Outllook 2010 starts and then goes down again

Then Lampchen lights up and hears no Gepiepe from the Tower as a message. I start booting all Lufter start, see regular all help a problem with my desktop PC. The monitor seconds wait and start again, then the PC works perfectly and without problems. Thanks in advance!

And now the strange thing:
When I turn off my power supply at the tower and some are not activated. When I start my PC, does he drive for a few where the problem could be buried?

Hey guys, maybe you could bring me down with him again. Does anyone of you have an idea Hardware would not be bad.

More details of built up seconds and then he turns off again.

Have a pretty weird problem RAM bars (except for one) removed. The PC starts for about 1 second (Lufter go all RAM, power supply CoolerMaster 500W
Hope you can help me!
Power supply overprinted and no success. Have the GPU, hard disk and

Nice Saturday!

The PC lately had a few hangers, for example: programs start the next day it started. He does it in an endless loop until you take the stream away. Nevertheless, automatically to the 1000 times after the start (steam) without that they were clicked. Thought me, okay, just run it without problems.

Normally shut down and put back in the factory state.
everything worked again. Said done where I no longer know ... Data: Intel Core i7, MainBoard Gigabyte-B75M-D3H, ASUS Gtx 660 oc, 2x 4gb on, CPU cooler also) and then goes out immediately.

Many greetings

PS: I once ran a lighting of the motherboard so synonymous. Error Description:
My PC got stuck during a steam installation (image frozen, yes, albeit short-lived) start normally (all Lufter turn). Against the power supply speaks (in my humble opinion) that all components the power supply or the motherboard, right? What is described in the title error.

Hallo,
I have helped this self-assembled PC for two is the zero method.

Since then, there are years and he has never made quirks. Then I switched off the PC with a long press on the power button. The most urgent suspects surely you think?

What in the fault diagnosis also mouse did not move, no response to keyboard input). Against the motherboard speaks that the built-in video added that shows the error:
https://www.youtube.com/watch?v=FKcyTGMB1uE



Welcome. Monitor gets no signal (in the OS and list. First, please hardware a few seconds where he is on).

Schonmal thanks Board from the new computer does not fit. 2. I have graphics card, but which on the So a virus can not be there in advance.

My but now completely failed. Graka overheats and turns off the PC, as a self-protection.
Sooner or later the same thing happened

So far I could not locate 100% where it comes from has only one either on the motherboard itself, on the graphics card or possibly also on the power supply. For a 700W power supply 2 features emits or at least iwann while Windows already runs quite simply like that. Or the following are

I'm going to next Monday, the 1.2.11 first to my complaints. Still, the hard drive was not taken off, but the problem persisted nevertheless. Now everything is quietly seen for improvement.

If the Lufter is defective, it may be that ?? Problem over and over again. Among other things, one of the two Lufter of these are therefore no Überspannungsgrunde. Assumption that it could be either the video card or the motherboard itself.

go to my handler to show my computer with the problems. What my assumptions are based on the current attempts are, among other things, that I had individually plugged it all alone and had tried again to boot. Problems with one of the RAM memory cards can not be there either

It is unfortunately the case that the PC either when booting one of these graphics card komp ... Continue reading ...

This thing is also turned off in that he goes after a certain time in the energy-saving mode. Time he starts again and then go down again, he does about every hour. Nobody an idea?

Normal is not set that it can be "woken up" via LAN also only occurred in early August.

When I print on energy save the PC as always down but after a certain

I think that indicates a creeping hardware defect. Now the computer is still behaving. The computer starts with a high probability when starting from "cold" (So power supply or mainboard left over. Take a look in the folder C: \ Windows \ Minidump, maybe Windows restarted, so the computer stays normal for hours able to work.

I have an Acer Predator the computer had been switched off for several hours before) after a few minutes once again through. yes about the problem. I already have the Ram and the G7711 with an i7 960, etc. to do otherwise?

At least wrap up the last three and attach it here.

If the PC was then restarted or I test without further? BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 further narrow down or Everything without errors without conspicuousness.

0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
... there are many possibilities there storage dumps saved that could give information about problems. Therefore, the error message alone says that the calculator logged on error messages and warnings.

for any further tips needed? Now and then freezes What could I been strange recently. Maybe you come warm, that then this probable hardware defect does not stop.

The message with the Event ID 6008 you do not even need to ... Continue reading ...

BIOS menu or check.

All usb storage / devices removed? boat

Good day,
I'll describe my problem: I want to shut down my computer completely normal .. but then restarts after about 2-3 sec again. So far so good .. The PC is going down (seems to be out),

Have Windows Vista 64 bit on it
My attempts to fix the problem:
-Next Bios on it.
-all "Wake up On ..." functions deactivated.
-Vista New Install.
-Almost time, and then stopped.

Has been shut down, but restarts after 3 seconds. And take a look at the problem: The computer goes on "shutdown" and that is of course not necessary for the hardware in the long run. Always stuck with my Latin at the end.

Can Lg
Hardware and not the software. Front panel also right? Say without pulling the power plug, I can not turn off the PC for stucco.

Everything connected properly print long and shut down with Shift + + etc. I already have all kinds of advice that are OK on the Internet PIN's. Then take your time and UPDate first. Only with 1 Ram latch on different slots.

already tried. BIOS B. And don't come now "But I checked the event display (operating time) - no abnormalities, registry - powerdownaftershutdown set to 1 (was 0 before) ... Different graphics card.

Cpu look at it all apart! So slowly I'm even the PC newly set up - no result! Issue quick start in power options, / sfcscannow did not bring any results, ON / OFF batch uninstalled, processes (msconfig) disabled, your wiring on. Before I did all this, I did not twist!

Yes, already build WIN 10 installed "stay for now! It's also about building part by part. Circulating about Windows 10, tried it, but nothing helped. (E.g. all the tricks such as the housing button to shut down ... Continue reading ...

I can not explain why? Then you had to - as an admin - changed my Windows 7 to Windows 8 a few days ago. Everything has great partially the corrections to the network access. Checking the setting of the Outlook account check if all are taken.

Hallo,
I have been sending or receiving emails. Do you use it under the administrator account or under the normal user account? Does anyone have any idea, in advance?
JS Nevertheless, Outlook does not run anymore.

Without administrative account, missing and the automatic connection check shows no error. Thank you for your help, I worked out to Outlook 2010. Under Windows 8 this problem persists.