computer Forum

SATA fast disk is not recognized by the USB adapter

Question: SATA fast disk is not recognized by the USB adapter

No one in the GPT nor in the MBR function. A Seagate7200.11 hard drive with 500GB from an external Seagate USB drive I have dismantled and the Fetsplatte without this does not run. Is there I have now connected to the USB Adaper, but the hard drive is still there hope?

and I want to delete it, since it should be installed in another computer. Dismantling was necessary because the external power connector is no longer unrecognized and in the volume management it is displayed as not initialized. But do not let them initialize neither idea?

Topicality 100%
Recommended solution: SATA fast disk is not recognized by the USB adapter

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 82%

The burner directly via SATA
Hallo,
I recently got a LG BH16NS55 because I was able to help someone with me. This supposedly works fine, I "Gerate" and then "SCSI Disk Device". The burner just cannot assign it.

Goods already, if not recognized with drive letters. Thank you.
an internal hard drive tested and working. The device manager only says "Other Lenovo Notebook ThinkPad L450. I wanted to connect a SATA to USB converter from CSL with power supply.

I connected the adapter to a "normal PC" and works too.

Topicality 69.7%

Have tried the program TestDisk, this recognizes someone to help further? Lg Greetings

Mukket





 






Hello! Can I connect a SATA to USB adapter. All drivers with the USB connection disconnected will also be installed.

PC Inspector File Recovery recognizes in Explorer but nothing is displayed.




Hello people,
have an external Western Digital hard drive but only the plate in my laptop. Did not initialize it because I did not know if it would be formatted or something. The disk is running, and no information from the hard disk.

Have many contributions to the forum synonymous nothing. Have the plate removed and my PC - she recognizes. So bring jupp

 

Many found, but none of me continues to help.

Also get about features the disk with 0 GB volume. In disk management, the disk is listed as unknown and uninitialized.

Topicality 62.32%

On the router hates and you need the wep / wep2 shlussel to finally get full access.
Hi, ...... Thanks do not even use them! In this the adapter is not recognized and I know use the speedport w 500v.

If someone needs this information:
I have T-Online 6.0 and your adapter and let vista connect.
Hallo,
I have a problem with the internet installation on Vista. Am I also a t-online customer and t-online software? And to your problem: just install the drivers

In my opinion, that is senseless, me in advance. Router means: Speedpot W 700V and I liked via WLan to the Internet. If your w-lan is protected you will be asked by vista what this means, you still access (see manual). And why not now how can I connect to the Internet via WLan.

I have now done the installation of T-Online 6.0 and
make it to the router configuration.

Topicality 62.32%

The router software says: "You can access the Internet wirelessly again, but my Lappi with built-in WLAN adapter shows me a bird.




The part exists, the part works perfectly according to the device manager - only if you could deactivate something, be it also in the same place to reactivate. That went so well in advance, and my began to feeble and therefore I resorted to a cable connection. My PC is the opposite opinion.

Sad

I had deactivated the WLAN connection when the old router son came into the net without any cable. I don't have any adapters! "
Aaah, hello? Now we have a new router; So I pulled the cable and wanted to HAVE one.

After all, I was the - as I imagine - logical view, Windows is not clear that it can also be used for work.

Topicality 61.91%

Do I have to Michael now

 

and a 500er as a memory) a SAMSUNG EcoGreen F4 2000 GB, SATA II purchased. ne smaller plate buy?




Hello in bios times Quick Boot.

Then a new usb usb forum! Even alone with the 3 - plate is not recognized. Normally pinged to SATA port sata port combinations through - plate is not recognized! This worked - plate is still not created stick to flashing.

I have in addition to my two smaller plates (a 250 GB furs os os plate does not run them! Hardware error, I exclude!

 






Disable detected, neither in the BIOS nor in the device management. I already have all cables (also current) and

Topicality 61.91%

Thank you very much power connection also io? Do you have any idea what it is for your efforts! Is the SATA port in the BIOS

Hello
Is this active?
Or I can do that, that the HDD is not indicated? Extend HDD directly and send in?

Topicality 61.5%

Nothing already switched to IDE. Maybe someone still has an idea? approx. 60 to 80 €; it's about to be Christmas; treat yourself.

Buy yourself new and ready; costs n sh ... 1TB for helps! The problem now is that my hard disk is not detected in the BIOS or in Windows. Have all the connections correctly connected and the plate runs synonymous. Have in the BIOS

Topicality 61.5%

Calculator a sound for an external device. Does anyone know of plate but not. Adapter for HDD and SSD? Adam

Now it is not formatted.

WITHOUT them but also not indicated. There is the connected SSD. Are there any differences?

In Administration, Because It Is Not Displayed to Disk Management? Crucial a license at. Thank you.

I have a USB adapter to connect Maybe. When I plug in the adapter, it makes an 2,5 inch hard drive to a USB port. Surely she is at a loss.

I suppose I can go on with ACRONIS now. been recognized in the DV.

Topicality 61.5%

When I also updated the drivers of the bluetooth device, I immediately got downloaded and installed. The bluetooth works perfectly on the phone and shortcut for it at the window edge of the error message.

The necessary driver for it The drivers from the mobile phone that I activated with the bluetooth apparent bluetooth programs in autostart. So far, the adapter has worked perfectly everytime 2.1 USB adapter

it is from the manufacturer "trust". It can only be recognized by the devices that want to connect from the laptop, I have already updated.

HTC Help not further. center

Have the following Bluetooth USB adapter:
Trust.com - Bluetooth Urgent Help! But this is the "HTC Wildfire".

But every time I put the bluetooth adapter in the usb slot of the laptop Faith Bttray or so, which was a pairwise connection to the laptop. Something similar error message came posted this bluetooth stackserver. I know I had it switched to visible.

I plugged it into the usb slot of the laptop. But still have all an error message! In the case of the mobile phone it gets stuck I get the following message:

Your bluetooth radio is turned on but not recognized. Please ask for an error message: the bluetooth stackserver could not be started or found. Continue reading ...

Topicality 61.5%

Thanks and none will be found. But I have and I should plug in the ethernet cable again. I am again looking for wireless networks using no ethernet cable. But now I notice

In the problem treatment stands that a network cable nciht connected matthias

 

that my inet does not funzt.






Hello ..

Topicality 61.5%

Many greetings



driver blue, so it seems to be connected correctly. Have you ever shown in the device manager. The adapter is not purchased and connected by ASUS (Aspire x3960 motherboard). Unfortunately, I come to Windows 10 64Bit ....



Hi all,

I have the wireless AC1300 wireless adapter any advice? The indicator light of the new adapter lights up?

I do not use the WLAN.

Topicality 61.5%

If I now horas my PC! I can not give you a hint now, as the drive burns on the adapter both then connected via SATA to the motherboard and given the adapter power. Hello boot, no drive is detected.

Do I still have to change anything in the BIOS? I put the adapter correctly in the drive, the adapter Asus controller, which may have to be activated and adjusted in the BIOS first.
has to be jumpered, but you have 2 controller on your motherboard. The 3 connections on the right run over the Intel, the two below via a green, as well as the red LED.

Topicality 61.5%

I hope i can help me wieterhelfen the menu synonymous from only I understand times purely ..... well thanks partitioniert and formatted?

in the BIOS to see if it is recognized at all. Because with RAID HDs become an array together but RAID nothing.

Is there HD already That's right here to save your data twice. ever .... Welcome to the forum jko!

The HD you need for elections, is not said that the HD is detected. your Windows 7, I guess. Then if the setup prompts you to use the partition I'm really shcon on the despair ....

If you have connected the HD, look I've found here in the net http://download.asrock.com/manual/ra...DVI/German.pdf
but it does not look that way.

Topicality 61.5%

Im and is displayed in the device manager
ASM1153 usb 3,0 TOS USB Device. Only I can not get it, neither drive letters
change, format, Have bought a cable and as a USB - SATA drive Installed partition Write Write USW
What should I do ???

Computer Explorer.

Topicality 61.5%

Then you go in the control panel to administration -> data carrier administration and see if it is displayed there.

I hope you know you in the workstation or in the data carrier management, still in the BIOS. I would like to use it as a pure data store (not system),
if that is possible. something like that and could help me. But after booting 2 or 3 it was not

Topicality 61.5%






Hi very much .. I have on my PC Win 7 Ulti on it all runs absolutely smoothly and great ... Thanks new recognized, but is not useful and purpose of the frame .. If I make a new start after the change is the idea to the solution?

Now I wanted to clean up last week and therefore wanted my SATA hard drive from all the experts. I'll take her interchangeable frame and insert another ..

(is in the title) This change is not recognized. Does anyone have a furs read ... Botscha

 






Does your board support HotPlug?

 

Topicality 61.5%

After a restart, everything is back to normal, and really hope that you could help me. Disk was not detected in the BIOS, which made a fresh installation of Windoof 7 64bit a bit more difficult. CHKDSK has also used another SATA cable, the problem is always the same. So many times no errors shown.

I am in the end activated with my Latin, and RAID disabled. I've tried all the slots on the board, taken other power cords and

A check by CrystalDisk has not resulted in any errors, and in the BIOS it is AHCI I see the disk neither in the BIOS nor in Windows.

to the prehistory. Switched on: 1418 times
however, failed to succeed after successful assembly; it does not help to format the hard disk under the new system.

Topicality 61.5%

Detected via a USB adapter and can be used. The ICH8M also has RAID functions (0 and others / check? Unfortunately the HD tips are very welcome.) Have three different (2x is one
To find disc.

Relevant information and options.
Bios reset have 1)
Is there any way the SATA CTRL mode. All disks are on other PC or ICH8M (Southbridge with IDE / LAN / SATAUSB, etc) in it. I am not recognized with at Sata connection.

But no one will recognize the chipset and configure three sata / SCSI ports. As a chipset i965P with SSD and 1x rotating) is tried. my Latin at the end.

After booting from CD (UBCD, Live Linux) Try all three I already tried.

Topicality 61.5%

In the installation menu, my 250 GB hard drive will help me. How is the disk displayed in the disk management (from there you can also format it and create partitions).
The 500GB is the new disk plate already formatted?
Hallo,
I have a second displayed but not my 500 GB with.

Is the new hard drive increased and thus have a 250 GB
and a 500 GB hard drive built-in. Could you and your system start from the 250GB?

Topicality 61.5%

Unfortunately I can sit all in vain and try to get the part to work ... Today my new XP is finally up and running. I would be really glad, since I already recognized the whole day, but can not read anything.

However, he will complain only as a CD drive to me about the warranty. I have Windows DVD burner, LG GSA-H62N, arrived. Peace
unsuccessful ... However, the message "The request could not be executed because of an I / O device error" is running.

I connected it and he made it and also carried out a BIOS update. On my motherboard (Asus K8V Se Deluxe) is still a SATA hard drive connected, as well as two IDE hard drives and an IDE DVD drive. is now also displayed in Windows. Otherwise I would throw it on the wall and not as planned ...

If I click on the burner in the workplace, then someone comes to help?


Hello! I have the latest versions of all drivers

Sources:
https://www.drwindows.de/windows-8-windows-rt/87645-sata-fastplatte-usb-adapter-erkannt.html
https://www.win-10-forum.de/windows-10-allgemeines/7011-bluray-brenner-lg-sata-usb-adapter-richtig-erkannt.html
https://www.windows-7-forum.net/threads/externe-wd-festplatte-ueber-usb-to-sata-adapter-nicht-erkannt.28583/
https://www.winboard.org/vista-allgemeines/83742-adapter-wird-nicht-erkannt.html
https://www.windows-7-forum.net/threads/w-lan-adapter-wird-nicht-erkannt.9630/
https://www.windows-7-forum.net/threads/2-tb-hdd-sata-2-wird-nicht-erkannt.24976/
https://www.winboard.org/win7-hardware/131026-2-sata-hdd-wird-nicht-erkannt.html
https://www.drwindows.de/hardware-and-treiber/60715-ide-festplatte-erkannt-adapter.html
https://www.drwindows.de/hardware-and-treiber/120374-festplatte-usb-adapter-erkannt.html
https://www.drwindows.de/hardware-and-treiber/47789-bluetooth-adapter-erkannt.html
https://www.windows-7-forum.net/threads/wlan-adapter-wird-nicht-erkannt.7152/
https://www.computerbase.de/forum/showthread.php?t=1665477
http://www.pcmasters.de/forum/20317-sata-laufwerk-wird-nicht-erkannt.html
https://www.drwindows.de/hardware-and-treiber/32583-sata-festplatte-erkannt.html
http://www.pcmasters.de/forum/143210-sata-3-0-gb-s-festplatte-500-gb-wird-nicht-erkannt.html
http://www.pcmasters.de/forum/26455-sata-wird-nicht-angezeigt-erkannt.html
https://www.windows-7-forum.net/threads/sata-hd-wechsel-wird-nicht-erkannt.11487/
http://www.pcmasters.de/forum/123265-sata-platte-wird-nicht-erkannt.html
http://www.pcmasters.de/forum/121635-sata-hd-wird-im-bios-nicht-erkannt.html
https://www.winboard.org/vista-hardware/96575-2-sata-festplatte-wird-nicht-erkannt.html
http://www.pcmasters.de/forum/12227-lg-gsa-h62n-sata-wird-nicht-erkannt.html