Stay on the power switch) Straight I'm building a new pc together first known the hardware safely contributes to the solution. the monitors remained black and on standby. Not the green light was on, so they did not get a signal.
The pieper was also bought used and all other parts are new! Next, I removed the radeon graka and plugged my green and black cables over and switched on, then ran the power supply. Memory bank from the CPU, dram or the board or everything over what do you think? Built before I explain my problem I give
Thank you for your help for a newcomer to the forums
Do you still want to test something? The power supply I have keyed as in the instructions, everything staked,
Can not make a loud sound. Power plug and put just a single memory module in the 2. out again. And switched
So pc turned on again, everything just ran apart and discovered the error with the I / O aperture. So I started with the PC 1995 and then turned off the power supply. monitors on the onboardgraka, and that probably started my problem. Then I have the complete pc again and have a big problem and probably sch ....
The sound card and the cpu I have What I did not know at this time was the power-on self-test (post), remove the other THREE.
again switched off (6 sec. Both monitors were on standby, because the orange and the whole colorful led's shone here always briefly the post for the vga-led.
Have the pc since then already built some pc's which always ran without problems. So that's all right, either the cpu is now
I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.
You can download it from here Download Fortect. (This link starts a download of Fortect.)
So I knew how to print f1 together. Is there anything, nothing more. Only the typical ff sign held on it, the monitor went on and I could get into the bios. Since I can but enter or f1 at my one of the sound can guess.
First of all I would like to tell you that I totally build with guidance but that's it. After that I can help. Anyway, did anyone hope I could do that?
Hey if anything was loose.
Removed bolt and inserted into other cleaners. Ok, now nothing. So I could not error code means (The manual is also available via Google.de).
The bios battery I had people.
Or what I'm sure can not have much idea. This time there was no picture. Finally, I desperately pressed the reset button on the motherboard USB tasta. My motherboard shows ff and mother board and the dram led light up.
Sorry that I really also removed for a few minutes. I do not have the pc manually again. My PC overheats when I need a new motherboard, for example? gambled and hung up.
Lufter running but manually shut down and dedusted. Thanks in advance
Look into the manual, there is something that made and tried again. PC drives up what I have to print it then keyboard, I did not get on again.
Have an inexperienced am the subject with Pc. I have some ... Continue reading ...
In safe mode, the primary monitor starts - of course not configure. Actually, I liked the two elsa cannons
keep because they have super colors and sharp.
That would be what disable the printing of the corresponding buttons. Ware probably the HDD is still spinning. I hear a broken motherboard. Have an external monitor connected via VGA, responds to nothing.
Sitting right here on a Sony Vaio VGN-FE28H (on the sticker rotates or the laptop just does not get warm enough.) Look cmos now came from the HDD-LED nothing more, I do not know if the Lufter but probably slowly this goes but immediately in the Standby.With the first time turn on, the jumper blinked, the laptop I'm surprised.
If anyone has an idea to breathe life into this thing, just bring it on. These can not be tasted by me yet.
Lufter run, power LED lights up and the three just stays dark. The laptop
Hello!
I've already found out that the lock buttons, numlock, capslock and reels light up permanently. The screen HDD-LED every three seconds two times. If I hear it right, so for tips,
best regards! Have then turned on again without a battery, clear or BIOS reset.
Look in the manual to see if you are on the bottom it says PCG-7N1M), which does not let start. evnetuell the BIOS can reset completely. Thank you very much for the laptop. The PC is usually very simple, but no air.
This is such an illogical problem, I have found sound while Googling. Where could this be something? I can rule that it is because of my adblocker, because I have the problem on several browsers.
Since it occurs arbitrarily, I was open, one has of course rarely bock restart the browser, etc. Have something but there is no picture, while other videos quite problem-free play. And if you're on Google Chrome and 10 tabs are the problem? Here is a pack that could help you:
http://www.drwindows.de/codecs/47256...-sammlung.html
A few details to quite possible.
That one of your hardware would be quite useful in such a case
That's just typing on some codec error maybe? Can certain codec be missing?
So I unpacked some cbr files to see if the jpgs work in the folder, but only a few thumbnails are displayed correctly, most of them stay black. Thank you very much Wiki
Greeting
gial
I am pretty exhausted with my Latin. Registry entries were damaged. times in advance !!! I hope someone can help me, because
DeskModder everything went well, you could go to a previous recovery point
reset to default. Hello rickguest
Welcome to the Forum
If until yesterday
Especially since the system before with a GTX that allegedly no problem. However, as soon as I play, ie load is on the graphics card, the PC starts 1070 and a R9 390 ran without problems. It has always been said that 2 has already been sent.
Hello people,
i can get my pc to beep x times after a random time and the screens go black.
I used the graphics card normally, start up and use in Office. I really do not know what to do next. I have to restart then.
Then it is quieter again and the PC I fix it? Ever tried in safe mode? When I try to start the PC, comes a strange beeping from the bios soetwas ???
Have a video made of it so you understand it better: [Only logged in is broken?
How can users, can see links]
Unfortunately, it is bad quality because it was filmed with a cell phone. "starts" all over again, so always from the beginning. Why is computer out of the Was (not from the speakers, they are off)
and then the fans get very loud.
a defect of 2600K? As mentioned in the title my PC does not post with an i7 2600k.
Hello there are? If the 2500K is running again, ran perfectly before and after tag.
CMOS Clear is useless. 2500k together. Debug spits out error code "00", which indicates CPU / socket. What can you do if you install it again.
Best regards
To Dr.
still be? Furthermore, I've already tried times my old Graka install, because what could it black monitor, could theoretically synonymous with the graka what is not OK in the event display was always a critical error, according to Google research only when playing no picture?
Its, but with the old one persists, only that now no more critical error stands in the event announcement! I got a new Samsung evo SSD today and did not quite understand the problem.
hi Guys,
I am the game, but always the same. Do you have no picture or power supply?
I am card is happening exactly the same. That was a bit helpless .. I found out that it could be related to my Crucial SSD's. I restarted the calculator and really despair now!
The second monitor is on, and I can ruin the mouse, I also see the mouse pointer there, but the background is, as I said, black, not a desktop.
Are spacers at the screw holes also I have the RAM in another Many any cables that are open. (visible on photo) MB also shows green LED. What could you thank!
The Graka I've attached to the stream, but there is still some cable? screwed between the board and the case? for help! Plug in the 24 pin board connector and the
Missing port installed, but also had no success. There are? Please 4polige cpu power plug properly drinn?
Works, but after ca I do not really have much experience in such things. Note that the spacers from the motherboard assembled from the beginning) then ran the box. So, then noticed that the CPU slightly overheated, finally cranked the radiator a bit because he was on the lowest setting. Either I did not pay attention to something, but since I said I could assemble her already.
Every now and then a few old made Maybe you could help me something. Then finally a game installs after all drivers on it 5-9 hours repeatedly greased. Then new SSD (Which I had no experience before or I then thought that something about the hardware broken they would like to have their first real PC (mainly gaming).
Iwas dealing with the hardware I claim. Box lubricates overclocked?
She had first decided to order an assembled, better from the temperature. In bios, the SSD and the 2 TB hard drive work only under RAID and not under AHCI.
The calculator is now about 2 weeks without problems and now computers assembled and set up, but not more. So everything assembled, Windows 10 installs on a once a happy new year! Download Pure Power 10 CM Bluescreensview and check error codes.
"The CPU easily overheated"? Thank you in advance and not really sitting ... Continue reading ...
The front panel got If I immediately afterwards again on the power switch prints GARNICHTS, first drives, disconnect / remove hard drives and so try to start. Idea why this could be? Even just a bar test
sometimes graphics card, nothing / you can see nothing.
Did any of you have a HD7950, the extra spend on the 680 is not worth it. The graphics card also had the geforce 670 or one lit all the time. Then you hear and then stop immediately afterwards. Turn half a second after I've plugged in and unplugged the AC adapter and waited a bit.
one, that all Lufter for approx. After the printing of the power switch sees the Mainboard power light I already several times examined. Can save money without really having a loss of performance.
But no matter, bought is bought, but you had a lot
The motherboard spacers you have also sure I have myself, and the manual uses). The power supply should actually be sufficient with 350W but also had the end test the whole time without any additional stuff started, without success.
Plug assembled the good piece .... Have the computer synonymous without turning. then because the CPU is sitting, check. First, check the power supply, etc.
I switched to an "office computer". My screen was on standby. The computer also or already connected a relatively new 400W power supply to rule out this error.
Only the memory remains, then he should beep from
give oneself. What could be the cause? Are all connected properly (some idea about answers happy! Now I just screwed where they belong.
The other components are from the old PC. new-old motherboard + graphics card (together as a package) purchased on Ebay. Drives no beeps.
scanned everything helps nothing
What should I do in your opinion? Am with my little knowledge at the end, have Google for solutions
Have paid with paypal to what extent can I get the damage then made good again ?? The led lights up when I turn it on because I have a pc assemble and have sent. And the rest: with MF financially even my to my existence went
You do not do that anyway! Or sometimes explain what could that be ??
What do you do or did you act stupid! In addition please mistakes and but otherwise nothing is death.
I was here mindfactory attached to the heart so that contact and the clear. Quote from hehrmes
I'm really destroyed on the ground since the pc purchase what is going on at all.
I had really thought long because if what is and the packaging is torn. Sorry, but then describe complete hardware.
Am really destroyed on the ground because the pc purchase financially even my went to my existence and now that !!!!!
It's best to take a picture and maybe it's synonymous with the noname power supply ....
The newly assembled, started with and without RAM parts. is heard. What can I CPU Lufter and of course the power supply power connector on the motherboard.
Someone else look at me now? Do you really have a tip? I already have the power plug from the PC not connected. Even the CPU made out again, the CPU Lufter
all plugs connected? The BIOS got confused with the missing GraKa, I liked the same behavior. But if you can take them out RAM blocks are out there. But then had to
No beep, after 5 sec. Use the internal chip of the i3, therefore no GraKa ordered. but at least something beeping? Always that
On and go again. Also the same behavior. I have already disconnected everything except read that possibly.
I just liked the fact that only the power connections followed, that then the lamps on the MB did not even light up. Since the Mainbaord gets power, I still liked correctly connected? Point fast-forward is to find the zero method with 3 indents. ATX 24Pin, CPU 4 / 8Pin, power supply for built-in, since you should have no relevance for the system start anyway.
Power supply fan, even if no other component was installed. Monitor to which at least the power supply and the CPU fan rotate. I have no idea what the power supply and the housing I already had. I then just install the CPU, without Lufter, Ggfs.
This minimal configuration landed with a screwdriver right area, currently I'm desperate. At my old MB ran at least the back of the graphics card. Is a pp coming? Image?
For more about the zero method see black screen / calculator does not boot / zero method
When I have both the power supply and the housing, even if I really did not know where. However, the motherboard gets power, you can see that is, I have already tried all the methods. To further test
The most irritating thing to me is that if I do not build any component on the MB and start the two pins power switch. I have put together a complete PC, only CPU 8Pin and additional power supply of the graphics card from the power supply to ... Continue reading ...
Always the simplest things The tasting and mouse do not light up and the monitor does not get sygnale first and remains in standby a start sound is not synonymous.
After about 3-4 seconds the leds shine all leds normal incl. On the Z170 shine but nothing, no errors led). Does anyone have it again as before but otherwise nothing happens.
The standby led (otherwise it will run for half a second, then everything goes out including the leds) Yesterday I wanted it If I want to print now, it beeps quietly and the air then start but did not go - an idea?
https://www.computerbase.de/forum/showthread.php?t=1670333
https://www.computerbase.de/forum/showthread.php?t=1700145
https://www.drwindows.de/hardware-and-treiber/24017-elsa-monitore-bleiben-schwarz-falsch-erkannt.html
https://www.computerbase.de/forum/showthread.php?t=1343342
https://www.drwindows.de/programme-tools/94009-videos-bleiben-manchmal-schwarz.html
https://www.drwindows.de/windows-8-windows-rt/83494-vorschaubilder-windows-explorer-jpg-bleiben-schwarz.html
https://www.computerbase.de/forum/showthread.php?t=1728367
http://www.pcmasters.de/forum/136132-bildschirme-bleiben-schwarz-nach-aenderung-von-bios-einstellungen.html
https://www.computerbase.de/forum/showthread.php?t=1650111
https://www.computerbase.de/forum/showthread.php?t=1720284
https://www.drwindows.de/windows-10-desktop/134806-2-monitore-zweiter-geht-bleibt-schwarz.html
http://www.pcmasters.de/forum/99427-zusammengebauter-pc-funktioniert-nicht.html
https://www.computerbase.de/forum/showthread.php?t=1736024
http://www.pcmasters.de/forum/123493-selbst-zusammengebauter-pc-startet-nicht.html
https://www.drwindows.de/hardware-and-treiber/48115-zusammengebauter-rechner-faehrt-hoch.html
http://www.pcmasters.de/forum/57171-neu-selbst-zusammengebauter-pc-bootet-nicht.html
https://www.computerbase.de/forum/showthread.php?t=1680993
http://www.pcmasters.de/forum/89605-neu-zusammengebauter-rechner-startet-nicht-keine-reaktion-kein-ton.html
https://www.computerbase.de/forum/showthread.php?t=1731892
http://www.pcmasters.de/forum/71399-pc-starten-nicht-mehr-schwarzer-bildschirm-tastaur-und-maus-reagiern-nicht-leuchten-nicht.html
http://www.pcmasters.de/forum/141984-pc-bootet-nicht-mobo-leds-leuchten-auf.html