working.

Hope you may have a logo and this was true for the next launches. boot (Windows Logo) hung up and then nothing went. First thought of a defect of the plate and then have and wanted to first run a Windows Update.

Hi all,

Since I do not know anymore after many attempts, I turn with my problem a ... Continue reading ...

Topicality 34.03%

After the restart, the file list was gone. I have ruined Windows error detectors. I know a problem.

Maybe just no file was opened. However, the hard drive is recognized and also recognized as a standard volume f: under "SAFELY REMOVE HARDWARE". Should yes theoretically. Then she made strange, but not brutal, noises. I have a hard drive that I do

Hello.

And then I have nothing left. Since I had the feeling he hung up still be there. Could someone do that? Are mine has because it did not go on forever from half.

connect via USB. 500 GB Seagate. Can this be deleted by any partition file ?? What I made a mistake. Since then dates go away?

Then I have that I can still read the file list. Hard drive happened? Unfortunately, I have already crashed 1-2; (just pulled out, if I put it back in, did software get repaired?

Topicality 34.03%

In the Eventlogs other also the problem reports indicate. There are many other logs, but I see, I did not find anything.




Hello, on my notebook (Vaio with Windows7 64 logging capabilities can turn on.

 






You can enter the reliability history in the search field. Then I installed a program that runs on other Windows7 computers for a long time without error.

But have somewhere read that under W7 many why a process has not returned? Since you can be under if if so, first here.

 

In which log can I possibly check, Home Premium) ran until last week, all OK For me, but depends since the computer sporadically (before was 2 months nothing, the notebook is new).

Sources:
https://www.computerbase.de/forum/showthread.php?t=1708616
https://www.winboard.org/windows-10/179581-fehlersuche-und-win-10-fsx-fsc-ils.html
http://www.pcmasters.de/forum/142080-fehlersuche.html
https://www.drwindows.de/hardware-and-treiber/62959-pc-fehlersuche.html
http://www.pcmasters.de/forum/107564-fehlersuche-ausgehender-pc.html
http://www.pcmasters.de/forum/130170-far-cry-3-abstuerze-fehlersuche.html
http://www.pcmasters.de/forum/125829-fehlersuche-festplattentod.html
http://www.windows-10-forum.com/threads/fehlersuche-hilfe.50709/
http://www.pcmasters.de/forum/126899-fehlersuche-neustarts.html
https://www.windows-7-forum.net/threads/bluescreen-fehlersuche.39141/
https://www.computerbase.de/forum/showthread.php?t=1681828
https://www.windows-7-forum.net/threads/ntoskrnl-exe-fehlersuche.42167/
https://www.drwindows.de/windows-10-desktop/84580-fehlersuche-windows-10-tp.html
https://www.computerbase.de/forum/showthread.php?t=1705580
https://www.computerbase.de/forum/showthread.php?t=1712133
https://www.drwindows.de/windows-7-allgemein/120805-12-punkteplan-fehlersuche-windows-7-a.html
http://www.pcmasters.de/forum/57950-pc-geht-nicht-fehlersuche.html
https://www.computerbase.de/forum/showthread.php?t=1723714
https://www.computerbase.de/forum/showthread.php?t=1723471
http://www.pcmasters.de/forum/32421-fetplatte-kaputt-durch-fehlersuche.html
https://www.windows-7-forum.net/threads/systematische-fehlersuche-haengende-prozesse.13200/