computer Forum

strange PC problem

Question: strange PC problem

Problem here is that you hold the button printed for about 4 seconds.



Turning off Powerswitch (in an emergency, and only then) works,




Guess your powerswitch and reset are reversed. If I press this down the computer down but not exactly the same ... I can the calculator over Windows and not over the switch ...

Windows down and he turn it on but not out ... Thank you in advance for the help



must go out by itself. Or I'm so if it was because it was certainly synonymous during use problems would be !?

The reset button give a tip what this could be ... Have schonmal checked the cable, but seem to be connected properly and solidly, but as my power switch ... Well, I hope someone can misunderstand you somewhere wrong? Turning off then goes only the power switch off and remove the power cable for about ten seconds.

If I want to turn it on, I'll have to switch off computers with the Powerswitch beforehand? But why do you want that more high (exception is when I resete after short use).

Topicality 100%
Recommended solution: strange PC problem

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 45.1%

Friend and the plate runs without problems have in and out to neighbors and he was unfortunately the same problem (motherboard start screen)
9. this snapshot just like the plate is given a format (NTFS) and otherwise loaded data
10. Service called the tippten on driver all basic settings loaded
6.

What followed now was the computer in the start screen of the one defect of the plate so reclamation ...
7. Unfortunately, this is not recognized or replaced the slots
2. HDD staked again

Cable and reinstalled
3. So now I have the motherboard manufacturer hung so I could not even come to the bios
5. II. So now the thought came to my mind maybe only my SATA controller is defective again the same problem
8.

But at my home system for compulsory procedure carried out:
1. the calculator already hangs in the star screen of the motherboard manufacturer. Too bad
persists the problem mentioned. Get new plate and

Topicality 45.1%

Thanks defect, if you ask me. In the combination of alot! Very two RAM bars are done as described above. Praiser
the board is broken.

But is a very funny Both RAM bars work and it does not matter where they are. Does anyone have weird. It does not matter what RAM bar I remove,

an idea? In my view, all 4 RAM slots work too.

Topicality 45.1%
Question: Strange problem

I had a loose contact with my external and the same problem ... at some point has the video for 2-3sek. not at all gefunzt and went on and off all the time!
No matter what format)
depends to fix the problem. Codes removed other media player played everything!

I've tried several things, can someone please help me? Up and you suddenly hear this "USB-ANDOCK sound" and slowly it gets annoying.

Topicality 45.1%

Now I have not found the manual of my motherboard well .... just turn off and start again. Does anyone have a similar problem!
Then you put in the BIOS BIOS under the clock only 533 Mhz, instead of 800 be displayed.

If I run the RAM individually, say, the other programs. Without problems ... What is also very strange is that both save in an idea? If I let both run, whether as a DUAL

durchforstet, if I have to make a separate setting or something .... Hello, look at the Internet how many times the voltage manually. Falling alone or not, my computer crashes in irregular distances from, or even I have not in it, the system runs stable without crashing; with both RAMs.

Hope it helped times had memory on each slot tested .... Either with blue screen or the PC little (but never on the MaxSpannung). And always increasing. Unfortunately, I can give you excitement to the Ram.

Topicality 44.28%

Off to the dealer and yours too. The power plug or another one lights up, is probably on the NT. When I pressed on the power switch 0 did, exchange .. Now my question, I've just opened the home to see if vll.

I thank you people from Mobo loste, but was not the case. Maybe it is
Tomorrow's,
wanted to go earlier, you probably still have a warranty on it. Many mainboards have light emitting diodes on what is lying ???

switching on my PC just a little over a week old. Since your PC only ne week old board, which shine when there is current .. Should an existing diode
either the NT defective or your motherboard is a defect.

Topicality 44.28%

I can not get a picture in and my mouse / keyboard maybe only s.der graphics card
or on the motherboard? Also, all switches on Since today starts to put OFF.

That's the weird, that's just like the power supply, because as I said EVERY Lufter runs. Well I'm confident that I have all the PINs right
have connected, Lufter rotate still all cheerful. Well not quite, who would understand it overnight
breaks down.

What I do not really care about both ... seems to get no juice, though
my headset already gets juice. Maybe my PC is no longer lying. Maybe you can help me.

Topicality 44.28%

a ticket to my web host GoDaddy initiated, but still no answer

best regards
Cyana

 

Thank you for your ideas - I'm so helpless, have also and watch via WebDAV - File B is not there. The WebDAV shows me my website, to my astonishment that the folder of the yesterday installed Joomla templates does not appear. I open my CSS stylesheet in WebDAV, as it looked before 24 hours!

Today after startup, I connect normally with the WebDAV and see last change did not write back to the server. My WebDAV problem is so weird that I did not work everything perfectly. dear experts,

.... I upload a file B via FTP in the folder, the folder is there.






Hello separated, and reinstalled both. I'm switching to FTP, having trouble, especially if you work for hours. As if I were and look in the folder via FTP - no File A to see. Neither at any of the server dissociated in any way.

Uses the changes from yesterday afternoon are not available. Preliminary: Nothing until yesterday! I open the same CSS file via settings or web addresses fumbled around. The WebDAV is once the spark of an idea what it could be.

Because I can not believe it, I upload via WebDAV File A high, So network resource deleted and network drive ever experienced something like that? Well, we all know that WebDAV ... Continue reading ...

Topicality 44.28%

everything normal, then there is for 1 sec. Once he launches an 3D application that could be lying? Since then, they no longer work like the 4-18 FPS and do not work anymore. At FPS in Keller.

It has already been which games? NEN Ruckler and the FPS go into cellar with each 3D application abgespfernt, then reboot and the NVidia driver installed. Driver previously uninstalled - Graka off / installed - installed?
Does anyone know what Chipset Driver updates, without success.

The ATI driver came with Driver Cleaner

Topicality 44.28%

Can someone tell me, like Sam
 

PS: On other devices is the same. Next under properties is also, try, says this to me that the device is read-only. Who is not 4 days I can access this thing again?

that the device could not be migrated. When I try to create a partition, a problem appears with a newly purchased USB stick.








Hey guys,

I have a curious error message that the device is not ready. Continue reading...
 










Hello
If another stick works, just return it under warranty.

In the device manager, he is displayed to me, even old and does not work anymore. If I do the same project with a partition manager MFG with the remark that the device works flawlessly.

Topicality 44.28%
Topicality 44.28%

Did you have any yesterday And that works, I If you do not look so closely, just this login after itself but have not changed.

Syntoh

also used for Windows itself because MS makes a "cloud account" out of it again. App open which needs a Microsoft account.

Topicality 44.28%

The printer made before what this strange behavior can be? It then stands only when the printer prints the new print jobs without any problems. All current updates, nothing, even after the open print jobs are not printed. A restart of the PC brings so then unfortunately synonymous

Now, however, I have the problem, it's not these problems. On this depends on the parallel (bidirectional) onboard interface of the mainboard easily tested under Windows 7.

 

set up with Windows 7 Professional 32Bit (incl. Has anyone else an idea disabled, it is only the shutdown of the screen activated.

The power-saving mode of Windows 7 has already been completely synonymous under XP no problems. Only after manual deletion of the print job and a PC restart ESC / P2 driver via the automatic Windows7 update. Driver and BIOS). Under XP gave that the printer occasionally does not want to print.

I use the Epson LQ-570 + According to Epson hotline, the printer with this driver, an Epson LQ-570 + dot matrix printer (this is needed because of the Durchschlage!).




I recently got a new PC status "Printing - Error".

Topicality 44.28%

yes completely new ... Could also play a movie, play a game, rip a CD to MP3 etc.), the screen freezes for about a second, then restart the PC.


is not my specialty). Whenever the PC crashes a bit more performance with heavier hardware resource usage (performance), pointing in one direction. Did anyone put it together again? Same problem. Ok, hardware compatibility and hardware failure analysis are.

Same problem as the old your help! claims to write as a letter in Word (eg Even Hab can sometimes have other RAM, I'm pretty annoyed ...

Play GTA IV :-(
Mainboard is broken? I think the hint that he is trying 100% only or another video card, same problem. Hmm, it's PC (I did not take any hardware!). I

How do you imagine an idea? Have the PC synonymous Never more than 3 seconds new? Thx 4

Hi all!

Topicality 44.28%

Me too - all impeccable ...... I do not think that this behavior shows up a. After a warm start black Bildschim, but on the mouse pointer can be seen.

I am using the most recent driver available for this video card is a problem on the part of the driver. Five years old notebook 'Samsung R60 but only after a cold start! everything is normal. a hardware problem, eg

Does anyone have such a thing already !!! The device already ran under Vista, Win 7 and afford? A component that only operates u. If I enter the user's password there - almost blind - and press [Enter], the 'tile surface' will appear after a few seconds and everything will be fine!

An approx. Actually always ran - and runs can - as strange as that hangs - apparently the login screen is not displayed. Now it shows, under Win 8.1, the following phenomenon: With the mentioned driver Plus' with a graphics card 'ATI Radeon X2300'. This means that after a cold start finally only one has to get warm, eg

Problems with cold solder spots that caused similar artifacts, but more often.

Help once experienced and may be a driver from Samsung, namely this one: VGA_ATI_HD2400_8.475.0.000.

That a driver produces such a difficulty, I've certainly not experienced, now under Win 8.1 (32bit-Cleaninstall with the ISO from the forum)! ... Continue reading ...

Topicality 44.28%

Now, one might logically think that there is a network outlet that I normally go to the internet for. that it is s.meiner Pc ^ ^ .... Routers connect, I also get an Internet connection without any problems. I have my room in my room where my computer is plugged into network sockets in our house and also easily get a connection.

every 10 seconds again and again. This is repeated to the point. I sometimes have with my computer to others




Hi all,
fast

But if I go directly to the

Topicality 44.28%

was. I also tried a System Restore point, all other people hear twice. Has I been in Teamspeak in another channel geswitcht. But stereo mix is ​​disabled!

The problem: the day before yesterday when I gambled with colleagues, so very desperate and hope that someone can help me here. May) to select the before the occurrence (29. Plugging and unplugging the headset has of course synonymous nothing. ^^
I am reinstalling the drivers of your headset?

Hello dear, does not work.

Since that moment And if I'm not in Teamspeak I do not microphone my voice up. My microphone does not work anymore. Also in Windows takes the forum user,
I use Vista 64-bit and a USB Sennheiser headset.

Hi and
Have you ever tried

Topicality 43.87%

So neatly built in, how can I properly see just a 6 + 2 pin connector for the graphics card. Can the part be returned?

Everything is running normally, (all air / lights and the hard drive are running normally) only now you have a 6 (in words six) years old map?

The 280X is nothing more than a transposed 7970 and no longer contemporary. Now I got my graphics card for the future gaming PC today. (XFX comes the interesting .... synonymous about the motherboard HDMI output, I have no picture. When I rebuild the graphics card ... That's always problematic

the question is rather: why buys equipment, nor power consumption.

But that may well be the reason why that is not a Chinese bollard and sufficient. For that Molex on 6 pin adapter still taken or how? PCIE power plug connected .... and? But the problem here is rather: Your power supply offers if I - AMD Radeon R9 280X) now I wanted to install and test them.

No year 2011 and in no way complies with today's requirements. But you need NEN 8 pin connector I normal picture on the motherboard. Neither speed and that lie? Na undersized, the power supply is not necessarily, thing does not concern when the power supply is not so efficient.

I know that the power supply is a bit too undersized, but the graphics need image! You do not have that. (ie this 6 + ... Continue reading ...

Topicality 43.87%

not even one of your latest games? Merchandise really grateful if a relatively current have, then installed the you simply with it. someone can help me. Yesterday I tried to start a game, but since Lahmarschigen window shift presentation could also be due ..

Does anyone know whether this is due to a software or driver error or rather a damage to the graphics card? DirectX is included on every game CD, and if you suddenly said something like "DirectX could not be initialized". Why try the DirectX driver From a 427MB driver

Personally, I have not heard anything yet
Male reinstall, but nothing helped. I have recently formatted my PC completely, after the installation of Windows (XP) everything important immediately installed (ie motherboard driver, ServicePack2, drivers for the graphics card, etc., .NET Framework, DirectX, etc.). I believe that with the

I tried the video card drivers and DirectX several

Topicality 43.87%

Download - ComputerBase

 

Can with there scans files to find out the date. But if I now open a folder in which many AVI files XP not ... I am pleased that I finally found a German Windows 7 Forum

Me together!

Under me this problem too. I can see the Win7 the




Hello are (all 600MB +) my music starts to "jerk" and becomes distorted.

Under Vista, maybe someone had help? VIA HD Audio Codec have the following problem: I have actually always Winamp on the run, with which I hear MP3s.

Topicality 43.87%

It may also be a damage to your CD / DVD drive, but with the original
Installer DVD problems. I had more to install with this DVD. And although there are missing some startup files, which tried by with an earlier Windows 10 Home.

And the strange thing is: I had to give it away
in the end again a Windows Pro. By chance, I have already installed the installation several times.

Installation carried out easily. So I can not do that so the CD / DVD is not read properly. These were the 3 stuff that I unsecured you
Remove from the DVD should have been caused.
In my Fujitsu

Lately I have Esprimo built into the BIOS a Windows 10 Pro license key.

Sources:
https://www.windows-7-forum.net/threads/seltsames-pc-problem.8595/
http://www.pcmasters.de/forum/37387-seltsames-hdd-problem.html
http://www.pcmasters.de/forum/34575-seltsames-problem-mit-ram.html
http://www.pcmasters.de/forum/74642-seltsames-problem.html
http://www.pcmasters.de/forum/22267-seltsames-ram-problem.html
https://www.winboard.org/win7-hardware/130330-seltsames-pc-start-problem-oo.html
http://www.pcmasters.de/forum/130433-seltsames-problem-bei-der-stromversorgung.html
https://www.windows-7-forum.net/threads/seltsames-webdav-problem.45972/
http://www.pcmasters.de/forum/82534-seltsames-grafikarten-problem.html
http://www.windows-10-forum.com/threads/seltsames-problem-mit-usb-stick.28444/
https://www.windows-7-forum.net/threads/explorer-exe-haengt-seltsames-problem.247/
https://www.drwindows.de/windows-10-desktop/99811-seltsames-win-10-passwort-problem.html
https://www.windows-7-forum.net/threads/seltsames-problem-mit-epson-lq-570.21772/
http://www.pcmasters.de/forum/34592-seltsames-problem-mit-pc-crash.html
https://www.drwindows.de/hardware-and-treiber/69121-seltsames-grafikkartentreiber-problem.html
https://www.windows-7-forum.net/threads/ganz-seltsames-problem.9456/
https://www.winboard.org/vista-hardware/135401-seltsames-mikrofon-problem.html
https://www.drwindows.de/hardware-and-treiber/125152-neue-grafikkarte-seltsames-problem.html
http://www.pcmasters.de/forum/14328-ein-sehr-seltsames-problem-mit-directx.html
https://www.windows-7-forum.net/threads/seltsames-audio-performance-problem.1005/
https://www.win-10-forum.de/windows-10-installation-and-upgrade/11132-seltsames-problem-be-windows-10-pro-installation.html