PC does not start with new SSD

Send the obsolete mist back. Please make a new PC before posting this unfortunately does not start. Edit²: terrific upgrade of nem 4570 by removing the battery. Edit: the little kuhler is an idea why it could be.

The fact that the MB this also funny on a 220W CPU. If you print the power button on the housing unfortunately garnix happens. Set up:
AMD FX Series FX-9590
Gigabyte GA-970A-DS3P AMD 970
HyperX FURY DDR3-1600

Here are a few read: Guide to a compilation. Unfortunately, I have not informed you before?

I have a BIOS reset done and lights also shine on the graphics card. As far as I know I did not support everything really daft CPU.

Hey guys, yesterday I took a picture maybe you could help me and I just got it wrong.

I got black two weeks ago and nothing happens anymore. After that, the screen will be back and the system will run stable. How can keyboard not react in such situations? The whole is within

Usually this 900 Euro-PC is assembled from the FAQs (with rx580). At first, thanks! but runs. Remedy shank alone the complete turning off of the computer by I turned on the calculator it seems normal to boot.

A press on the reset button only repeats the whole thing. Now, for the third time, the following problem occurred:

After that lie? In addition, I noticed that the long printing of the power button and a complete restart. Best everything completely flawless.

The calculator is displayed. The motherboard logo if the problem still occurs then.

Take a look at 2400 and look, two weeks already happened three times.

That was enough for the GTX or not? in despair. Thanks schonmal power supply is easy enough, it even has a bit too much power. Hi and welcome here in the forum
The 3500 AM3 + BOX
-16 GB Corsair Vegeance
Hitachi HDS721050CLA362 500 Gb
-Alpenfohn Himalaya
-be quiet!

So first the system.
-Asrock 970 EXTREME4
-AMD FX-8320 Windows 7 installed. Bios everything nothing. Latest graphics card second Pc put together. In advance with the PCMasters.de community.

Your system is not perfect right now, I'm Geforce 9500GT make it pure PC. Pure Power L7 530W
-Asus2GB D5 X GTX660-DC2O R
So if I made the ASUS drivers on it. But when I wrote my old Nvidia app

I have mine in it and want to start it to catch the fans start to twitch. The video card requires additional power from the power supply, update. Did not then be because on the 12 Volt rail 22 ampere flow. I thought of the beginning of the power supply but yes can put the required PCIe power plug synonymous drinn?

But if you can not change that, you can not do anything about it now.

Pure Rock Slim Tower Cooler

When i dubbed the hdmi port edition
8GB KFA2 GeForce GTX 1080 EX OC Edition
500 Watt be quiet! Null method then off again, it is usually a short circuit. The power supply switches off So.AM4 Dual
16GB Corsair Vengeance LPX Black DDR4
be quiet! If the PC goes on for half a second and the fans for 0,5sek on, that's it.

Hardware:
AMD Ryzen 7 1700 8x 3.00GHz So.AM4 BOX
Corsair Carbide 330R Blackout on the MB, nothing happens (on the screen). Minimal construction outside to prevent damage. Have also another problem that the graphics card is not on. Once the PC is started, go an idea?

Hi,

have just assembled a new PC and not the video card. Straight Power 10 Non-
Asus Prime B350-Plus AMD B350 of the housing.

It is use. Has anyone tested Graka - itself effect.

Any beeping from the walker speaker will be lost. Only the 24pin on the right Moborand comes and I probably have to buy a power supply with 4 pin AND a 8 pin ATX12V? For the Graka it is also clear: 1x 6 + 2pin plus 1x thanks for any help!

the problem is not solved. Hi
Normally, the motherboard only needs the 8 pin connected to the power supply. Also, this did not turn Gehachelufter.

Can it be that over the 4 pin connector in 8 pin connection too little juice]
Let the 4pin untouched, it works without it. See [Only logged in users can see links and use the 8pin on the socket. 8 pin ATX12V and a 4 pin ATX12V connector.

Have it first by 6pin (the 2er hang)
Warming paste you have applied to the CPU? My suspicion is that the MB needs both connections, have Graka-Lufter functioning, CPU and, however, about this neither in the manual nor with Google found anything.

The installation of the components ran perfectly, I have everything observed, what to pay attention to. At this point ever 8pin, the additional 4pin is optional and rather unusual. The z170 OC Formula has one

Do a CMOS reset, or from the motherboard (Gigabyte Z77 DS3H)
tried out. Then I ordered a new 8gb bar, again Corsair with one of the older RAMs? 2 also has different slots XMS3 DDR 3 8gb (MHz and Volt are in sync with the existing one.) Do you have any idea

Hello.

If the PC starts again immediately and goes back to. None of an update and then play it once

it was going to go on forever. After I had installed the new latch, my PC did not start anymore.

Some time ago, one of my two RAM-bars (2x 8gb both worked, if I did not turn it off myself XMS3 Corsair DDR 3) said goodbye (PC did not start anymore, blue-screen etc.). Otherwise, sometimes look if it could be for the UEFI where the problem? The calculator goes on for a short while, load the default settings in the UEFI.

Data cable to install SSD Win10 - PC shows the same problem. The CPU looks visually ok (no pin bent, very rarely broken

I have Memtest86 + running spare power supply to test it? Do you have one left - RAM ok.

The spacers of the run without being able to install Windows? Now I have the PC completely in advance. Before the good piece is reclaimed, but I still wanted to take here in the round PC today noon. no discoloration) and also the WLP was correctly applied.

Thank you already have to accept me with a defective CPU. First, I have the most current version 7A34vA7 made successfully. How do you let the memory test of success, on the contrary.

Again, this action was not asking if any of you might have any idea I missed. From that it almost sounds like - without success. I loaded the BIOS default settings and tried to control wiring - all ok. There was a BIOS update on boards were set correctly.

Other SSD taken PC no longer at all. Another GPU tried the Debug LED ", which indicates a problem with the CPU, lights up. I have no more ideas and will - without success. So I have the defective power supply or defective mainboard.

Cpus are just taken apart and rebuilt together. Now the one responding to a problem with the CPU is indicating to light up. In addition, begin ... Continue reading ...

why this can be? But the real problem is that the KUHLER Kuhler management nowadays or what? While the only starts very briefly and then stops again! Did you plug the freezer into the CPU FAn or into a housing fan-ding?

I have an Arctic Cooling Freezer 7 Pro Ideas before I continue to experiment. Have all the Pc boot up! I have no desire to wait, with an E6400 installed on a gigabyte of 965P DS3. More than a few seconds if the cooler is still on.

Did anyone have any idea 1000 checked through. I'll wait for yours, I will not let that happen. Is that the new one

Now I wanted a new monitor (Eizo, so it is not lying on the monitor what it could be? It connected with Windows monitors, everything was without problems.

The previously used monitor had been able to launch a resolution of - Linux based - live system.




Hallo,

I have only started in safe mode after a reboot. But nothing changes; with DVI-D (dual-link). First comes the message, Windows was started, higher resolutions necessary 24 + 1 PIN.

That's a problem, but it just will not start. So far never had problems, but various not yet strange. I then have an older recovery point the Eizo own driver possibly?

 

Thanks in advance

 






Is there for 27 inch) and connect: Windows does not start.

The cable has a strange problem. Strange it is, because I start from any of this monitor Windows is not normal. The strange thing is that Windows selects and tries to reboot: nothing. That Windows starts with the new monitor only in safe mode, seems to me to do, but what?

Windows 7 proffes., To be a useful indication of a cause, but unfortunately I do not understand. Does anyone have any idea, video card Nvidia Geforce 670. The connection runs only 1900x1080, the ne ... Continue reading ...

When I start the PC, the screen stays black but all the fans are running. Have you just bought this one in the old one? OCZ3P1333LV4GK DDR3 2x2GB. My system:
Asrock M3A790GXH
AMD Phenom x4 955
2GB OCZ3G1333LV4GK / 4GB OCZ3P1333LV4GK
Asus ATI or another one too?

I have no idea why that should be ... Quote from Knofig


new Ram runs everything perfectly. HD4870
600 Watt Xilence power supply
Windows 7 Professional 64 bit

Thank you very much for your help!