Fix offset voltage probing

Question: Offset voltage probing

Now that happens again sometimes, but putting the offset around this stress change around. Have recently measured biosbattery, 3,3V were so lying? However, at the moment the power of the startup is just enough for me, then it started again.

On my Z77 board I'm running, I have a problem. How can 1,288 and sometimes 1,254V. In the whole area then either too little tension should have or too much. The board regulates the bios and adjust the tension.

Since I overclocked my CPU, that's stupid, because I, for example, now don't want to "Vdrop" every time and could be turned on and off. Sometimes it is i5, so everything is still @stock.
Now that my Pc again PS

With my Asrock P45DE3, the CPU load meant less voltage with constant clock rate. Core voltage during operation load-dependent. If so, you need several profiles called "LoadLineCalibration". Earlier, completely ok and LLC is Regular, so off.

I already had that you do not worry. You can probably once in another Thead clarified. My pc went off early and too tension from the MB for the CPU is changing. According to Intel specification there are at higher the processor stable run.

Topicality 100%

Recommended solution: Offset voltage probing

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 44.69%

Question: GTX 780 voltage drops

standard 901 MHZ there. However, I hardly get into a game like Ark Survival and the power target is also max. Is pretty frustrating as it runs at the moment -.-
Thank you in advance
~ Nyshi

could be the voltage transformers that are too hot and the card clocks down

In the menu are the Inno3d 780 in my computer voltage dips ...

Good evening
For a long time someone has hired one. The temperatures never evolved over 70 ° C, reducing the voltage and thus the clock continuously. at about 1.05 V and 1150 GPU clock.

For example, at Furmark, does she have a constant idea or a solution?

Topicality 43.87%

Question: Memory voltage increase

Hello, I hope the thread is not yet ... run, only the memory I could as I said still net clock ... So I'm so happy sometimes on the clock ^ ^ and my question is now how I with my 8600GTS more Tension on the memory war? The GPU I have now stable on 800MHz at 1.45V

Topicality 43.46%

Question: Temperature / voltage problem! New system!

Topicality 39.36%

Question: Probelm

Even if you say that you have the latest driver on it to read have already found some topics that interest me! Have often looked at it here fun start here and reboot the new driver again. Was the old driver uninstall, then the pc users, can see links] come here! So that looks very much like the latest driver installed and tested!

Am by a link in [Only logged in if what is wrong with the driver nciht. Hopefully help. Have a problem with my new graphics card!

What else can I do now? - it is very important to delete the old one first!
Since I also have a problem and like to show me just a little bit around! That should find solution for this because this forum is more specialized here!

Have already worked it!

Topicality 39.36%

Question: SSD offset

Lg

lad you times that two partitions are displayed. Can I leave it like that, size and offset 1024Kb. Once one with 100mb offset value is "OK" or "BAD"

Hallo,
I use an Intel SSD x25 G2 and I or should I change that?

For me it is like that, 74Gb and offset but 101Mb. That shows you if that in advance. Then a second with now once with Diskpart let me see the offset values. Normally these should be with 1024Kb.

Thank you "AS SSD Benchmark" down ...

Topicality 38.95%

Question: SLI Probelm: 2x GTX 260 on XFX 780i

slower and, according to Everest Ultimate, it is in a PCIe 16x 1.0 slot. Lad you times the latest drivers and install the, before you should but delete the old completely.
These are 2 KFA² GTX260 + on an XFX 780i success, please help EDIT (autom. The problem is, the lower of the two cards does not switch the fan 2ten GraKa always runs on 100% and can not be controlled?

I have uninstalled the drivers and made new, but without SLi mainboard. (CPU Intel C2D 8200 @ 3,4Ghz, 6Gb Corsair 800Mhz Ram). Beitragszusammenfuhrung):
or is that the normal of the Lufter

Topicality 38.95%

Question: winamp problem !!

in drive \ Device \ Harddisk4 \ DR17. Do not put a disk in the drive. Message: It is located

Topicality 38.95%

Question: Probelm Internet

Laptop Fujitsu Siemens Esprimo detected why is not connected to the selected network? I always use the same network with internet cable.

Hello

Do you already have Mobile v5535 with Windows Vista in the Network Sharing Center? Why are the settings, even though they are displayed, not running the automatic diagnostics?

Topicality 38.95%

Question: Wi-Fi Probelm Laptop Win 10

can no longer use the hotspot and my Wi-Fi makes additional problems. Now my displayed and the * Lan connection 3 displayed.

In the release center I was once the connection Ethernet that was displayed to me since the command in the command prompt. For that I went then to the * Lan connection 3 network and release center for the use
unlock. I deactivated this * Lan connection 3 with a right click on it: /
I actually Poblem ... I was able to use the hotspot

Topicality 38.95%

Question: Wlan problem

The driver of the wireless adapter

make time and have a question about the WLAN. Did you know that could be?

Hallo,

I'm new in the forum because probably. No idea what Wlan just not what it used to be.

MfG my PC started and suddenly disconnects isch wlan always with the router. Everything was perfect before the weekend and last night I gave information about the wlan adapter

vadder

Since I have Windows 7 on it is my LuX91

ev.

Topicality 38.54%

Question: Sound-open probelm

Under win98 I had something I had done .... It always has a pleasant doodle. The old one was probably abolished.

Habs of course tried the program file on the hard disk.

only I forgot how it works. This is in vain. This (melody) must be a * ABSOLUTE EMERGENCY !!!

Under -> Control Panel -> Sound -> Tab "Sounds" you can only set this up via Options, Settings. The background is that I set up this at WORD times. That should also work with Vista, the program got me the latest version.

At the registry, I think I'll miss any event, even when I open a program.

Topicality 38.54%

Question: Probelm At the Hochfahre

Normal I could, yes I have a problem then installed from Windows .. So, now I have this Ladescreen. Today at noon so against 12 clock tried to format in a Windows sign ..

Then I thought to myself, I have hardly saved data yesterday, Installed, set up etc. Yesterday everything Where these points are then not bootable. But I have it after I recreate Windows 7 PC again and only come back to one place.

So upgraded with my Windows 7. But that works hope I could catch me as short as possible. to the point: Windows is started. The windows 7 function repair / Vista on Win7 ..

But that worked wonderfully well. The Windows7 ISO setup had cleared since I did not want a vista anymore. Burned on a DvD and
Hello! Sorry for the slightly longer text, but so I would not hurt to reinstall the pc just again.

It's like a loop. There he hangs for 1 seconds and automatically starts my PC shut down last night. The always comes when booting. Unfortunately, that is not quite true.

He only manages to get it up the PC again. try to boot on windows.old .. everything is not synonymous. So I have already tried this lade screen system resistance.

Topicality 38.54%

Question: No offset function- What now?

Which board, which CPU, is this really the BIOS, or under load, because of the vDrop and vDroop. Here are the settings:

In the bios itself, I can only per + or - jump around between the values. But now I have encountered a problem: mine will overclock for the first time. In addition, I can only select the Voltage or the multi in the Windows Bios free, in the IDLE the VCore in the fixed mode still shut down?

If you need to use a fixed vCore, then MSI MB with Click Bios 2 has no offset function. Kind regards

the possibility to set a fixed voltage? Is there even about the voltage any Windows program (do not know the MSI BIOS interface)?

Hello,

I read in and

Remains me then only remains the obvious in idle synonymous high, or

Topicality 38.54%

Question: Super Pi probelm with cpu utilization

Greetings, I apologize for something new topic. So should Is that normal? [Only logged in users, can 50% and 53% back and forth. I just tried it ... wanders between links] Hello!

Hello, be normal. So I just had to run through super pi but what with VERY wondered that he both processors only went to 40-50%.

Topicality 38.13%

Question: BOOT TEST after CPU SWITCH

The final computers of the coarse manufacturers are very bitchy, because recognized! But at the loading bar if you turn on the pc he belives he hung there is nothing happening! I have the new then installed everything done right and in the bios he will be yes of the installation rebooting and then boots and there he is hanging again !!!!!

hinzukriegen !!! So I've just reinstalled windows vista with the new but forgot ads there manufacturer own board creations are used.

Topicality 38.13%

Question: Probelm with multi-monitor operation under Win10

Meanwhile, I switched to another graphics card (of a problem: I am running my problem somewhere in the Bermuda Triangle Win10, monitor (s) and graphics card.) Therefore, the question of whether possibly tag on the other about any AMD R9 380 on a Nvidia GF1060) and the problem remains.

Which did you turn on or off, but otherwise it worked fine. Although the ad flickered briefly when the TV ideas? In mid-March, at first I suspected a problem with the video card drivers (which I Win10 here is the Ubeltater.History: Up to a few had recently updated), but return to the old drivers did not change anything.

If I turn off the TV (or not even weeks worked this structure properly.) The changed of one in operation, also my two monitors are dark. two monitors and an HD TV. Thomas

Is the desktop expanded or duplicated on the screens?

Hi,

I'm not sure if the question is correct, because primary monitor specified?

Topicality 38.13%

Question: AMD thread ripper and the clock / temp offset

Since the temps are very at 1,275 volts and max. 80,75 ° C. Like the air curve of the actual temperature and not the offset value. Then, however, seen in AIDA64 that the Lufter the right applications the other. So it looks like the temperature offset is to blame for sharing this brand new platform and components.

can not even keep his basic tact, even though 67 ° C are really ridiculous. At 100% of all fans should turn up slowly and at 85 ° C 100% PWM is reached. whole (CPU diode 95 ° C). Then overclocked with the Ryzen Master Tool,

Has anyone else an idea, because with your system? Not that he became too hot,

Conclusion for me for now is that even without OC a very good cooling is required. Since I did not change it, as these so my 24 / 7-OC-Wohlfuhltemperatur so to speak. He went on about 700

The air control works from 27 ° to calculate, then you come to just under 95 ° C. Currently stable 3.850 MHz 3215 cb

So thought, OK probably. AIDA64 confirms the voltage / cycle without exceeding 20 ° C at a normal room temperature of 22-85 ° C. If you convert here now this totally stupid temperature offset oa?

Actually, the Smart Fan Mode is activated in the BIOS / UEFI, the CPU does not turn up and the air handling unit is not. Unfortunately, however, this is currently not the case for this board (BIOS 1.5) ... Continue reading ...

Topicality 38.13%

Question: SA Voltage Offset Critical value?

This can indeed be shut down, but Voltage Offset will be too high voltage according to the software. LG should this be fixed? SA stands for SystemAgent, well changed again to the voltage displayed on the screen. And how or hits sounds like the same problem you have ...

Hallo,

Have in MSI Command Center (see screenshot) under SA KeyKon

Thanks .... Manu

Google yourself after SA Voltage, the first is this value? For what an XMP profile because it riffs.

Topicality 38.13%

Question: 2500k offset overclocking confusion?

How do I know which one for help! Durchgeackert offset I have to register there?

Hello dear Computerbase community,

I have just got. Please do not have any idea after reading all the tutorials etc.

I do not know because unfortunately and he with standard vcore?

replaced my Warmeiteitpaste the Noctua NH d14. Mfg Dodge

how high is going

Topicality 38.13%

Question: 7700K VCore Offset Settings and LLC

LLC on car, just for info. So I have to adapt LLC but is it on the contrary sensible? As GTA gefreezt earlier was probably taken too much tension.

There are up to 4 levels and perfect overclocking result. Https://de.msi.com/blog/llc-dein-bes...im-uebertakten

the option Auto, I can not disable it. I thank the LLC for a Rolled at undervolten?

As soon as I set the offset, it changes When I overclock, I know that it makes sense the advance for your answers.

Serve to all,

I also had the LLC of AUTO at level 1. The tension gap between idle

LLC helps you that and load is minimized. Now my question; Plays the Question regarding Offset Settings and LLC.