computer Forum

Second monitor on notebook operate - wrong resolution. What am I doing wrong?

Question: Second monitor on notebook operate - wrong resolution. What am I doing wrong?

And that even in the ideal resolution - am I wrong? I see the image on the fixed monitor only in 1280x768 (so I have above what I make it, so greyed out), so that for each monitor the ideal is chosen.






I liked my notebook (15,4 inch display) with and below a strip) and on the laptop left and right thing from the picture. So I have two monitors, both of which are not ideally addressed in this case. In such a way that I select the same resolution of 1280x1024, but have just no picture on the notebook display. I can not change the resolutions either (they are for the notebook display 1366x768 and for the 19 inch tft 1280x1024.

Now I can print the picture on both monitors on the notebook using the combination windows key and p and then select "double". ati graphics card operate my 19 inch tft monitor in parallel. But what happens is the following: I connect the 19 inch tft via vga, can see the image on both monitors at the same time. If I choose the option "projector only" (ie second monitor), I can see the ideal parallel, but not in the correct ideal resolution.

Topicality 100%
Recommended solution: Second monitor on notebook operate - wrong resolution. What am I doing wrong?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 82.82%

This survey is intended to show what resolution the monitors of the Windows 10 forum community have here also the performance owed a lower resolution? The standard resolution of a PC monitor has been around for several years
Participation is voluntary as always. The poll is here long

Monitors and if so, for what purpose? There is one disadvantage, however:
- the paths Are you planning to buy a new one soon? But some also go the way, with Windows 10 completely also some users who have several computers or even a multi-monitor setup available.

Hi,
I have 3840x 2160 on a popular full HD, which consists of 1.920 x 1.080 pixels. Beat yourselves
In the whole pixel delusion of smartphone and tablet development many desktop PCs are left behind. Do PC-players absolutely have to play their games in 4K, or with the mouse are a little bit longer? The survey is set up in such a way that multiple answers are possible, as there may well be quite surprising results.

Although the survey results should have been clear, you can start over and create new, more powerful hardware. in the comment section. Although the answer should be clear, it would be ultra full HD 4k curved 65 inches upscaling. desirable?

Every opinion is okay for you ... Continue reading ...

Topicality 74.62%

In addition, I would like to know if I should buy a docking station from Dell, I have it apart (http://www.harlander.com/Dell_UltraSharp_U2410F_610cm_24_TFT_WUXGA_i631_366 80.htm) but has a resolution of 1920 * 1200. My laptop has a maximum resolution of 1920 * 1080, a monitor on it and best regards! Many thanks schonmal I do not know me with.
2 monitors at home with 2 different sizes.

Can there be problems of that should not make any problems, have myself representation on the devices come? I can not tell you anything about the docking station, since I have a Dell laptop, or is that ultimately not decisive?

Topicality 72.57%

My Can you not adjust this in the game options themselves. Max. Help screen is much smaller.

So what is that ? Resolution is its own. 1440x900 but the one for a game?

Topicality 72.16%
Question: Resolution wrong

Normally the screen has been updated when the graphics card is updated. So I have the same Today I turned my PC on and still weird. ne resolution of 1680x1050P.


see: The resolution was set very low. The monitor driver is often lost Acts always changed; on 1600x1200 pixels. Greetz
leaders
Selection. :/ What do I do now?

But that is not for

Hi!

Topicality 71.75%

The oversized presentation remains even after deletion standing instructions to solve your problem:

For AMD graphics cards: wrong resolution, distorted representation
 

What else can I do???
 










@ Luisianer, try it with the bottom is not more.








Hello, with the last Windows 10 update I was able to install the graphics card (ATI Radeon 3000 Graphics), the drivers and new installation after restart. After the current update, switch back to "previous driver" and the problem with the wrong resolution was solved.

Topicality 71.75%

screen resolution:
Adjust the corresponding menu for the background and the aero design. Switch to "stretched" here and check the greeting. in an empty desktop area. Can this resolution be selected with a slider and the monitor still distorted?

Windows 7 also adjust the transparency.
Hintergrund:
The last pattern named "Frost" can be found in the settings window. Today I'm from 'Windows Home' 1024x768 px.

Click once and then you will find the item "Desktop background" below. And the following problem has arisen: The resolution has now been completely changed and the menu item "Window color" is located in "Desktop background". In the settings window you can now choose the resolution, menu "Customize". Can I find only one resolution that is too high and one that is far too low under 'Screen resolution'.

Have a try with the screen resolution you've apparently already found. Then somehow change that in the popping up? That there is no 1024x768 resolution or Vista? This is how it currently looks for me: Spoiler: a small heading called "Bildposition".

Is not there really one or do you have Aero Design?
Right next to Premium 32-bit 'switched to' Professional 64-bit '. whether the background now corresponds to your ideas. My monitor is
Man ... Continue reading ...

Topicality 71.75%

The Scaling around Rocket League was used in the split screen and the Nvidia control panel offers me 2560 * 1024. For this you had to define the monitors only as two individual, but probably a second Graka would be necessary to hang on the second monitor for the VM. and on the next a 4: 3 section. Or by software rendering in the VM similar problems or solution suggestions?

As a resolution 3360 * 1050 was offered, so that a decent picture was displayed. Best regards



How about a VM that assigns you the second monitor and then one of you can play at the host and the other at the VM ?! Have tried synonymous custom resolutions to separate monitors to play and we like to do again. Say on a monitor washed-out widescreen, if everything supports the mode.

Now I myself have Windows 10 installed Has anyone create already, but unfortunately they are not displayed to me.

Topicality 71.34%

PS: Latest ATI driver is installed (also for your help.




Hallo,

I have the following problem, for which I also have a resolution of 1280 x 1024 over VGA. Thank you if this is still from 2008)

 

Each time the computer is restarted, the resolution of the primary monitor is adjusted to that of the Philips and the Duplicate screens option is activated.

So after every restart I have to move all desktop icons to the Windows resolution menu. I am working on a Compaq 6715b notebook with an automatic resolution change to disable? I also close a Philips TFT 190 P with a resolution of 1680 x 1050 with Windows 7 Enterprise. Of course then go and adjust the resolutions correctly via "Detect" again.

Is there any way this has found no solution after hours of research.

Topicality 70.93%

Has larger font with me, etc. Is this sample proof times on 100% (default). Many thanks for your help,
Regards
Will

You should get the actual video drivers of yours
Download graphics card and instal.

Below I can only see half the start menu, and I was also able to set everything to "large" under Win 7. Is there simply no message that I can install it? The resolution above and on the sides is missing a lot from the desktop ... At 1600x Something) see the screen is cut off!

Only if I have the whole desktop. Is there any way to resolve it in the other (eg Has not brought anything, I had a more recent driver?) Now I have yesterday installed Win 10, via manual setup program (how wonderful worked out.

Otherwise you could not see anything from the couch 1920x1080. Now Win 10 has taken over the resolution and the enlargement. The other the problem known? But the whole edge Win 10 to adjust that manually?

Topicality 70.93%

After the installation, windows 10 had a high processor load & wrong resolution
According to the mobile phone deswegeb it may be that I make mistakes
lg artur

Read more ...
 










Hello, I went from win 8.1 to windoes 10, because I would like to test the new features. I have an Acer Updater from Nvidea was not grafik graphics update and I was at a loss. Now i am back on windows xnumx and i had disabled updates on steup
I Aspire 7739g [notebook] with overheating problems.

Topicality 70.93%

Does anyone have the same problem or even another solution?
 










@ Fietsche, try it below with instructions to solve your problem:

For AMD graphics cards: wrong resolution, distorted representation
 

it does not exist anymore.








If I see that correctly, the forum with the same title is already closed with three solution suggestions. A current graphite driver

If I do not work all three solutions with me. Now I have the problem that the most recent video driver is already installed. Solution) comes the message: It is a search (acc.

Topicality 70.11%

Oh, Graka is a Sapphire HD6850 hung on the TV, the same result. always tries the same problem. Lg oaschbagasch
However, as soon as I connect it via HDMI, someone has scaled slogans.

There are margins on the sides, the aspect ratio is also right Have the PC sometimes HDMI and monitor is a Syncmaster Full HD. I find neither s.Monitor nor everything wonderful, but I would like to connect via HDMI for the purpose of sound. Was great, if not quite and the picture is of course blurred by the scaling.

Driver installed nau, times the screen age despite set native resolution of 1920x1080. When I connect my monitor to the PC via DVI, PC will work properly to fix the problem.

Topicality 69.7%

Thank you

Your AMD Phenom is not compatible with Win 10 (Nvidia?) What can I do? I think the graphics card AMD Phenom II X2 560 does not activate Win 10? When I change the graphics card, then goes out II X2 560 is a processor, no graphics card! Probably only the right drivers for your devices are missing, so they have to be installed first.

Have a look in the device manager (right click on the start button and the appropriate selection) what is specified there under "graphics card".

Topicality 69.29%

Have in bios or in the What can any help! I do?

Then you can reinstall the GPU drivers Safe mode, unfortunately, found nothing. Thank you for and set the right resolution.
Now I get after Windows load no more image because the monitor the resolution is not set in the graphics card creates (message: change the refresh rate).

After that you should restart the PC, the picture had to come from the MB. Max.

Topicality 68.88%

I do not want to. I go to monitor 1 everything is there correctly (see pictures 1 + 2), so good.

Hallo,

Apparently I'm too current (5: 4 monitor) 1280x1024. If I go to "only show on 1", 2 monitors with different resolutions can be operated.

Have you already set it to the correct resolution 1920x1080, but have absolutely no picture on monitor 1 ... If I go to "duplicate" on monitor 1, have I tried the control panel of the graphics card software?

Have my TV with his HDMI cable s.den Calculator connected, for example, the Eurosport Player synonymous times s.TV can watch. So far on both monitors to get different resolutions ..?

That should work now that you have the same setting on monitor 2 as in 1. Which setting do I have to choose in order to get that blod. If I go to "only show on 2" I can THEN go to monitor 2 (pictures 3 + 4), I can't set anything ... Since the TV screen has a different resolution, I liked (in Windows 10) the monitor 2 (for the TV) set the resolution 1920x1080.

Monitor 1 (PC) has no picture on 2 at all.

Topicality 67.65%

When connecting via LAN lack of shielding or at some point I found that to receive. With monitor only data throughput of about 12 MBit / s. Without a monitor I had one does not exist the problem.

My router ran so far on channel 11 0,8 MBit / s over WLAN. Applications my internet was drastically slow. Continue reading...
 

plugged VGA connection cable, there is a significant reduction in the data flow. Storeinflusse on the wireless module in the laptop, by the laptop

Whether the problem also exists with a DVI connector, I could not test.








On my laptop, I had a second monitor monitor on the VGA port at least at acceptable 8 MBit / s instead of the previous 0,8 MBit / s. Reason:
Due to wireless network can be set (network - wireless - channel).

Solution:
On the router, different channels can be connected for that to give more space for editing different windows, or After I set this on channel 5 I came with and had a data throughput of just under 12 Mbps.

Topicality 66.83%

Do you have the DVI or VGA on it?
Anyone else has reported the problem of the problem .. It annoys me extremely, after each reboot, the problem fixes very grateful .. Ware for a piece of advice, but this has not remedied.



Hey guys. Have already in the purchase thread to call the whole thing and have to change.
Have you already had the "PowerStrip" program with the Samsung T220?

Topicality 66.42%
Question: Monitor resolution

Does he recognize who he is?




I have the following problem:

My 26 "monitor is running Or just tell which monitor you have.

 

Update monitor driver, so the computer then not taken over and also does not appear in the list of selected resolutions.

Greeting
Bent

 






is the monitor as vll. My are up to date. under Windows7 not with 1920 x 1200 pixels. All drivers as pnp?

monitor inf, or I can manually specify this resolution in the Catalyst Control Center, however, system will:
Wets.

Topicality 66.01%



Hello your professionals since my question is placed correctly. Can I get that somewhere the screen is not there. Thank you for your info



You can set up a custom resolution in the Graka driver

Depending or somehow nachinstallieren or something? Now I need what your (not mentioned) Asus for a (not mentioned) Graka has, for example

But that's outside,

So, I have the following problem. But I'll try:

I have a laptob from the brand ASUS. 17 inch monitor. At Nvidia the screen resolution 1280x1024. First of all, I do not know if it looks like this:



Sources:
https://www.windows-7-forum.net/threads/zweiten-monitor-am-notebook-betreiben-falsche-aufloesung-was-mache-ich-falsch.36257/
https://www.win-10-forum.de/windows-10-allgemeines/4615-umfrage-monitor-aufloesung-welche-aufloesung-hat-aktueller-monitor.html
http://www.pcmasters.de/forum/136474-laptop-1920-1080-aufloesung-und-monitor-mit-1920-1200-aufloesung-kombinierbar.html
https://www.drwindows.de/windows-7-allgemein/54805-windows-7-falsche-aufloesung.html
http://www.pcmasters.de/forum/89477-aufloesung-falsch.html
http://www.windows-10-forum.com/threads/windows-10-update-falsche-aufloesung.72909/
http://www.pcmasters.de/forum/112666-falsche-aufloesung-nach-betriebssystemwechsel.html
https://www.computerbase.de/forum/showthread.php?t=1655395
https://www.windows-7-forum.net/threads/aufloesung-aendert-sich-nach-anschluss-eines-zweiten-monitors-automatisch.3883/
https://www.win-10-forum.de/windows-10-allgemeines/1961-falsche-aufloesung-1920x1080-funktioniert.html
http://www.windows-10-forum.com/threads/windows-10-falsche-aufloesung-hohe-prozessorauslastung.16620/
http://www.windows-10-forum.com/threads/bei-amd-grafikkarten-falsche-aufloesung-verzerrte-darstellung.72666/
http://www.pcmasters.de/forum/91166-falsche-anzeige-trotz-richtiger-aufloesung-ueber-hdmi.html
https://www.win-10-forum.de/windows-10-installation-and-upgrade/11078-upgrade-windows-10-aufloesung-falsch.html
http://www.pcmasters.de/forum/123885-monitor-defekt-alter-monitor-schafft-aufloesung-der-grafikkarte-nicht-tun.html
https://www.computerbase.de/forum/showthread.php?t=1737021
https://www.computerbase.de/forum/showthread.php?t=1686687
http://www.windows-10-forum.com/threads/langsames-internet-durch-zweiten-monitor-bildschirm-hier-loesung.43692/
http://www.pcmasters.de/forum/57771-samsung-syncmaster-t220-native-aufloesung-nach-jedem-neustart-falsch.html
https://www.windows-7-forum.net/threads/monitor-aufloesung.3489/
https://www.computerbase.de/forum/showthread.php?t=1668056