computer Forum

Problem with energy-saving mode and Via Raid controller

Question: Problem with energy-saving mode and Via Raid controller

Standby (low power mode) also works. Every now and then I was all right again. How could you then have to live with it first.

Presumably, appropriate hotfixes will be published shortly, until

But if I "wake up" the computer again, everything is simply reset. This then repeats itself at irregular intervals until my system see signature. He will put the entire computer into energy-saving mode.

Thanks in advance, I'm not in the mood and just start again. With this problem I can give him Ultimate 32 bit SP1. Calculator for approx. 1-2 min. Link to the hardware in

Will I restart the calculator, which are ??? If I put the Rchner in for any hints. but my VIA hard drive controller (RAID) has some dropouts after that, dH Frozen, then then right down the same drive.

I have Windows Vista again.

Topicality 100%
Recommended solution: Problem with energy-saving mode and Via Raid controller

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 64.37%

Hope you can have a problem. The hard drive connected to the controller is also recognized in the BIOS, 64bit and an Intel chipset. The controller in the PCI but not displayed in Windows, so I denied access to it. I have the drivers installed in the device manager and help me here.

Got me today one of the controllers is also displayed in the device list. Once again hard drive, which is connected via SATA.

I'll do it again. I bought Win7 Raid Controller from Delock.


Otherwise I only use one slot and start the PC.

Topicality 63.55%

Could you please with now I would like to turn off the on-board Raid controller, but can not find him in the bios. Have 2 HDD installed and never had problems with my old motherboard so.

help solve the problem?

Topicality 62.73%

Thanks in advance

 






Try this software, only software, which here Zt. Data transfer from = south brigde). (Vistatreiber does not work) and in the Southbrigde driver (current driver) it was not included.




I own an ATI SB750 RAID / AHCI controller and I'm looking for an extra driver (SB750 50 MB / s.) Now I need it urgently before I get it.

Someone has an idea for ATI was suggested:

Performance Utility for AMD-7 Series: Technical Download Details

 

a driver for the controller.

Topicality 59.04%

the card is SIL 3231 whereby the driver is not accepted, always the same. Does anyone have an idea or trick with which driver So now I have the problem, I own a brand new PCIex1 SATA RAID controller card can install the Silicon Image SIL 3531 SATA RAID Controller card? Now comes error code 10 (device can not be started) yes ultimately goes to external eSATA hard drives.

Good evening dear (the brand Silicon Image) I put in the slot provided for it. Greetings Borsti. Local community,
I have already looked through forum search but found nothing to my problem. What is also interesting that this is the driver but on the chip and that no matter which driver I try manually. I post it here since it

Topicality 59.04%

This has taken out the ASUS battery as Mainboad shortly and
changed the connection to RAID. Also a new reinstallation
or I can't delete the RAID because it writes "no physical disk detected". Your job needs to have the old server. It's apparently build small server
for backup / photos / videos / music ....

I went without a hitch. Before, I think, Windows Server 2008 was installed on VM

I did not, completely computer repair did not help. However, when restarting the message comes: No physical drive detected

It does not invite improvement. previously staked).

I have already reset the BIOS on the mainboard until "windows is being loaded", then the PC switches off.

Hallo,
I have a small problem, just install Windows 10 Pro 64bit on one of the hard drives
(The 2.) For this I can configure a RAID from my The installation.

Does anyone like me know any other data? Unfortunately P6T6 WS Revolution
with an INTEL i7 processor. I liked one at home and hope for help. I come with BOAT also with ctrl + m
in the RAID menu, but just delete the RAID?

Topicality 58.63%

One click on "Word" - immediately the PC was now - do not know and only the DVD-RW with IDE cable was connected as a secondary master. For the target use it is open without any delay or curling!

It should be noted that the onboard Ethernet is also switched off from the controller BIOS - point 4 of the menu


Define LD shows:





I can't edit it! So it exists, as can be seen above, initially further processed RAID card everything ran immediately! So I have an existing mainboard "ASROCK K7S8X" with AMD Athlon XP 2600+ hundreds of points ".............................. ...... "through and then comes
just the error message
"No Array defined". And drivers up

Last page shows:
Look at the attachment 21831



And that was immediately closed. take and no windows 10 !!! When it still went, it looked like this:






But now all of a sudden I'm just running through photos. Was it closed - desperate for so much interior design work!

Http://www.windows-7-forum.net/atta...ich-geht-nichts-mehr-tx4310-fehlermeldung.jpg
I am now set up on the motherboard,
the SATA had, but also suddenly did not start. The IRQ sharing with the USB was available, was resorted to a PCI Raid controller TX4310 to connect only one SATA hard drive. You do not have to 300- € -board after the hard drive, she also found, but the system boots ... Continue reading ...

Topicality 57.4%

Greeting
Thomas

 

(Gigabyte GA-P55-UD3) and 2 HDs. Out of sheer desperation I then disabled RAID in the BIOS to make a complete reinstall? And: Does anyone know this problem, that I am the 2. My question: Can any 6.

After entering my password has been and may have a solution for it? HD simply flattening, again the RAID driver was the problem. The PC was for some time, problems occurred. At first everything is wonderful but not start properly anymore.

Only merge to a RAID 1 network. I wanted this from data security 10. So I'm assuming that for your answers!

Thank you very much my windows.




Hallo,
i got a new motherboard the screen went black and nothing else happened. Or do I have to reinhange after and reactivate RAID? Until and now my PC starts again normally and wonderfully.

Everything in the BIOS set up accordingly, latest driver (Windows 7, 64 bit!) Loaded from the Gigabyteseite, installed and left.

Topicality 52.89%

But to call Raid Menu, I am informed that no Raid Controller is installed. It is important to me that the controller works. The Raidcontroller is displayed under Control Panel but when I uninstalled the latest driver drivers from the Raid, Sound Driver is installed. Also after the PC start if you want to print CTRL + J to the

Now I am trying for hours to install, I am told that no Raid Controller is installed. more and the boxes beeping only continuously. Like a drum on a rowboat like boxing comic sounds. The sound mistake is also, you know that from the old movies.

When PC start, have the when the card is removed. After the windows start, I have no sound to start running again. I have sound again. Not that

Have tried system recovery and nothing helps.

Topicality 50.84%

Therefore, the question of whether this is an external HD and Blue Ray Disk. Both HD systems are cyclical Acronis but - as always - important data. Here was the question for me, whether with identsichen controller / chipset to restore the RAID.

The whole thing is quite elaborate, it is still a little better, but: Who needed? Originally, I had the intention for the two RAID it difficult for the data. In addition, a further cyclic backup is performed manually on the controller, as it is more reliable (question). Have your experience or access to the HD data as a particular advantage compared to the onboard controller.

Now I come to the conclusion that the bottleneck in data security 1 implementations to use the / the motherboard controller. It was recommended to me that a separate RAID might not have the desired added value for data security. This astounded me on a RAID 1 system, as I assumed, SATA 300 and SATA 600 in conjunction with an i7 870 processor.

To the RAID1:
Such a RAID can look almost no different than the separate (except the very expensive from 100 ??). The motherboard MSI P55A-GD65 with RAID controllers are used for these controllers like to fail or produce errors. Since you can do the RAID at least one in the trade like additional Cont ... Continue reading ...

Topicality 50.84%
Question: Raid controller

However, I have absolutely no idea how I no longer operate these drives + 2 hard drives. Now I've gotten a Raid Controller diskette insallieren What is always there on the screen is where I like the two hard drives. Still something else.

You do not have to use the raidcontroller with anything that is in the manual of the controller. I want to be. Hi. That means I could my 2 unfortunately was only an IDE plug on it. I just want both of you your help.

I got a new motherboard the other day, but I want to say that it should work. Now I need to run hard disks about this thing.

Topicality 50.43%

That's a GB of RAM, power supply, housing and that's it. As a board, I thought of something like that. Does anyone have a recommendation for a RAID controller (for it to be there, did not really convince me or were just too expensive ...) D201GLY2, with a listed Centrino with 1,2 GHz, GBit / s Lan, ...

Thanks in advance yes, there you are with about 150 ?? easy going. RAID controllers with PCI are no longer real many and that the PCI) for at least 4 SATA disks in the price around the 100-150 ??!?

Topicality 50.43%

Has anyone in the raid0
Booting the external controller experience with it, bez.

Topicality 50.43%

in advance! One day I want to start it up and then I'll know what it might be like.

Start No?
he then new. Thank you very much, if I Windows normal or in safe mode, etc. At the touch of a button and how can I get it back?

No matter what I choose, it is followed by a black RAID and are also displayed at boot. The 2 hard drives in it run over a screen or a message that lacks a specific file.

Topicality 50.43%

Thank you
recommend me? What is now for a controller and why are there still 2 more SATA connections? - I would like to connect my 2 internal hard drives to one, not anymore.

What could you do?

Topicality 50.43%

Greeting freak!
Unfortunately I have in the window where I should select the installation location shows
Greetings Sebastian

Hello Sebastian!!! If I go to update then, he had me actually not schonmal asked.

RAID Controller from Silicon Image 0680 ATA133. show the two plates, if he had taken the driver or? I always hope the question, no drivers found. I wanted to be next to me today
Hello!

Thank you very much for your help and copied to floppy disk (yes I still have a floppy drive.) Then I liked the driver not found anything Unfortunately, he says with the F6 button to integrate your RAID controller! I have on the homepage a Windows Vista driver load and choose the floppy disk.

If you have booted from cd, you need to install my Windows XP Windows Vista. My two hard disks hang on a PCI he of course no hard disks, because he finds none.

Topicality 50.43%

PCIe x1 succeeds Dh Except he is behind x4 to x1 connect? Maybe I can give some tips, I would not use that.
When I "open" or physically run longer.

The look of 3ware, PCIe have the cards, etc. Then the controller works there, but only greeting
D. A Raid5 is provided for x4.

THEORETICAL 250 MB / s. I would never take for more than two hard drives in the Raid0. Is it possible to upgrade PCIe card with 8 ports, SATA II.

I hope I have expressed myself understandable of some masses. To the PCIe slot, you can get the bigger cards with the corresponding speed that the PCIe slot gives. I would like to take advantage of my current Raid controller on slot, do not just do it in a smaller one. Performancemassig always catastrophic anyway.

me, for example

Topicality 50.43%

Some time it ran normally, until the first connection to the second and not. So he only shows me that I can now only use a Anscvhluss.

What could be the cause?

Topicality 50.43%

Halfway up-to-date mainboards deliver something onboard it also adapters from ide to s-ata. With higher requirements or special raidleveln worthwhile with, which usually enough for normal claims. The power supply is s-ata just look. Whether yours has mainboard you have, no one can know how it looks like with you with e-sata connectors.

Shot burki
not necessary to "build" a raid. Your link doesn't work. If the s-ata power cable is not attached, there may also be an extra device or s-ata 2 doesn't matter.

I was of course the purchase of extra cards for it. Of course, most of them supply s-ata power cables. Should this be a raidcontroller card? (I suspect)
Without knowing which one or not, I can only guess.

Topicality 49.61%

I have 2 started from the hard disk which depends on the Sata0 connector. Every time it starts up, it will be displayed for a short time. Now you can turn off the controller, which immediately starts Windows. Sata hard drives connected.

I thought I was going through this

Topicality 49.61%

Then the device that has no drivers right click on drivers, or NEN way to get under Seven running. I also need drivers for

Adaptec 3000S
Adaptec 29160N
Adaptec 29160

Does anyone know what's suitable and update drivers or so go online. Computer right click
->
Features
->
left automatically and installs it.

 

On the manufacturer's side, there are devices to select managers.

PS: Can not provide any info about my machines, I have Raidcontroller, and I need a Vista x32 or 64 bit driver. The driver does not look for any vista drivers for this card.




Hello all,

I have the following, I have an Adaptec 3210S SCSI currently just a LAptop.

 






If internet goes then that's easy.

Sources:
https://www.drwindows.de/windows-vista-allgemein/3129-problem-energiesparmodus-via-raid-controller.html
http://www.pcmasters.de/forum/88969-problem-mit-raid-controller.html
http://www.pcmasters.de/forum/59290-problem-mit-raid-controller-bei-msi-k9a2.html
https://www.windows-7-forum.net/threads/problem-mit-meinen-raid-ahci-controller.1649/
http://www.pcmasters.de/forum/104248-pcie-x1-sata-raid-controller-fuer-externe-esata-raid-gehueuse.html
https://www.computerbase.de/forum/showthread.php?t=1695139
https://www.windows-7-forum.net/threads/raid-controller-lief-tadellos-als-sata-controller-ploetzlich-geht-nichts-mehr.51296/
https://www.windows-7-forum.net/threads/raid-controller-und-ein-bisschen-raid-basisinfo.5085/
http://www.pcmasters.de/forum/115822-nach-raid-controller-einbau-kein-sound-kein-controller.html
http://www.pcmasters.de/forum/87711-raid-1-raid-controller.html
http://www.pcmasters.de/forum/12194-raid-controller.html
http://www.pcmasters.de/forum/30601-raid-controller-fuer-eigenbau-nas.html
http://www.pcmasters.de/forum/92496-sata-6gb-s-raid-controller.html
http://www.pcmasters.de/forum/69298-raid-controller-hilfe.html
http://www.pcmasters.de/forum/104041-externer-raid-controller.html
https://www.winboard.org/vista-installation/76488-probleme-mit-raid-controller.html
http://www.pcmasters.de/forum/6273-raid-controller-pcie-x1-bus.html
http://www.pcmasters.de/forum/25761-raid-controller-2xsata.html
http://www.pcmasters.de/forum/32349-raid-system-controller.html
http://www.pcmasters.de/forum/91004-gigabyte-ga-870-ud3-rev-2-1-raid-controller-abschalten.html
https://www.windows-7-forum.net/threads/adaptec-scsi-raid-controller.1192/