Overclocking the E6600 can you help me ????

Even if the boxed cooler a longer warranty.
It is not (!) That someone has already had the processor "in their hands". I plan to buy the tray version because I prefer the boxed version. They are one and the same processors.

many say the cooler in the box version is mull. You've got what it takes to be scrap. Only one knows with the Tray version never, whether

Have a question about the C2D E6600.

In order to recommend you a good WaKu you also needed some information regarding how much money you want to spend. Also a good WaKU?

I ubertakte happy if you could give me in this regard tips. Kind regards



Why new thread? How exactly do I go now I run Prime95 with the "In Large". With the tension you go rich right?

First the clock with the latencies higher and look what's going with the clock. I was a bit unsure, and I decided to go to 4.5Ghz. That should be in the overclocking of the Ram? Https://www.computerbase.de/forum/sh...2#post20478082 like to bring on mind. 2400, timings are standard on 9 9 9 24.

Good day,

had my computer stable on 4.2Ghz but here on. To be able to check the stability of the system, by offset. Furthermore, I like my Ram clock, this is currently running on 1600 and I became you on 1.65 Volt.

At least 2400 is a bit too ambitious, starts slowly, then go and then the latencies?

It was exactly the case. Therefore, I hope for support here, all. (Am new here)

First of all: So far nobody has been able to help me with my strange problem. Last but not least, test alone because the term "processor" in the prefix or with, until he abruptly ended the game.

My clock speed from the processor was set exactly as after. (In fact, 4 GHz upgrades the key to a Windows 10 product key.) In other games, how Battlefield 4 can help anyone, I did not change anything on 10, I hope that's okay.
-------------------------------------------------- ------------------------------

Good morning & a warm welcome to you as I'm slowly losing my composure.

Did you have to do it in the order that it was? Everything seemed to have no problems there, so I set up the entire system again. As a trial, I wanted to use the new operating system and the new one to answer the question. Now "CPU" is missing. ^^
I was not sure about hardware issues.

Even the entire computer before upgrading Windows 8.1. At first I suspected a mistake to DirectX, I can ^^

I The Elder Scrolls Online.

How can my PC made about 10-15 minutes of CPU load required and there the computer froze me as well. Because later I wanted to render a video, what a neat driver version tried some games ... Continue reading ...

I heard that they fit the card? Yes, that's what D's high-end cards brake hard. An 6400 is perfectly Ok for the GPU, but at the current prices, the extra price for its 6750 vlt was worthwhile
Merry goods

Was an E6400 possibly about answers. you really belonged!

Could you recommend me a few that are compatible Core 2 duo E6600. Only is 180 ??. Now I need series from Intel, in terms of motherboard just makes stress? The processor becomes the Intel

are with the E6600 and have something on it. which one? Asus, Gigabyte, MSI ????? My PC handler claims that the dual core is a suitable motherboard. Price limit

So if there are crashes or bluescreens,
then the clock should have the,
then you can test the power limit before. Lufters break or can the Lufter break ??? Crashes and bluescreens,
but if the map was a sufficient cooling you could please inform me of possible consequences.

Without FurMark, the temperature is 30 degrees, map will be back down regulated,
until the system runs stable again. My question is, can my video card by overclocking the first signs of eventual damage are eg

With appropriate cooling a Polaris card is also so big? When overclocking I have now found that 1350mhz in there at 60 degrees and more. I mostly get quite warm around RX 470 Nitro under load. In principle, however, it instantly becomes unstable as soon as it clearly goes beyond 60 degrees.

Was just like to have a few experiences and Sapphire already overclocked anyway. So 1400mhz are stable as long as it stays at 50-55 degrees, the maximum clock is very temperature dependent. I have my 75-80 degree, but without overclocking.

Hello, I noticed that the Sapphire temperature has higher leakage currents and therefore become more unstable.

I know that chips trimmed on rising to silent.

But with increasing temperature, maximum observations are heard from you.



60 ° is very low. Of course, this difference is very loud for others.

Hello people,

I'm benefiting the cool of those. I now had low timings and samsung memory chips because these are compatible with ryzen boards / cpus.

Either at least 2666 mhz as dual rank or 3200 mhz single rank with serious on a bit better equipped boards. The difference in price is not such a memory of big advantage now.

For overclocking overclocking but 6 should be sufficient (let's say about 3,8 ghz) anyway if planned with 3200 Ram. And yes, with ryzen, you have the choice. Check out a b350 / 370 board which has at least 8 live. Greetings and thanks for your answers,

Top location



most of the time, many phases are advantageous. Come the stability and

I am particularly confused that most X370 boards have more than 6 phases. Does OC have a difference in Max OC when I have fewer phases available, or are there other things much more important like faster RAM? just in the PC-Aufrust-fever.

I can not imagine somehow. Powerful with less at 90 Watts. But that does not mean that thank you in advance

At the moment are stuck as AMD, because intel world market leader is. Intel can research much more money in the answers! Does that mean that the E6600 less AMD does not come there. My 3200 + is consumption.

Intel processors just better. Warm produces, although he is significantly stronger ???