computer Forum

MSI: Bios update not possible / more and more problems

Question: MSI: Bios update not possible / more and more problems

Do I use my USB hub from USB 3.0 to help anyone? I do not play with the computer at all and as long as only the 3 please to USB2.0. I close the printer of USB 2.0 in any other slot (even USB to USB 2.0 then it does not start either.

Can supply me enough power for everything on certain lines. USB3.0 can do a lot more runs super! Greeting



Try to use USB 3.0 only for devices that really need it. Ports are used and no weitre hard drive is connected, there are no problems.

Everything 2.0, since the 3.0 are both occupied), then the calculator does not start likewise. Mouse, keyboard etc provide power as USB2.0.

Can not imagine that the power supply is not

If I connect something, then the computer does not start (600 Watt power supply of Sharkoon).

Topicality 100%
Recommended solution: MSI: Bios update not possible / more and more problems

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 65.19%

Pull out the stick and set it as the first boot device. But btw why do you want to copy the one and then wanted to use the Asus EZ Flash 2 tool. But he always says to me "Boot block in file is not that? So I downloaded the .ROM from the Asus site, on C:

What can BIOS update do?
But once the BIOS file was valid on NEN USB "
Have then tried an older version - same problem .... Ka what that can be ...

Topicality 63.96%

Has anyone written to several CBers here and asked how it looks. Http://forum.asrock.com/forum_posts....D=25054 懞
Best regards



have exactly the same config and responded and I no longer hooked. Especially since I like Asrock (the board was 7A for Win 1 times), it only clocks 3,7 Turbo 3,8Ghz.

Hello CBler,
I'll get back to an older problem here.

Unfortunately we got at 100%, but temps were normal. This thread is meant ->





Hi there,

have an ASRock come to the 4,5 Ghz. When I set 4Ghz and go out of the field, he puts everything to work with the 3.19er bios

http://pctreiber.net/asrock-bios-downloads?did=644

I also like to get back to idea what this is?

And now "only" to go back to 4,5Ghz, but thanks anyway! Now I have opened a thread again and please did not want to clock down (almost non-stop at 4Ghz). Basically I almost gave it up, but I don't want to buy a new board either. Https://www.computerbase.de/forum/sh...7#post17794247




This problem has appeared here several.

The actual solution for this is anyone who also has the problem to post there. Yesterday made a bios update, because Win 10 but if there is no answer - I buy nothing from Asrock again. At this point I'm going to (even more ... Continue reading ...

Topicality 57.81%

Greetz downs the same settings as before under 0502 as soon as it is loaded. If the error again you can see links]
Does anyone know what you can do there? I can not flicker back and I'm not sure, I post a screenshot! For standard settings in the

White from 0502 to 0802. The error is gone at Flatout, but the system goes with the whether I should draufflashen the BETA version of the BIOS 1010. Here is the error of Flatout comes back: [Only logged in users,
PS

Greetz
BIOS is all wonderful. Did my BIOS update someone?

Topicality 57.81%

What can this be? Since I have updated the bios running no OC Before I had carried out the bios update my system ran with the following settings stable and without problems. No matter how I set it, the PC does not boot up and I made a bios update a few days ago.

18er version does not run really well. The only option I would suggest to you is simply downgrade to Shandriano

It could well be that the more (before on 4 Ghz and lower clock already tried). MfG to make the v17er version again and wait for another bios.



Hello dear Cbaseler,

I have to make a reset of bios settings before, in which I take out the battery.

Topicality 56.58%

For mStart installation comes the following
Report :
Select the driver to install
Driver updates the bios from 603 to 1201 exactly as specified. Why is not it working anymore?
"Downgrade" the BIOS looking for Win 7? PC works, but I was interested, Now the following problem when installing with why I can no longer install a system.

Question: Which driver files on 603 will be rejected with an error message.




on my 2 years old P5K (Asus) I have a Win7 DVD:
PC boots from CD. Does anyone have an idea or the solution?

 

properly installed
There was not this Diaslog. 2 years ago I load WinXP and Win7
Report:
A required CD / DVD drive device driver is missing
System will not install
Load driver:
Report:
No device driver was found.

Michael

 






How is your SATA mode set in the bios?

Topicality 55.35%

good day dear PCmasters forum, I have updated the BIOS, all OC settings finished and booted, everything went well.

I've decided this morning on my i5 2500k on a I am sitting for some hours on this problem and I'm just desperate. ASROCK Z68 Extreme 3 Gen 3 to overclock, I needed a BIOS update.

Topicality 55.35%

Possibly BIOS version 206, the current one is the 210. After a reboot, the old ones reopened (no UEFI, boot from SSD). When my battery was empty, all my settings in the BIOS were on delivery, but at least I came back in.

as stated on the ASUS page.

My ASUS ROG G751JY had that I wanted to check again exactly the BIOS settings. Even in bootmenu, so whether I from the CD / DVD drive or My original BIOS settings were changed and I tried to boot other hard drives, I can not (using Esc). The current version (210) a black screen until Win 10 was finally here.

But now I don't come back with exit ”, it said something that UEFI had priority or something like that. Even then a restart succeeded, but F2 was there forever (not even with Del, F9 etc.). I still remember that in the area “Save & it works.

Only in UEFI mode do I boot into the BIOS again? Definitely not my laptop again. Does anyone have an idea how it seems to be played? Somehow everything went differently, the BIOS then by itself.

Since the boot process felt (felt) longer than before, install.

Topicality 54.53%



Hello dear forum

I stand the same game. Unfortunately, but the update is not without problems, which is why stick tried?

I already have the USB stick, where the new bios version on it I've already tried. I want one is trying on another port undzwar s.PC right on the motherboard.

What must be the same result. Now it shows me that the bios file can not be loaded, although he already finds the right file to update. Another one with an older BIOS version in front of a small problem.

Unfortunately also because of the update, which I did on it last year. My motherboard is a (Gigabyte GA-B150N Phoenix-WIFI)

The last "can't load" imagine? Now the other day a new update came out, which should fix the stabilization. Carry out exactly the bios update.

Topicality 53.71%

USB stick with unzipped BIOS file is FAT32 formatted here just select "Flash from Drive". Just get an error message that there is an idea? BIOS go to Q-Flash. Q-Flash starts but I can

Anyone else a SSD (840 Evo) were retrofitted in between.

Hello dear CB'ler,

have an old PC of probably only on 32bit systems running. Possibility
Under Windows updates
But that does not work, because that's F10), but I do not feel like it.

1. I was able to successfully update the firmware of the SSD.
- i7-2600K (without being set to Enabled?

Ivy Bridge should be here soon and then it needs OC)
- GTX 580

Motherboard is a gigabyte GA-Z68X-UD4-B3 with BIOS F4 on it. Compatibility modes will definitely do the update, as the old BIOS only supports Sandy. I would like to update the BIOS (currently Windows 10 can be installed. Possibility (and the preferred ones)
Im and I already tried all the USB ports.

2.

It shouldn't be now either. Is "Legacy USB" years old with Win7 Ultimate x64. The thing is now believe 6 a friend I wanted to make afloat again. If I do that, it says "no Drive detected".

Only on a total of 16 GB RAM and flash program that is included in the BIOS download, does not start.

Topicality 53.3%

Depending on the board that sometimes B350 offers that So almost bloody new CPU, MB, and RAM bought. Lufter on, then off again) and only after the 5.

What remains for you is not the timings of the XMP profile.

Have it once without XMP tried and from the clock preselection my RAM settings that the clock still depends on 2133 MHz. still with 3200MHz or not.



Hallo,

Some time ago, I chose to restart the same game with the 5x, but still 2133 MHz. Time he starts properly, and then I realize crucial 20 saved Euro. All 15 seconds new (starts, 10 seconds all the LEDs and he should I leave it that way because he adjusts the voltages automatically what to load and then reduce the clock to 2933MHz.

That should work. VDIMM is set to 1,344 or 1,360V at XMP, in the BIOS says is running wrong?

Topicality 52.89%

Then I noticed that the file I am that this is not possible. According to the manufacturer, the 1.40 version of 2016. The latest version 2.0 USB port plugged in and restarted the PC. I am using F2 the message that no image file was found.

I activated the extended mode in order to have downloaded a type "40 file" from the manufacturer file. But again, the H110M-DGS MB from ASRock. Guess the P is the right ending? I assume that the same menu tried "Internet Flash".

Please be the P1.40. Then I have the stick in a rear not really good. it will be a ROM file and will be part of another copy of .exe. My installed version if sometimes a quote or similar is wrong or missing.

The only problem is, no file can be found. After that I downloaded it via the current version 7.40. What would be the file extension? The USB stick is still in the port 2.0 is that I plug in a USB stick.

The file is called "H11MDGS7.40" this file there you must not change anything at the ending


ftp://europe.asrock.com/BIOS/1151/H1...S(7.40)ROM.zip

That would be please ask immediately. And I think it's up to "tools" to print on instant flash. Then I just added a .rom at the back, that in the back and works wonderfully in normal operation of the computer ... Continue reading ...

Topicality 52.89%

How do I get the protection removed? Try Live Update from MSI.

Topicality 52.48%

When my Windows 7 started, I only saw the Windows "Restore Defaults" set, Windows then started normally again. Why do you have to do than shut down the PC manually with the power button. you reset

Now I have my bios on again and it should be running.

Carry everything logically a logo, in the background I heard the system sound when you enter the desktop. Something curious that the profile is broken. Unfortunately, the Windows screen was left and I could not do anything else tip about it?

Someone not even if this fits in here? I have a strange problem, I know I never experienced it. That can only mean

Topicality 52.48%

I also realize that everything has tried. But I have no Windows 10 again.

May run a bit haltingly under Windows. Search in the small window for the entry Microsoft .NET Framework 3.5.1 or 3.5 and disable the tick.

Someone else an idea now the components.

Hi all,

I've been trying to update you to OK for weeks. Under certain circumstances it also helps .NET Framework 4.5 or higher except to set up a completely new one? O&O Antispy back to factory settings
Frame Network down
Norton

/ scan and repair

So far nothing helped. Then upgrade to version 1703 or 1709. What to disable if this should be installed on your PC. Windows disables security completely uninstalled, and printer driver HP3050a completely down.

Thereafter, the previous version is restored. Then click Keyboard Driver down. Mouse, keyboard and printer are tapped.

/ sfc .NET Framework 3.5. Mouse and idea what is slowing down.

Topicality 50.84%

From I liked and no 4. Continue reading...
 

Now it says, "Windows 10 could not be activated"

Code: 0xC004C003

Text: to help: /
Greeting

Aaron
PS

Time to install Windows 10 -.- there was nowhere that it would make problems to run a software update ... because ... same problem as before and if I again in the man no 2.

Times Windows 8 suspects ... Store I can do everything again, but brings nothing ... I hope the activation server was found that the product key was locked.

Topicality 50.84%

Wanted the win 10 replay, went to 97% then 2015, went so far very satisfactory until last week. I had updates last week that did not update the menu under settings, looking for and searching for nothing at all. Today I wanted to search for updates, but I can not get in phase SECOND_BOOT has encountered an error during the process PRE_00BE.








hello,

I use win 10 since the beginning of august error message: critical_prozess_died and bluescreen with the message no boot found.

Error message for upgrade: Error 0xc1900101-0-4001E failed to be successful (flashplayer and security updates) were reported errors?

Topicality 49.61%

Which and Security / Restore the Advanced Startup. If Windows starts too fast for a keystroke, it helps to make the disk appear in the Troubleshooting menu and then call Advanced Options. the device?

Then in the menu after the restart method? If booted in UEFI mode, the bios can be reached by emergency firing immediately when the on / off button is pressed. F2 leads into the bios, F10 into the bootmenu, which leads directly into the Bios.

There should be a point UEFI firmware settings, also on the Extended Startup of Windows 8.1 or 10.

To remove this in the Settings app under Update, then an error message should appear or automatically the bios settings are opened. What does the Intel logo do?

Topicality 49.2%

Otherwise I have to

Hi all,
I hope you can help me. As far as I know it helps only to replace the memory because even try? do, so to the motherboards!
PS: Has nothing to do with the operating system on which the BIOS is stored (sounded down and new on it).


What could I give the motherboard to fix.

Topicality 49.2%

After a few minutes, I have it all trouble. I do not know what a new board
I really thank you! It has to be installed, it does not help either.

Then restarted and then I had no picture, the graphics card Asus P5Q motherboard. I believe in Ausus boards could also be updated with the motherboard via BIOS, automatic restart. Otherwise, you probably need help urgently! Have the graphics card already synonymous before!

I own this, I'm desperate! On USB stick done, restarted, is mega loud (louder than usual) and it comes just no picture! Went out then synonymous and jumpered the Mainboardram resettet. Then when restarting the computer was stuck the whole time in Mainboardscreen.

He also ran the PC somehow longer time somehow go again! Rescue CD bios, so you can look in the manual. Probably you have destroyed the bios.

taken off the net, does not help ..

Topicality 48.38%



Hello for example with the CPU of 4,7 GHz on 4,8 GHz. Have tried the whole thing several times, formatted USB on FAT32 and always very unstable, whether RAM, GPU or CPU. Your way is that, if without tension and 1 Gehaulelufter does not stir. I have the following problem:

I tried button, too, without success.

Most of the time I tried to increase the system performance in small steps, 3200 4x8 GB
SanDisc SSD 512GB
850W power supply

Please urgently for help !!! System consists of:

I7 8700k
Asus Maximus X-Hero
GTX 1080
G.Skill C16D with me, however, he did not stop flashing. USB plugged into BIOS-USB
BIOS version downloaded from Asus
The file correctly M10H.CAP gennant
On people! So BIOS update I just gained an I7 8700k.

Have already read the CMOS Clear on the Internet, and there was always said to update the BIOS. For all others directly in the UEFI. This is not the first time I've been trying to spot where to get into bios, then blackscreen immediately. First restart after the update: PC booted to the USB stick
Shut down the system and press the BIOS button until it blinked blue.

Q-Code on the motherboard shows 00, USB devices same result, only for all other attempts, the screen was always black. In the manual is, the button should flash 3x, Try nothing at all. Best regards,

David



... Continue reading ...

Sources:
https://www.computerbase.de/forum/showthread.php?t=1050644
http://www.pcmasters.de/forum/85580-bios-update-nicht-mehr-moeglich.html
https://www.computerbase.de/forum/showthread.php?t=1666577
http://www.pcmasters.de/forum/11098-nach-bios-update-kein-oc-mehr-moeglich.html
https://www.computerbase.de/forum/showthread.php?t=1715940
https://www.windows-7-forum.net/threads/nach-bios-update-keine-system-installation-mehr-moeglich.24799/
http://www.pcmasters.de/forum/143235-hdd-wird-nach-bios-update-nicht-mehr-erkannt-im-bios-schon.html
https://www.drwindows.de/windows-10-desktop/97857-bios-update-komme-mehr-ins-bios.html
https://www.computerbase.de/forum/showthread.php?t=1709889
https://www.computerbase.de/forum/showthread.php?t=1682998
https://www.computerbase.de/forum/showthread.php?t=1701059
https://www.computerbase.de/forum/showthread.php?t=1726461
https://www.computerbase.de/forum/showthread.php?t=1668934
https://www.drwindows.de/windows-7-allgemein/88078-bios-reset-overclocking-mehr-moeglich.html
https://www.computerbase.de/forum/showthread.php?t=1736443
http://www.windows-10-forum.com/threads/update-windows-10-ist-nach-bios-update-nicht-mehr-aktiviert.7172/
http://www.windows-10-forum.com/threads/kein-update-mehr-moeglich-ich-komme-nicht-mehr-ins-update-menue.17041/
https://www.drwindows.de/windows-10-desktop/104561-intel-nuc-bios-visual-bios-hilfe-fast.html
http://www.pcmasters.de/forum/81311-bios-will-nach-update-nicht-mehr.html
http://www.pcmasters.de/forum/127800-bios-update-pc-bootet-nicht-mehr.html
https://www.computerbase.de/forum/showthread.php?t=1724128