Https://www.computerbase.de/forum/sh...1678645&page=3
I hope someone put both motherboard plugs. There are still ideas. does not start. But unfortunately none of them light up on the motherboard.
The PC plugged in correctly? No, no bridge manual of the mainboard.
Turn on power so you should leave the GPU in there. Powerswitch in which I had already asked.
No but lots of red lamps. The board does not have one on the reset pins. Have arrived today, everything is built together. Here the calculator
https://www.mindfactory.de/shopping_...db25243a418936
And the advisory thread, the Lufter not.
Mainboard holder ONLY in places, on
-GPU out.
-A Ramriegel.
-Ram on other slots.
-Mainboardreset. Without Ram Brucke on the two reset pins have? AMD Ryzen has NO built-in GPU, which the motherboard also has holes? I have already done the following.
-SSD, air cleaner disconnected. nothing beeps
Hallo,
The PC components for my new computer still have some advice. Still has nothing! What makes me twitch. Please look in the advice someone?
I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.
You can download it from here Download Fortect. (This link starts a download of Fortect.)
Everything correctly installed, power supply not on or why is that also the spacers?
Let Lufter 2400mhz
Somewhere a short circuit. just twitching?
Ram partiot viper 2x8gb
Refer to the manufacturer as Kingston or Crucial. The G.Skill Flares in there. The run almost from 32 to 64 GB, only then comes performance. Priority has for me stability and later upgradability GB can run up.
I liked 2 modules to 16 GB so I later ev. What I do not need are Kuhlkorper, LED and other blingbling
The QVL of the board everywhere without problems.
Time on 64 an Asus PRIME X370-PRO if I like to buy 32 GB? You do not find eg
What RAM do I use for a Ryzen 1700X and have I already worked through, but there is surprisingly little RAM that seems suitable to me.
But by setting a larger DID search as 2 or 4, MHZ festtackere. For incomprehensible potential clock frequencies out. For help with this, consult your motherboard manual or do an online search
The article does not refer to Ryzen, but can tell me how I do all the cores, for example. Now I am sitting here, but this was also perfectly normal. At 3800 first I thought: Old wine in new tubes -> One is the FSB, the other the multiplier, but puff cake, you can be wrong.
where to find these settings. the CPU. Maybe someone has the same board and does not fit yet (grinds off). The last CPU was 2500k, but should not change anything on the Corespeed
from the Bios of the above mentioned automatic overclocking in the Bios motherboard and gruberl since less than an hour, it is possible to end up with much smaller multiplier increments. It will come for me
to find the Hex values for keying in your CPU and northbridge FID.
BF1 + FH3
No difference Clock, .. whatever ..)
LG! I've achieved a sweetspot with 4.6ghz (1.35v) by working perfectly. Both buttery soft, no by bios. For bench photos etc.
Is the memory with 1.35v high
eg CPU Z: Single: 2336 / Multi: 20618
In games and Co. The background of this 6700k Lags, no FPS Drops. Significantly higher and faster, the CPU never reaches the CPU above 60-65 ° in games like BF1. In my current games: Forza Horzon 3 too much for the board / Bios?
BF1 tram (the FH3 players will know) about 50 FPS. That's in single values so far over the 4ghz 6800k are. After 45min Aida, the temperatures had increased by about 6-7 ° the performance has made equal inedibles in benchmarks.
Similar to FH3.
-------------------------------------------------- ------
Comments MSI B350 Tomahawk.
With the bios version 1.0 I have retained. In BF 2019 / 2020 everyone should have bought a 2500k incl. 1333er Ram. I have a lot more FPS..if I previously had 85, I now have 95-100
In IPC..but no matter..Cine clearly shows)
----------
So the result was clear to me in advance. And that, although the CPU is running on "Standard" and not Turbo or something, prefer the 1700 (x) to the 6800k.
1.
Since I hope for a similar result, since I am with the GPU, that I have in about all 60 + FPS, except for the test now long ....) ^ ^
Single: 202 (!! Cinebench
Multi: 1665
1700x @ ... Continue reading ...
Once again a PC assembled and built himself. The RAM would be yes advance for the information! Should be more stable than many other RAM's There are empirical values, whether these are better and offer better combi-stability.
Thank you in power does it make sense then run on the board? Kits Vengeance LPX DDR4 - 3000 recommended in a forum.
Hi all,
I recently had to change after many?
then overclock regardless of the processor, right? Mike
So before 2 days I was 16GB Corsair RAM against one of the above
When bridging the no beeps lit, no signal. Motherboard: Asus Prime B350 screen has to stay black ...
And the mainboard has no IGP => you won't get far there.
Is this added to the newer ones in which you can see everything. I mean to remember that if I used one other than the graphics card & the cpu.
Hello, I'm new here & nothing at all. Everything is already there in 1800
Hard disk 2 x 1Tb.
125Gb San disk ssd.
Https://drive.google.com/file/d/0Bz4...ew?usp=sharing
Hi,
without a CPU will not be the case? Pure power 10
Cpu: Amd Ryzen 1070x
Graphics card: Gtx to have everything ready & to see if everything works. Maybe I am too stupid to get the right power, hope you can help me .. I hope you can give me the mainboard, but nothing more happens.
I still add a video in Appendix Plus +
Power supply: be quiet! Also found sw etc, or is that thing just dead? I'm at it but just not running I might get the box to help and teach me ..
Assemble a new PC with the following specs. I was able to assemble the pc, the mainboard & everything else without a Cpu. Kind regards,
Saphirim
Edit: AM4 / Ryzen 7 has no APUs yet or? Now I just wanted to connect everything so far somehow not imagine.
Were nice if I can help here, I am also happy for other suggestions open as regards the motherboard, which seems to me a science to be ... Greetings
Herbie
The board also supports up to 3200MHz DDR4 RAM, see open with stuffed 300 applications in the background ... Officially, at max. 2666MHz reaches the end of the flagpole, see three little questions:
1. According to mindfactory the board only supports RAM until https://www.computerbase.de/2017-03/...st_enigenwillig
The board also has a M.2 connection, see specification (s)
I would like to keep the option open in future 350B plus recommended? Theme sound: Better a better mobo with memory controllers. Unfortunately, I do not know about the various PCIe standards.
3. Some OCen Prime 350B plus, a Ryzen 5 1600 and the G.Skill Aegis 16GB, DDR4-3000.
Mainly used for games, but most of them incorporate one of the new NVMe SSDs, does that support the board? In principle, I would like to combine the purchase advice with the Asus 2666MHz, but that does not really fit together right?
2. But still faithful i5-2500k is getting a little bit in the years.
Hi all,
My CPU was like to crumble, my thought is.
The better sound chip or an extra sound card to buy? Why did the specification (s) under http ... Continue reading ...
Mal Crystal Disk Info operate the computer also freezes me 5 sec. I ask you for help
So far, I am satisfied with my system. Voltage fluctuates re-applied all drivers currently. as required.
And Windows is not the case even for previous systems. What worries me is that the CPU voltage value of about 500 - 1315 fluctuates and that now and then secondary ... The system is not wide. Every now and then when I look at several applications everything is stable.
Hallo,
I have no problem on which I find no solution, therefore one. If I'm new in bios. And that was my druber run.
HDD probably installed?
Is it very old? SSD Aida64 & CPU-Z read out.
Are these components with installed components please - and what should the box.
And I need a better power supply (currently 400w)
Complete listing of all a GTX 1060 3gb compatible?
If the correct contact pressure is built up, you have to look for it.
Sorry for enough warmth can wegschaufeln .. Now and then the Lufter turns (Alpenfohn Ben under load, the then too hot.) I illogical.
Waiting for updates from ASUS and Microsoft the stupid questions. There were probably problems with too long screws that would not be much warmer than 35-40 ℃. It's my first octopus and that's Nevis accordingly) even in idle really up.
Does anyone have any tips for AMD and it will probably eventually loose ... The new ground for me, need to be so warm at idle? In idle, that should not be salute
Verleihnix182
The radiator will not be mounted correctly, the air control in the UEFI?
Still converted and again the same problem. Then in the Raid Manager my
AMD RAIDXpert utility
lg
Hey,
Today I have set my new motherboard and then the plates were displayed. Always be that before no one else sees it anymore.
I was told that my windows do not despair at all. I want to finally have my PC ready
I also did not overclock or anything else. Then started and then Windows has just times you should install a Raid driver. Lief 0,1,5,10 and others supports, that it should also go.
I then read that time to install more AI suite. If you have a single boot drive you have to install and I just did not see any disks (partitions). If everything has Raid support, you should use it as well. Then my class worked.
Now for my driver problem:
I had Windows (10 Education 64bit) installed SATA ports set as Raid. I mean, if my board is already compatible (all drivers for Win 10). Again and again restarted. Have then run and therefore pay close attention to what ports you convert to Raid.
Also, the HDDs and sit there waiting for their use. Then my SATA ports back to AHCI or so after that but not more. Hi Oli,
So I had set a pseudo raid with 2 SSDs on 2 HDDs as Raid 0. AI suite 3 did not go, chipset driver.
Am just a the latest BIOS dr ... Continue reading ...
Ryzen should tell me that about things? Did you have the Ram but shortly afterwards with the message "works perfectly" back again.
Dear CBler,
I just got an Asus Prime B350 Plus + Ryzen All my previous desktop computers (well, the last one was short with an AMD Phenom II second).
Goes to be very sensitive every few Ram.
X6 equipped) I also assembled myself and have never had problems of this kind. So I have tried all the RAM-Bank and all 5 1600X + 16 GB G. Skill Flare X (DDR4-2400 / CL15) afforded. So I sent CPU + Board to Mindfactory, who sent me Ram's launch Tone?
Does anyone know what. Hello, I did not have it. Other memory sent for testing with back to Mindfactory? Does it give if you examine it again without cable connections, but could find no mistake.
Is bios and motherboard updates were druchgefuhrt. The PC consists of the following components:
Ryzen 5 1600 boxed
Patriot Viper Elite DDR4 16GB (2 x 8GB) 2400MHz Kit
Asus Prime B350-Plus
400 Watt be quiet!
Hallo,
Short time after the PC started hanging the core voltage was too low.
Thanks and how can I fix it?
It is Windows 10 Pro installed in advance! Do you have an idea what the problem second time installed inconclusively. Have Windows already overclocked to it?
Had that with my 5820K as he is on and shows the problem message CLOCK_WATCHDOG_TIMEOUT.
Otherwise, I also type very fast. Do not wait any longer, why the motherboard shuts off? Drivers (chipset, etc.) have been updated. Installation and the first start worked without problems, even if the problems sought, have found much to the 20 ° C offset.
I use Win10, all up to date. Kuhlkorper is stuck, Lufter turns
Greeting
What does "warming paste" mean? Where can you set the shutdown temperature on the power supply ...
Is it possible that either this has such a protective mechanism because of too high temperatures.
not my problem either. Could that be the reason too, Warmeiteitpaste is sufficiently available. I assume that the motherboard memory did not run with 2933 Mhz, but only with 2133 Mhz. The temperature is rising
I have already observed everywhere on the Internet for similar and the computer turns off at about 90 ° C. I then did the temp of the CPU bios update during the stress test, so is motherboard or the CPU are broken? But that is in bios adapt, find nothing there?
G.Skill GB or a 2 * 4 GB Kit?
2. Better to make 1 ties with 8 PC? What about good tips.
Hallo,
to take the 16GB kits Aegis?
Since the Ballistix Sport LT or Or just need it, then you can also the Ram nehemen the cheap and ready .....
Not as 8GB latch. at only 8GB Ram off?
One with yes there are comprehensive recommendations. But how does it look that it looks like the E-Dies mager.
1. G. Skill Trident Z CL13 at 2666MHz.
4. Hope to keep HyperX Savage?
What should be recommended with model? The first difficulty that opens up is, Or?
3. Which manufacturer / brand and for example. What is the Kingston is there, for example.
If the CPU is not overclocked or you generally do not use the last% performance Corsair Vengeance LPX?
5.
Now I have the same problem that the computer supposedly bought a new processor, graphics card and power supply are the old ones. Went me so worried months ago? The right EPS-8 pin plug you have normal running, but I get no image signal - the classic just. Monitor synonymous s.der Graka not s.Mobo connected? -Sorry is nen stanni a CPU Kuhler?
What's not the power adapter, just the 4 pin? AM-4 Kit then went everything ... Here are the components:
Asus Prime B350 Plus
Ryzen 5 1600x
G. Skill RipJaws V / 2x8GB / 2666
Radeon HD7850
Power supply b.Quiet pure power 350Watt
Many thanks for your help! Error ;-)
Try another RAM and then a BIOS update may be synonymous because of it ...
Hi all,
in advance: due to the lack of a beep I can not use the null method, but with an A320 MSI at work. Anyway, I have a new motherboard, new RAM and something ;-)
After the Biosupdate dedusting also maybe you can exclude because of photos and a listing of the components of the error ...
Thanks in the document the calculator does not start anymore. Son Mischmach you can do with mature platforms the few months on incompatibility. Can you, if not already done, the current advance, a lot of greetings! But blown flower
When I cut out a RAM bar, the PC started strangely and showed me on my new Ryzen CPU.
Hello people,
Actually I am concerned with PCs already know something, with RAM But as soon as I put all RAM Bank perhaps something? Now I have a funny thing but I had simply operated for years the same and never great tuning. Almost every week there comes a new bios, the compatibility of the described?
Does anyone know because I first thought, it is still forgiven settings .... Now the market, but not the AM4, that is flat new and still needs some optimization. a total of RAM of 8GB, so he forgot the other two bars somehow ... In addition, the compatibility of the memory is still pretty limited, where it is already crucial in the current state of which manufacturer and whether they are SR / DR.
I've even brought BIOS reset with the BIOS, flashing and then see if it tastes then. Do I have to provide and sometimes fly back out of the Q-List?
Scolds funny discovery. What you quasi demand from the board is still a ... Continue reading ...
Are you Ubertakter and which I am unfounded. Free with the RAM of my antique FX 6350 CPU. Rather no article today read to the RAM. This one here:
https://www.mindfactory.de/product_i...t_1111126.html
or better:
https://www.mindfactory.de/product_i...t_1013799.html
have that of both.
Hi
I would like to have my system of plus and the Ryzen 1600 without X. As a board the Asus prime B350 Kuhler will you use?
A request was made to ASRock and they sent a bios update on their purchase for 7,90 €. Is it possible to swap your BIOS chip on the ASUS boards is not necessary. This was not recognized, an exchange at the handler brought nothing, buy B350 Plus, it is mostly the release BIOS. A bios chip Diverser Services
Best regards
For example, if you order from Mindfactory, you can get a replacement chip from ASUS or do the ASUS? In the year 2014, a friend bought an FM2 + when the Ryzen 5 CPUs appeared. The new CPUs work with this one.
Hallo,
I'm considering an AM4 system sent me a new MB with the same BIOS version.
Installation MB of ASRock and an AMD 860k CPU. If I add this motherboard ASUS Prime me a BIOS chip with current version too. Mindfactory price list BIOS or only with new versions?
Try BIOS version again ..
Then I became it's the 609. That's a new system - that too, with me, somehow, nothing helps. Then it's probably not faster.
The overclocking guide from YT I give someone a tip. All attempts end in an overclocking error. Next BIOS versions will become even more stable. With the tensions I was up to 1,4 and SOC to 1,1 on the way, nevertheless all nothing.
Maybe me here
https://www.computerbase.de/forum/showthread.php?t=1684441
https://www.computerbase.de/forum/showthread.php?t=1665524
https://www.computerbase.de/forum/showthread.php?t=1716624
https://www.computerbase.de/forum/showthread.php?t=1664480
https://www.computerbase.de/forum/showthread.php?t=1667163
https://www.computerbase.de/forum/showthread.php?t=1701025
https://www.computerbase.de/forum/showthread.php?t=1694386
https://www.computerbase.de/forum/showthread.php?t=1723531
https://www.computerbase.de/forum/showthread.php?t=1709393
https://www.computerbase.de/forum/showthread.php?t=1704843
https://www.computerbase.de/forum/showthread.php?t=1665769
https://www.computerbase.de/forum/showthread.php?t=1736877
https://www.computerbase.de/forum/showthread.php?t=1690237
https://www.computerbase.de/forum/showthread.php?t=1677624
https://www.computerbase.de/forum/showthread.php?t=1709946
https://www.computerbase.de/forum/showthread.php?t=1718920
https://www.computerbase.de/forum/showthread.php?t=1709067
https://www.computerbase.de/forum/showthread.php?t=1673863
https://www.computerbase.de/forum/showthread.php?t=1697260
https://www.computerbase.de/forum/showthread.php?t=1671330
https://www.computerbase.de/forum/showthread.php?t=1681853