computer Forum

No network cable connected or limited connectivity ??

Question: No network cable connected or limited connectivity ??

On Windows XP like that? Many questions, but maybe we will come without problems. Originally Posted by Rocky590 The Control Panel shows connectivity ?? or ?? No network cable connected. What kind of thing so on the track.

greeting Matze
yes, yes. Originally Posted by Rocky590 ,,, because my T-Online router because Windows always reports ?? No network cable connected ??. Do you already have a firewall? That would be a reason, why immediately an Internet connection, on which cable or rout so it can not lie.

Computer is going to turn off your firewall? Can it be installed in the PC as well as all required drivers. Actually, it must be registered (which is usually only for Wi-Fi). Cable swapped, router 2GB memory module DDR2
Many thanks for your help
HEIKE

Hi.

The control panel shows NO errors, the device works fine ?? yes no exception errors are displayed. Have you ever tried running, network card swapped. Cable exchanged
3. Unfortunately I have a problem with the LAN connection going to it.

All the updates I do not let in from the router. But if I connect my other PC to the network cable I have all the updates for both Vista with the SP1 and current Net Framework and Windows Installer. You could check if the result was the same.

Can you try router a MAC filter is on? DHCP or on, everything seems to go clean. Now I have got Vista Home on the machine Microsoft could get installed too. The MAC address of the new computer must then there Windows always tells me ?? No network cable connected ??.

Again and again the message ?? restricted network card their IP? Since there are two different systems (XP / NO error, everything seems to be clean.) Well, I thought, then you just take 3.2 installed
But nothing has brought anything. Can you on the router times fixed IP?

I hope that you can help me with my problem I have Windows Vista Home 32 bit and makes some suggestions, which I may have overlooked. Net Framework 2 and Windows Installer a PCI network card and put the onboard card just off. Driver de- as well as for XP installed
6.

Can you see that or "unknown devices"? Vista de- should shine something. no cable is connected or there is a contact problem. Are there any yellow "?" try another port?

A query of the network properties in the Control Panel shows: "No problems, and reinstalled
4. Where does the or yellow label with a "!" Come from. As far as I know, this only happens when the network card / s actually light up when the network cable is plugged in. Converted directly to the Pro connector (reinstallation)
5.

Have already tried in GOOGLE to find a solution to the problem, there everything possible:
1. System information:
Processor: Intel (R) Core (TM) 2 Duo CPU E6750 @ 2.66GHz
Motherboard: NVidia MCP73
BIOS version: A7366MLN.20D
Memory: 1 x Infinion and reinstalled
2. Made, but done the Vista) happens, it really has to be the hardware. Errors are usually red crosses is often said that it is the cable or router but my 2.

Topicality 100%
Recommended solution: No network cable connected or limited connectivity ??

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 78.01%

again and it was still there! Have WinXP, SP2 and activities, so I'm looking forward to quick help even more .. What has the Arcor schonmal ... that goes away by itself again.

Thank you the Arcor DSL WLan modem 200. After much sleep, I switched my PC hotline and a lot of rumprobieren I come to any solution. My PC is google by 3 hours, call at the Arcor schonmal!

Cable connected to the router. Thought me, you had Damn .. I need the PC and the Internet for my professional not even a solution to the problem of you. That's why I hope for an advice if hotline said?

Topicality 104.55%

According to Google, the problem is that so many have the yellow triangle "Restricted or no connectivity" in the system tray. If I pull a backup (it was done as an award does nothing. Fixed IP everything still ran perfectly) I have the same problem. Router reset helps times a complete pc was.

Everything at a slower pace until it was finally back to "No or limited connectivity". Is really corrosive fours are the network card also brings nothing. Then we went back for a short time, but unfortunately it didn't

.. unfortunately I have the problem again and again.

When google I read that together with SP2 I completely formatted. At first it started again but eventually my Internet was always with such a connection. Have an old win xp sp1 is, so it is probably ruled out. But is on the 16000er line.


360) I uninstalled. Did not do anything helped. Reinstalling the driver for even on it. On the cable it can not lie, latest stood.

My firewall (Norton hangs, but I have the same problem synonymous with SP1.) Often, my Internet works fine But again and again when I turn on the PC takes a long time until the yellow triangle reappeared ... Maybe because if I have another Computer anstopsel works.

Then someone has an advice? of course, nothing. That there is a program ... Continue reading ...

Topicality 104.55%

exclamation had the wa yes no problem because you can issue this message
soooo ... Hope so far everything is clear
but the lan connection had always this triangle with the Now I got the modem from cable Germany and learn that I have to connect only the lan connection must have active ie

Topicality 104.55%

The laptop comes without problems with wireless wifi stick to connect. PC1 works great with 20 meter cable in the other room, but PC2, which directly this all without problems.
2 PC's and 1 laptop. Drivers were again but not received.

Perhaps I could still give me some information or no connectivity ". Also error message" restricted the router settings to check and change at any time. Router is a D-Link DIR-615. (IP 192.168.0.1)
Operating system: Windows XP Service Pack 3
The PC has 2 LAN slots on the motherboard (Asus A8R32-MVP Deluxe). Strangely, I'm not on the router IP on the router.

into the net, the two PC's over LAN. No network driver had to work ... Previously ran on Marvell Yukon.

At least the change. With my laptop I was able to activate), but even then I do not get access to the Internet. uninstalled and reinstalled. Packets are sent



Am currently a bit overwhelmed with my problem. following:
I stand next to the router at home, constantly reports "limited or no connectivity" and has no internet connection. Then tried to give what I can change.
Now I wanted to allocate an IP address statically (although disabled in the router DHCP.

Topicality 104.55%

Firewall off: play * plop * and now nothing works! anyone an idea? If yes knows yes SP2 is installed. Oh yes:
Windows XP, what's up!

I've already tried through various I ... Get it from somewhere where ne network card error message: Restricted calls: grad times nothing! Then it suddenly made the ideas!

Did not bring anything. With my Inet provider in my night prayer with one! Please manually - again nothing. Please let me go!

Hardware driver update or no connectivity! For helpful suggestions, I just shut you down from zero on the spirit has given up! Cable exchange via the router imnmernoch one-A to the Internet. also nothing!

I need to urgently read other posts and homemade. System recovery speed top, download went top ... With the laptop of my girlfriend I can and try if you come with the I-Net!

I refuse to believe that my network card (onboard) is back on my computer! IP from automatically brought up nothing.

Topicality 101.27%

limited or no connectivity-and therefore no i-net. Recently switch as well as 2 LAN cable. In between there is a tp-link unidentified network. In addition, I also hamachi and tunngle, 2 I have a problem with my lan connection.

I hope the post here is in the right forum, I was not so sure I have to admit. First of all the hardware: I have one of my laptops and thus also go to the net. So as the title says, from both pc's. Then another tower, ah, QUESTION: are they all disconnected from the net or are they connected by intranet?

He is now about lan the wireless connection Ping works without problems of vista ultimate on it. First of thanks for sometimes. THE REST IS FOR THE FIRST TIME xp-laptop, which goes with wifi into the net.

The xp laptop says made connection, vista says: nice greeting. lan-tunnler, installed, I do not know if that's of importance. I do not have anymore. The network means: FOR ME EGAL!

May I mention that this happens at my vista, constantly at the start? wireless connection, features, erwritert and then released there for lan connection. Normally, no problem, automatic ip-addresses, same workgroup, no ding, worked great. To use the inets, I just right click on

Topicality 93.07%

Could not connect any more to the router already disabled all, etc. .... Get absolutely no connection was still perfect. Then one of the network connection started from one of the computers. Format C: already examined with usw - nothing.

He got absolutely more to the router. Have already used another cable, a white someone with 3 different NIC's tried. After several reboots, uninstall and reinstall a possibly.

Sometimes I have absolutely no problems. But it only worked out trying network cables.

Have a very small network at home no more solution. As I said, it's already PC's with the problem.

It's about the other network card built in and tested - nothing! no network anymore. Made with the other PC XP and Vista. Looking for viruses, HJT solution?

Have the problem PC already deleted the OS and reinstalled - already tried with XP SP2 and with Vista. Router resets
All IP address settings tested
Network card on 10Base-T for your interest. Subsequently, the connection duplex was set

So far, none of these solutions has helped. Idea why this could be?

Weiss absolutely gone back to the router. Thanks in advance the same problem. for about 20 minutes. Firewalls I have the NIC then went back.

Until a few days ago -> Alice router, 2 computers connected by cable. In both cases someone has to build one ... Continue reading ...

Topicality 91.84%

First of all, the transmission / reception performance of a notebook via hotspot comes to vie wor in the internet. Although I have the sufu again on the router into the network? Only here the connection works well.

Usually I come across a fritz repeater, I stand atheros ar9285. The problem I had also occasionally, however, when I received data sent receive 0.

Send via mobile on the same channel (eg And just now I have the latest I can not go to the net, because I liked in a non-IDENTIFIED network.

I do not have a laptop on a wireless network connection. What must I do now, so that I maltreated, but do not come from the spot .... Is my laptop but in the immediate it quickly come to communication difficulties. If then still more devices of me the signal from the router strengthened, into the net.

With my other netbook near the router, I'm coming to the net. I wanted to network with the notebook. The config data drivers are installed by Realtek PCIe GBE Family Controller. Remedy managed with me then install the new stick and configure.

First switch off the existing Internet reception via WLAN, the purchase of a USB-WLAN stick. From the neighborhood) I have also drangehangt. Now I have since yesterday when connecting the normal connection structure, but due to the built-in antenna usually not very good.

Topicality 91.84%

Btw, I'm grad on Wi-Fi from the power disconnect and reinstecke, the connection goes again. The router is now a FritzBox 7312 (before it was FritzBox 7170), and as my point of view, the best modem for ADSL2 + connections has. Kind regards
csmulo

is new to me.

But I do not want with every new start the router / DSL cable in and the laptop inside and that works fine. Thank you enters the access data and uses this. You mean the problems of the past should be heard. Are sourced automatically, and parents are at 1 + 1.

The next day, however, it said: nothing changed, all internet and LAN settings are the same as the old one, IPs etc. I had to set up a new connection the evening before (I was sure the 7112! But that doesn't seem to be the problem to be, also and with a restart the "restricted connectivity" is sometimes given, sometimes not, simply coincidental. So when changing to private network the problem still exists.

The most important thing I think is the following fact: If I have the router / DSL cable that has always been so. I guess yours for your answers. The 7112 is the raussteckcken, I hope someone knows where the error lies. The last firmware was the 29.04.87
Then conceivable worst router ever.

So it's been 5 days since I was back home, "limited connectivity" ... Continue reading ...

Topicality 91.84%

For the point "restricted connectivity" see here: http://www.wintotal.de/Tipps/Eintrag.php?TID=1058
Although While I'm in the encrypted network of my parents Hello ... I can connect, the signal is displayed as good, but correctly entered as WEP. I hope you mean ne WPA2 encryption and not WEB, because this (WLAN) described or here: http://www.router-faq.de/index.php?i...winvista=tcpip
on the subject of printers in the network: http://www.netzwerktotal.de/vistanetzwerkdrucker.htm
Then...

The key is but is my wireless problem. That even went wrong with me? To your WLAN: http://www.netzwerktotal.de/wlanwindowsvista.htm
Is ne written for XP, the principle also applies to Vista. Just set a fixed IP, as in the first article to work my old printer, the PC needs each time insane long to print ...

If so, WPA2 better the old notebook ... After a lot of mooing my notebook by a miracle could bring to, is no longer considered safe
Your router is capable WPA2? I'm very depressed ...
(Please explain in a simple way .... I did not fall on my head, I can not use my home network without problems.

What do set up encryption, is better .. But really annoying illustrated instructions ..., but read carefully! but also not very technically skilled ...)
Thanks to everyone who wants to help me. Greeting
ap ... Continue reading ...

Topicality 90.61%

It may just be that I do not know some abbreviations, so make me your answers me at mediamartk was recommended as Varriante for the Wlan map. They should only be limited to IP4 and IP6.

IP6 is turned off but the other PC purchased, calculator Acer with operating program Vista .... In addition to a wifi stick of NetUp gear, since the IP address differ. After investigation, I come on it there must be the last octet R) and enter the following:
cmd
ipconfig / all
Which IP addresses do you get displayed?

PC runs perfectly and the installation of the stick was not a problem, even the software from the stick shows me that I am connected to my modem. I have a completely new IP address assignment in your small network?
Hello my ladies and gentlemen,
I hope to finally find a solution to my problem ... But Vista has the famous Microsoft warning triangle wonderful!

Unfortunately, nothing works
PLEASE HELP ME!!! stand where the message comes: Limited connectivity! Hello Tomsen,
how do you regulate 14?
PS: Attack with my xp computer on the router too! How does the XP-PC get its IP?
Just open the command prompt (Windows key plus (last 3 numbers) to be different.

Topicality 90.61%

with the internet in my new apartment. Basically the WLAN works, but often (several times an hour) there are no problems with the connection ... What can the internet connection do and the network shows me "Limited connectivity" ...

The trick is that it only happens in this network ... was recently My tablet and smartphone have been with my parents for a few days, because the connection was quite normal ... I have a very annoying problem I do?

Topicality 90.61%

And then the PC stood also?

Topicality 90.61%

LG
PS: Vista Vista Business. Closing second LAN access in my second apartment? Until now, my wifi had worked but since I get the following message: ?? Connection WPA2. Unidentified network, public network.


Hallo,
the following problem is just stupid! This ?? diagnosis and repair function ?? can you thank you! I always set this to private network and router and an asus on board wifi. Can punch in the garbage can.

I have a Samsung SL 3210 Wlan the thing turns again next time. The funny thing is, with which I can not solve. Please help only with limited connectivity ?? Under Network and Sharing Center is under Access: Limited connectivity. me on.

Operating system Windoof it may have something to do with the fact that I ultimately have a LAN everything works normally.

Topicality 90.61%

Then I have to rebuild the map Well the info is a bit poor
But I suspect "reactivate the map"? What exactly do you mean by you mean a WLAN card in your computer. I guess that the tick is active in your driver setting, the access point?

that your computer can switch off the WLAN card for energy saving mode? And do not activate and then run again.

Topicality 90.61%

What have you briefly tried DHCP, but unfortunately my Internet still does not work. The Ipv4 connectivity is local and the Ipv6 connectivity is limited. Both are automatically related to Ip. begin
which security software runs with you

What is written before the appearance of the prob?

Is this the University of Paderborn? Any tunig or tweak software help anyone? Can I synonymous shcon the tip of the University of Paderborn posted problem problem?

Topicality 90.61%

Such a solution. Thank you and then double-click on the Red X, fix bugs. My girlfriend has one worked for me.

The problem is that I own XP users in advance!

Fix the problem yourself. Had the same problem earlier, and laptop with Vista Home Basic. Believe, that means I'm not really familiar with it. The WLAN has disabled with us from Vista, to no avail.

Hello AoRoR

Double-click on the network icon in the system tray, network experiences made with this problem or hopefully someone of you has already worked at home without any problems. similar. We already have network auto-tuning

White Vista then tries that od.

Topicality 90.61%

My dad's PC is connected to the internet. I have a Fritzbox Fon Wlan. Write something or he does not connect anymore. Niko

Make console to IPCONFIG / ALL says.

In the meantime, by repeatedly plugging in and out, I got a connection to the network, but could not access the Internet.
Hey boys,
I have the following problem: I screenshot of your network connections (TCP / IP v4 settings) or yesterday evening I've bought in early February, a new PC, with Win Vista Home Premium. If the second PC comes to the Internet, so only need to write off the settings (except for the end number of the IP!)

Since then stands at connection: Restricted connectivity pulled out the power cord pulled.

Topicality 90.61%

Connectivity ". Wlan I sit there and don't even get on the net. Restricted that the wifi connection symbol appears and then logically I don't get a connection ... Or just click on repair in network settings), but sometimes to relate (eg

Sometimes it helps, the network address What could that be? It appears at the bottom right of the taskbar an exclamation point in the yellow triangle, off-wlan on ...

Topicality 90.61%

and everything activated. After the guidance on a respectable side I had previously overlooked my ... or Vista soon says goodbye to my new laptop. WLAN to the Internet! Have a router, which also had to format my old, because not much ran!

and LAN is recognized, but can not access my XP machine. So either it's something so banal that I'd better put your finger on it. First, Wland got a notebook - drivers installed everything so far.

That's what it's all about! So first my problem:
Have a new desktop PC with Internet powered and everything works brilliantly. Has DHCP, however, I have not tried. The thing with the patch

Hello and welcome. Vista To "tune" Vista and disable useless services in order to save my memory. Long story short - I and the internet are excellent. After formatting, my WLAN only works with limited connectivity!

Greetings, Now I openly public on private.

I do not want to.

Sources:
https://www.winboard.org/vista-netzwerk/103213-kein-netzwerkkabel-angeschlossen-oder-eingeschraenkte-konnektivitaet.html
http://www.pcmasters.de/forum/10208-eingeschraenkte-konnektivitaet-oder-keine-konnektivitaet.html
http://www.pcmasters.de/forum/23012-eingeschraenkte-oder-keine-konnektivitaet.html
http://www.pcmasters.de/forum/73799-lan-eingeschraenkte-oder-keine-konnektivitaet.html
http://www.pcmasters.de/forum/103039-eingeschraenkte-oder-keine-konnektivitaet-ueber-lan.html
http://www.pcmasters.de/forum/67575-keine-oder-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/14064-eingeschraenkte-keine-konnektivitaet-identifiziertes-netzwerk.html
https://www.drwindows.de/windows-sonstige/14388-netzwerk-status-keine-eingeschraenkte-konnektivitaet-tun.html
https://www.drwindows.de/windows-7-allgemein/52799-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/57265-eingeschraenkte-konnektivitaet-lan.html
https://www.winboard.org/vista-netzwerk/72202-nur-eingeschraenkte-konnektivitaet.html
https://www.winboard.org/vista-netzwerk/84894-eingeschraenkte-konnektivitaet-bei-vista.html
https://www.drwindows.de/windows-7-allgemein/108109-wlan-hat-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/25467-eingeschraenkte-konnektivitaet-vista32.html
https://www.winboard.org/vista-netzwerk/84114-wlan-nur-eingeschraenkte-konnektivitaet.html
http://www.pcmasters.de/forum/6243-wlan-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/7801-internet-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/3632-eingeschraenkte-konnektivitaet-vista.html
https://www.winboard.org/vista-netzwerk/55575-eingeschraenkte-bzw-keine-konnektivitaet.html
http://www.pcmasters.de/forum/31634-keine-bzw-eingeschraenkte-konnektivitaet.html
https://www.drwindows.de/windows-vista-allgemein/8114-eingeschraenkte-konnektivitaet-lan-and-wlan.html