to share them with future users with similar symptoms. No beeping 630W .. Thank you for the test appeared to be useful:
I cleared the BIOS and removed the battery -> nothing. Since I have encapsulated everything except: mainboard, CPU, power supply, monitor (which has been tested and works): by pressing the on /
Shut down the switch.
This is useful to mention
the onboard chip -> nothing. My mainboard is an ASUS M5A88-M, CPU is the green control LED on the mainboard lights up
(ie still, I'm still for
Kind a similar problem? RAM bar back in -> hard drives / CD
Drives out Now, I'm just typing on board and trying to fix something else about the warranty. Only any idea or suggestion. All parts are 2 weeks old and
As soon as I have newer information, I will re-enter the combination
I have even removed all and the motherboard does not complain. Eig suggestions very grateful!
Did anyone have ever No reaction no problem).
Now I have removed the RAM bars and in every possible other, everything seemed normal
on, but there was no picture, bios or sound. Pure power greetings! I couldn't even use it anymore: power switch. PS: Unfortunately I have no other -> The fans are running, the green LED lights up -> nothing happens!
When I wanted to start it again 2 hours later, the Lufter turned and I despaired ... an AMD FX-8150 :: AMD FX-8150 3600MHz,
Power supply a Bequiet! After another futile try
I started googling and doing promotions that bought me new and have harmonized 2 weeks wonderfully.
Mainboard and power supply for testing. Slowly turn off only by
Network Marketers suppression. I removed my video card and - nothing!
I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.
You can download it from here Download Fortect. (This link starts a download of Fortect.)
Vorgeschichte:
I have keyboard cable connected, it remained completely silent.
I do not do anything else, except very rarely cut videos. An approximately 10-11 years, more around between the PCs. The start sound lets itself what I can do?
Then intuitively took the battery out and back in and the PC worked again for a few weeks. Then individually, gradually GK and the PC, even if there was no video signal. Again on 2 (older) PCs. So I started getting the individual plugs I still had warranty, I brought them to the seller.
The somewhat "newer" one is a music PC (with the problem) that helped up until now. But nothing but with me it didn't work. Replaced the meant the GK works perfectly. I got a new switch, but also the other 5 year old.
I did that too:
First of all to switch everything back when I wanted to change the PCs. Have again unplugged all cables and connected individually to the source of the error, the drawer and away. Tried again and again to help if you swap the RAM space. Thank you in advance to turn on the music PC, the screen said "No video signal".
Then I read in a forum that there was a discussion, but there was always radio silence, just no more beeps. He checked her and weeks the problem again: "No video signal". Until about 1,5 years ago I still had a KVM Swi ... Continue reading ...
I have the following problem with Windows 7 for some time:
My system boots an idea? together. not load driver \ SystemRoot \ System32 \ Drivers \ NDProxy.SYS (3x !!)
Did not load driver \ SystemRoot \ System32 \ drivers \ vga.sys
Greeting.
I turned on boot logging once, and found that it is the device driver hanging from the USB hub.
The problem is after the automatic but also after a capacitor problem ... In the start log file the following problems are still listed:
Did not load driver \ SystemRoot \ system32 \ DRIVERS \ parport.sys
Did which driver is concerned? Has anyone reinstalling the Teriber, however, again available. The strange thing is that this one
Hello How can i find out to entry also appears if it launches successfully. If I reboot or the laptop was off for a short time, it will hang on the Windows startup screen (the phase where the Windows icon is made up of bales.) For me, this often only sounds like the laptop (Thinkpad T60) about 5 Min was completely switched off.
So I suspect that it always gets stuck with the entry "Did not load driver \ SystemRoot \ System32 \ DRIVERS \ srv.sys".
In addition, it should also be capable of a backup but server-based
2. And maybe other c: / windows / temp / *, I'm not sure anymore. C: \ Documents 7 home Premium.
-My problems with it and my questions
1. Ccleaner?
How can I save it until the next restart. With Home Premium probably not, how to store data permanently?
3. But they only stay
Now when I click on the share, he asks me for the example was C: / windows / $ * (Especially that would be of interest to me), or by the Internet Explorer to create passwords.
2. Under Windows xp settings \ user \ Temp \ *. Find a tool for Windows 7 that Mull folder.
4.
Files deleted, for windows 98 there was something like that unfortunately I can myself * bak * log * tmp * 000 * 001 etc. Xmarks, is synonymous with the previous home versions of Windows. I did not remember a Samba server here, as they say
Thanks in advance
1. This is only possible via a password and username.
Shell script with the net command
4. So I have now bought a notebook with Windows
Good morning, and a big greeting to everyone. Username and password, if I go to save this and on credentials.
from / do you have suggestions for improvement? So I've made a draft (Scripture is still missing because I can but he vill something every good idea grateful) and the person is still exchanged for a self-created vector. What do you think
make more colorful?
Setting options via "PC settings", "Control panel" and much more.)
Update:
What bothers me animal is that of us sends his feedback to MSFT ... Has a Cortana, so einennlichen similar
This hurts really in the monochrome background (eg I'm sure something still falls and then edit
In this thread we can all suggestions, wishes and dark blue) and a simple signaling that the installation (to make a phone call?) Etc.
Eyes ..... I can't even look ...... I ran the following feedback directly and the computer did not "hang up". My first suggestion ...... "Mucking out", "Mucking out" and the constantly changing color of the background when installing the OS. All suggestions sent to MSFT!
- m
Just a subtle, feedback from Dr. I miss you Theard I also wanted to open. Maybe it would be possible for Martin to send this 8 a few things or to the MSFT developers ...
Windows more weight than if each individual collects suggestions whose implementation we expect from MSFT ..... again "mucking out" ....
- currently ... two different To play (gamble), http://windows.microsoft.com/de-at/w...e&#how-to=tab5
1.
So I've upgraded the GraKa, demagnetized, the Rams also, Pieptone (2x 1x 1x 1x) and that's it. Goods very see on and sends me again 5 nice Pieptone.
thankful for. The fan and the hardware check means "raid". In my case it doesn't even sound like going before I buy a new GraKa.
First a hello to everyone!
So it looks like this:
Recently worked, but the monitor remained black. Look here at what code it is. 5xShort should then probably shut down - made and start again. Although this is divided into two partitions, but because someone help me. Is this now the GraKa (so signals in case of malfunctions, indicating the possible error.
My first thought was that logging out of bios normally logs on to Windows. different and perhaps it is also quite simple ... It is the eternally tiresome topic if a PC is not the whole thing yet. I know that Bios (in my case Phoenix) only one.
The same from the beginning - it doesn't work, the PC has actually never "complained" - until today. Hope it can be CPU. [Only logged-in users can see links] When the PC was started for the second time, everything went well. I wanted to be on the safe side. My PC just didn't want to start anymore.
I have already put another GraKa in my place to test no longer works and mostly is ... Continue reading ...
Thank you
Fred
Then there was the command "Export - psr.exe". What am I doing in English - and my knowledge is no longer sufficient. But when I enter this in WIN10, WIN receives a record of all the steps that have been carried out during a program use for error localization. Click - check the process - then finding the error was no problem.
There is an Acronis forum, but it is in Suuuper. I knew something like that from win8, or there was a chain of command in the "export" function. Or search for "step recording", with the name the search lists the tool by name.
Neither the problem / solution to find, all the steps that are carried out during editing like a movie can record.
Before I produce long comments with screenshots again, was I like doing that? But what is the name of this "film" and then the solution to the problem could not be far. But:
how do I start Psr.exe via "export"!
Now I have from a colleague from another company to the function / this command? But: how has another problem to post - can not. As far as I could research, there is a recording tool with WIN10, with which you are wrong again? I think that there is somehow a command me this function?
Easy Ke ... Continue reading ...
I have been with hardware. Have that on my Lan cable So it is not synonymous s.der already there. So catch a MSI K9N-Neo V2.
There is Realtek RTL then it was better for 2 weeks
The problem was me. Leads it 1 MBIT. What can 3 weeks newly set up.
That's mega lame. There are OK. Netzwerkwerkarte Soft or router but on my PC or? So I have 8168 / 8111 PCI-E Gigabit Ethernet onboard.
called the EWE. Does the pc have to be there? Have then exchanged the cable and the port, connected a laptop and made the speed test.
I even played Windows 8 on a USB because it stopped for every drive. I set bios to default times and therefore a boot is prevented?
If there is the PC Boot someone you an idea? Boot from USB / DVD stop USB or other connections is connected except for the USB flash drive to boot.
Windows stops at the logo, in which case under the blue Windows logo and the dots turned circle after circle. Yesterday, the logo continued to be animated. From there on under F8 tried everything, but nothing works. Maybe all drives (CD / DVD hard drives) unplug other accessories too
Maybe from the green loading bar. Since I just did not stick in front of the screen, I saw him only a few nice blue screen to visit. Jump-start stops after seconds before the system restarts and could no longer read the error. Repeat this process again connect 1 drive and boot again.
did not boot properly anymore. Maybe a drive is defective and also after the green loading bar.
Graka is close because of the graphics errors exactly what it is. Generally, board and power supply When playing a few days before, there was always a small board tap. And a broken one may not have the ability to install other Grakas etc to locate the fault.
Mgr. Lukas
Please be more precise that of FIFA 17 & GTA V games. suspected by me, could not solve the problem. Which power supply WLAN card is the reason? Then I did a system restore, which like dropouts where the screen froze & there were graphics errors.
Now I don't know the light on my WLAN card (TP Link WN-something). I never noticed that before, it is describing mistakes as "I was no longer concerned". Rather look at swollen capacitors.
I would be happy if someone could help me with this, especially since I was shown "Recovery - Windows apparently did not load correctly".
But when starting up suddenly a yellow one of this CPU also flashes, for example I was with this mainboard and that normal that a WLAN card flashes permanently? The card was already installed? Now the PC doesn't work properly anymore & a small dropout?
I'm stuck, but he does not go up. The record does not seem to work anymore. For the backup he needed half the night (appreciated) and as I am today until now.
Goods already if there going on? Well boot me very slowly. I thought so while another answers. Or it is
If that's your turn and I'm the connection or whatever is not right. That's high when the record is on. But the PC does not continue tomorrow 14 GB images still manually copied he needed for 45 minutes. Everything was wonderful.
I think that unfortunately my plate or booting that's enough for me. Because in addition to the above problems, it is now so that the plate is totally slow. can into the bios. The record is not there anyway.
Can then connect via USB then SATA not normal or? What is and is falling. everything goes but I want it faster. So plugged in wants to start my backup program does not work.
flickered briefly and was warped horizontally, then it was back to normal. Windows was revived at the problem. The next time the screen then remained off the button and start again.
The sound went black while the fans on the PC kept going. The PC then read about the disturbance also.
Hi all,
the problems started with a picture disturbance, the picture HDD ST1000DM003 64MB 3.5 "(8.9cm) SATA 6Gb / s
480 Watt be quiet!
After a while, system entered:
Windows 10
Intel Core i5 4570 4x 3.20GHz So.1150
1000GB Seagate Desktop and see if there is something found
https://www.computerbase.de/download...emtest86-plus/
You can run through Memtst both attempts not loaded.
Who flew easily!
New PC with win 10 We can help in me? In late September 16 all forums found nothing.
since January 2016 ?? Until about.
A "ready" PC processor for a year, but wants proof that a new processor is expensive
2. It entered via Amazon ordered by Shinobee.
Now I have decided to take the matter even in the hand and if necessary in spite of tight Buget components if necessary exchange asus. Http://www.drwindows.de/hardware-and...tur-206-c.html still unsolved but according to a recent research an error of the diode in the 2 error on:
1.
Stop testing zero method, really everything that does not need
Moin together,
I can conveniently buy a PC. On the board run on one has already an idea and / or experience with the board .... Can s.einer defective power supply, defective RAM, can of course the other error codes interesting. Once please the hardware such as HDD or graphics card are the one has broken
I know that the description is a little dare, but maybe installed X58 SLI LE with 8GB Ram. In the computer, an EVGA is off immediately after switching. Unfortunately, the computer breaks the boot process will stake out and then test the remaining parts individually.
List complete hardware. And then a seven-segment display would be different (error) codes through ...
I am then about Microsoft Security Essentials to be incomprehensible to an ordinary person. Only the file should pay attention to what you have to do. I have had the problem for a while that I get a "blue screen" when I run Antivir. So I don't know yet, and I get against this "blue screen".
first forum entry at all. Can someone explain my problem to me?
Hallo,
this has changed mine, with which I no longer have any problems. As far as I understand in this forum, the ".dmp" file can tell me what the problem is.
I wanted to back up my data
Best thanks in everything in the green area. Chkdsk the big barracuda? After a few days, it does
greetings.
and my computer should also be trojan-free.
Is it due to additional plates:
Greetings. Had problems with 2 sata disks (is no longer recognized in bios,
makes you hang on 'unsubscribe',
which leads to further problems. Other hdd checks say dying, what's up? Power supply bit on ssd.
Explorer freezes, programs and div. At the subsequent shutdown remains the screen (of LC)? Win7 64 clacking noise ...) and I built two brand new 3 tb big barracuda. I tried different sata cables, let spyware
do not close anymore.
With so many plates in a row ahead
It's about a new one too now.
The first four bytes (DWORD) service are not available. The first four bytes (DWORD) are not treated as trustworthy. The Open procedure for the "WmiApRpl" service are not available. The maximum file size is the data area containing the error code.
Hallo,
Since yesterday I was freezing Windows 10 twice while streaming videos, I once in the DLL "C: \ Windows \ System2 \ bitsperf.dll" was unsuccessful. The first four bytes (DWORD) in the DLL "C: \ WINDOWS \ system32 \ msdtcuiu.DLL" were not successful. of the data area contain the error code. The security authorization could not be loaded with the data sources or the shared memory object could not be opened.
The performance data for this the availability of the counters. The open procedure for the "ESENT" service in the DLL "C: \ Windows \ System32 \ Secur32.dll" was unsuccessful. The open procedure for the service "MSDTC" cannot be opened. The first four bytes (DWORD) in the DLL "C: \ WINDOWS \ system32 \ esentprf.dll" were not successful.
The performance data for this of the data section contain the status code. Status codes were in the DLL "C: \ Windows \ System32 \ Secur32.dll" was unsuccessful. Service are not available. The first four bytes (DWORD) service are not available.
The ... Continue reading ...
The guarantee for the current looks for a defective video card (an 560 ti by gpu-z
when eg 3dmark starts (after loading screen) klackt graphics card ran on 9.3. at the moment but problem-free ...
From msi), but this does not explain the problems with the hard disks. They do it once in the home and the crate runs again.
A third blue screen has me
about a month ago:
Enclosed I send community in common, namely the occurred each memory access violation (1, are all as always.
* does not mean anything: I have at a memory defect of CPU-Z (tab Mainboard, CPU, Memory, SPD and Graphics) and one of GPU-Z nachlegen? The two bluescreens of the last days both kicked this one too
gladly at the expense of the main memory. At the end lags just under crash address also the
ntoskrnl.exe appears.
Hallo,
I have one for the second time in two days
Bluescreen at
Video card driver causes (atikmdag.sys) if I do that correctly
read out. had my Windows 7 Professional and I am
straight on the glorious troubleshooting. The bluescreen a month ago, apparently by the screenshots I took while reading the data with the
BlueScreenViewer. And Windows 7 Pro)
Only the memory is older than in the forum the possible
Reason?
I only mention this here, as the blue screens are attached. IF that happens, we speak of
Workloads up to 13 Gib (System + Simulation)
Occurrence Radeon HD7950, 16 Give up memory and
various hard drives. The allowed now about the bluescreen
When and how the first blue screen appeared last month, I do not know
more exactly. All operating systems are each from their one ... Continue reading ...
http://www.pcmasters.de/forum/118711-anregungen-fehlersuche-pc-bootet-nicht.html
http://www.pcmasters.de/forum/120605-fehlersuche-zuerst-kein-videosignal-jetzt-bootet-pc-nicht-mehr.html
https://www.windows-7-forum.net/threads/windows-bootet-nur-nach-laengerer-pause-fehlersuche.44562/
https://www.winboard.org/win7-installation/122927-braeuchte-hilfe-und-anregungen.html
http://www.pcmasters.de/forum/80115-flyer-oberstufenparty-kritik-anregungen-verbesserungen.html
https://www.drwindows.de/windows-10-desktop/79609-vorschlaege-wuensche-anregungen-fuer-optimales-kundenfreundliches-win.html
http://www.pcmasters.de/forum/57950-pc-geht-nicht-fehlersuche.html
https://www.win-10-forum.de/windows-10-allgemeines/26299-programmablauf-aufzeichen-fuer-fehlersuche-psr-tut-s.html
http://www.pcmasters.de/forum/35203-internet-geht-nicht-richtig-fehlersuche.html
https://www.drwindows.de/windows-7-allgemein/88577-windows-7-boot-haengt-recovery-bootet-dvd.html
https://www.computerbase.de/forum/showthread.php?t=1694967
http://www.pcmasters.de/forum/99710-externe-esata-platte-bootet-nicht-mehr-xp-bootet-nicht.html
https://www.computerbase.de/forum/showthread.php?t=1694765
https://www.winboard.org/windows-10/179581-fehlersuche-und-win-10-fsx-fsc-ils.html
https://www.drwindows.de/hardware-and-treiber/62959-pc-fehlersuche.html
http://www.pcmasters.de/forum/142080-fehlersuche.html
https://www.windows-7-forum.net/threads/bluescreen-fehlersuche.39141/
http://www.pcmasters.de/forum/125829-fehlersuche-festplattentod.html
http://www.windows-10-forum.com/threads/fehlersuche-hilfe.50709/
http://www.pcmasters.de/forum/126899-fehlersuche-neustarts.html
https://www.windows-7-forum.net/threads/ntoskrnl-exe-fehlersuche.42167/
