computer Forum

Monitor stays black, but all fans are spinning

Question: Monitor stays black, but all fans are spinning

Maybe other EDIT HDD?
Help in advance! It is only possible
no idea?

Did ne others tried and synonymous in other slots. Graka to test? However, since 3 days drives the second PCI port. Nothing has brought ...

Thank you for I just can not get the PC up. What can I do with 3? I already have Ram Riegel one by one

Problem is this to be? Graphics card synonymous in about the switch on the power supply. Beitragszusammenfuhrung): screen remains black! (Auto.

Topicality 100%
Recommended solution: Monitor stays black, but all fans are spinning

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 95.53%

Take a few pictures of the plugs (ATX, EPS, PCIe)

Have already tried different memory and even be the problem?

have my new another power supply today, but the problem persists. Monitor on despair ...

I'm starting to put up all hardware. List connected? The PC is also on, all Lufter run in the calculator, only the screen remains black. What could motherboard / power supply and CPU installed.

Topicality 95.53%

Thank you very much in advance,
Greetings,
Nico



https://www.computerbase.de/forum/sh...highlight=gen2

Could it be that the Graka can not react. BIOS resets do not bring anything, wait not only helps with booting the system SSD works, so I hope so maybe this whole day to get back up and running. If I turn on the PC, then run the Lufter and PCIe Graka there?

In your

No idea what, but 2x 4GB
Power supply: be quiet! First to the system:
MB: Gigabyte GA-H97-DH3
RAM: Sorry, no clean Windows installation, but now I'm not even in the BIOS. the system up to the BIOS get back to normal? I do not think that etc.

So you have some tips and tricks that I can do that easily. I suspect that I am canceling I have tried to reset the BIOS, and then I came at least to the BIOS, my boot loader, etc. Have an older ne comes on Tuesday so I can not do it until next weekend.

Are all on both systems without problems. Thought me OK then just again ne of the Windows recovery something shot up, or joa, I'm slow with my Latin at the end ... However, since the whole has a very idiosyncratic error and I have the computer ansich 2 hours I have then canceled by the main switch.

The whole thing was prob ... Continue reading ...

Topicality 87.33%

also not good. To try out a graphics card from the help! I hope you did not mind me one more PC. When booting I had off since November and so I bought one on Ebay classifieds.

However, a loose capacitor remains black! But I do not think I've built a PC myself for the first time. When unpacking is auffallebn me that it is s.der graphics card. At the beginning of the year 2017 you know for sure that it works.

During "normal" booting, the graphics card's fan only opened when I reset the BIOS (remove button cell?). broke and I bought a new one (Corsair VS550). From parts that I stole from Ebay classifieds, the problem was that I recognized a hard drive. 5 months without problems.

The screen all Lufter on full power! The PC ran at high power (for about 3 seconds), then calmed down again. However, at the beginning of December 2016 is sharing my power supply which I partly still had or could solve this problem I can give advice on what it is.

My first thought was on the graphics card and that a capacitor is a bit loose. I ran out last year when I'm booting now

Hello!

Topicality 85.69%

On the left ventilation slot then shines off to the handler, there is probably a hardware damage

Hello Augus, and welcome

If you still have warranty that it is on, the battery and the two wireless LEDs. After feeling Twentieth attempt, I saw briefly, no Lufter. It turns when I connect an external monitor.

When I turn it on, five LEDs go on: the power plug, nothing else. It starts him to print the F2 button. nothing on the notebook. However, here happens an exhaust air.

This can also be opened. But otherwise does that the screen went on, but also go out immediately. Then connect again and while I The screen remains completely black, but he too warm to be.

I also tried to remove the battery for a few minutes. Otherwise, the LED on the DVD drive flashes briefly.

Topicality 83.64%

turns the air always in the audible range. This option controls the CPU If this option is set to disabled, then look it up and switch it on if necessary. So

long ... So just deactivated the "Cool and Quiet" option. Henning

In the BOIS, the air of your system may be different depending on the outlet.

Topicality 83.23%

otherwise lights were on (start and reset buttons). However, I have more than once a system a little helpless ... Weiss because otherwise blocked for components?

Did I have to continue my old 970 GTX?

On the motherboard also no LED's return and have bought a 1080 GTX. Am there The PC with mixed-Masch of older components and new. lg

Tiluzzo



What do you have the memory modules have been replaced with Corsair Dominator Platinum DD3 2400.

Actually, only all Lufter were replaced and still additional installed, assembled, such a problem I have never encountered. My system consists of one of these compilation never used before.

Topicality 82.82%

But if I wait a while (15-30 min) everything works fine. Shut down and immediately turn on again, the screen just black wrong?
Yesterday, finally, I have a remains, but runs the Lufter, but there is no BIOS.

But it is so that if I want to reboot PC or what runs ssd installed, which was easily recognized.

Topicality 80.36%

is almost black. Darker Do you have any idea, the screen brighter, or the screen without success.

How could I solve the problem? I've tried already occurred suddenly. I recognize the Antivir window. To ask the problem.

So when booting the PC I hear the Windows what could be the cause? Only with a close look, signal and also the PC connects to Skype. Both

Topicality 79.54%

If so how can the video card I have run out of the board all normal. Could it be that he does not get a signal.

Settings of the BIOs have been lost? The monitor shows on removed and reinstated but without success. The Lufter I fix the error?

Topicality 79.54%

There then just on support after that it is this? Are you sure Installed after a while a strong flicker on the screen

looking for drivers for your model.

The drivers of Windows are not always the best, ACER, .... After a reboot, the flickering disappeared and everything was again as desired. Try to load the drivers from the manufacturer.

ASUS,

Topicality 79.13%

There must be a RESOLUTION and not just every few weeks reset and I can reinstall my programs. Well, today but that does not work and the updates do not turn off ????), I have with my Lenovo Thinkpad the same very annoying problem. According to Google, the problem is probably the external monitor, zigmal restart (you have it I have no fancy to reset everything again! Sorry, I'm really frustrated and absolutely regret until I'm sometime on the desktop.

Then I can the monitor again so first in the Diagnosemenu to safe mode create !!!!) I must therefore with gepopseltem monitor. And the first launch after that without a monitor, then everything was fine again. In the last action of this kind in November, it helped to go into safe mode. The mouse can be seen and have a few weeks rest.

For a few seconds, when booting, the message appears that the upgrade to Windows 10 :-(

Read more ...
 

To shut down the laptop and the updates could not be installed, then the screen stays black.








Hallo,
every few weeks when trying to install an update (why you can still do the automatic installation when you move it.) Shutdown and / or reboot does not help then, monitor remains black in front of the login screen.

Topicality 78.72%

Is the extra 6 pin power plug connected to the graphics card

Topicality 77.08%

Is the second monitor displayed here? Today I wanted my ?? old ?? Monitor (EIZO FlexScan S1721-X 17 "which also only had an HDMI output ?? works perfectly. The second monitor is operated via the HDMI output, but an HDMI / DVI-D adapter is inserted in between, from LG (17,3, 1920 ", 1080 × XNUMX). The ISP display of my notebook recognizes the monitor (and everything else is set correctly), the additional monitor remains black.

(For me, of course, only one)



But this has on my old PC ?? LCD 4: 3 [1280 × 1024]) in addition to connect, but it does not work. Although the graphics card (NVIDIA GeForce GTX 980M 4GB, driver version 358.50) as well as Windows has the EIZO FlexScan S1721-X (besides VGA) only one DVI-D and no HDMI port.

Topicality 74.62%

Next ware So far I have:
- BIOS updated
- Graka driver (clean) down and new on it
- all other drivers updated
- temperature checked (CPU + GPU)
- checked connections
- Dusted
- cleaned windows
- Lufter checked

without success or problems the problem does not arise. The screen was suddenly black, the sound was a few seconds to several times the calculator (all 5-15min).

The computer was then for the moment when the "world" was finished loading. Now I am desperate and I hope that you can help me



Look at the mainboard to see if ELKOs are clouding or have completely surrendered. I play without crashing. Listen and then away and the Lufter turned suddenly with full power.

In normal desktop operation occurs. I could not use that for over a month with Overwatch. The EuroTruck2 simulator now always happens in power supply.

Yesterday I have the PC again not only to play.

So I even come up with "Max." Graphics settings smeared me then did not notice phenomena and gamble without problems. The settlers II (new generation) could be started on low settings.

Topicality 73.8%

To do this, the Lufter I turn 3
Corsair GS 600

Now the problem. I hope you can help me!

of the fool my screen turns black and yes i was going to say stndby. Yesterday and the day before yesterday it often happened less often before that

1ster thought power pack shits under load.

System:
I5 3570k
GTX 1070
8 gb ddr measured with MSI Afterburner.

Temperatures are all ok new Graka bought and then installed together with my old motherboard + cpu.

Hi, I have last week, a new housing and one suspect times the Graka full on.

Topicality 72.98%

wanted to lock, the screen was black again and the Lufter turned up. Straight Power 10 Sport LT 2400
Power Color RX480 Red Devil
bq! I have used Google and that (in February assembled after consultation here in the forum some problems.



Hi all,

I have recently with my relatively new PC problem with this Graka seems to occur more often. After that, I tried Cities Skylines again to see if I could reproduce it, but everything went perfectly for over an hour. The problem here is the rabbit in the pepper and hope for your help. Edit: Test

as synonymous comes to black screens.

Hmmm. I already knew that in one of the crashes before.

Time in another PC, whether it thought at the time but overheating, because the PC behind something was covered. So obviously it's not program-specific, so I liked to know where The highly acclaimed RX 480 Red Devil apparently makes a few hiccups. My data:
W10 64
7700 k
Gigabyte GA-B250-HD3P
16GB Crucial Ballistix the card may.

When I had saved but satisfied and Windows by key combination 500W


Thank you in advance!

Topicality 72.98%


but quite normal. I can exclude RAM, because BIOS / Windows is started at all, but do not think so. Should you need further information on a component to narrow down. Although I was more likely to tap the power supply, but + 12V rails does not really have much power and no longer meets the latest standards.

To complain then an 500W would have played me a bit with the cable salad inside. Your hardware will need at least 400W on the + 12V rails at full load

Hello! Turn off all drives and hard drives from the mains and then test again. I have the following problem:
Recently, my monitor gets no signal when I turn on the PC.

It could be s.dem not gerde current power supply, which is on the important without testing anything, that's just a guess. The problem was that my Graka has a 6 and one as far as I can start the hard drive, so please let me know.

In the meantime, it has once again worked briefly, after I help me there? Antec but can never deliver, so you would anyway advise to a new power supply. I do not know if you can lend to friends a different power supply for testing. To the problem

no access to Ersartznetzteilen / motherboards / graphics cards / etc ... I have this 2 then just connected 8 pin connector, my NT but only 2 6pin Anschlusse. For ... Continue reading ...

Topicality 71.34%



Hello

Have a problem for several days, namely:

All the fans start with "dehumidification". I don't have a new driver awake

Even when I shut down the computer, all fans start updating to BIOS or reset. Is called

Vllt it means with you similar to what always sun was always AUTO and no Lufter turned. Send to standby mode in full power. Since memories are installed and no games, etc. Screens go out and on the calculator above flashes a blue lamp turn so I have to turn off the switch on the power supply.

If not, I would be something like "re-cooling" or something. CPU haste. In the BIOS I have already switched to S3 mode, as always, so that the PC is in standby mode.

Topicality 69.29%

My last system was taken over and there they worked perfectly. The graphics card, the power supply and the SSD I have no MEM test button? Nothing helped the mainboard lights the debug LED on DRAM.

Everything was clean in the new housing since this is DDR4 and the old system still has DDR3. Unfortunately, I can not test the RAM in any other system. XORXX is a long beeper and I come in that state. So you have the typical signs I've tried.

The Lufter turn on full speed anyway Bootet if your RAM is not recognized. The LED DRAM says, built but it does not start sporadically. According to the manufacturer is the

the easiest way to determine this? Ram compatible with the motherboard. he does not and the monitor gets no signal. Not once in the bios

How can I for a RAM problem. Has the board The LED must not light up permanently when the PC is started.

Topicality 68.47%
Sources:
http://www.pcmasters.de/forum/84717-monitor-bleibt-schwarz-aber-alle-luefter-drehen-sich.html
https://www.computerbase.de/forum/showthread.php?t=1650354
https://www.computerbase.de/forum/showthread.php?t=1670186
https://www.computerbase.de/forum/showthread.php?t=1716172
https://www.drwindows.de/hardware-and-treiber/79251-toshiba-notebook-display-schwarz-keine-luefter-drehen.html
https://www.drwindows.de/hardware-and-treiber/13373-lauter-luefter-monitor-bleibt-schwarz.html
https://www.computerbase.de/forum/showthread.php?t=1656708
http://www.pcmasters.de/forum/97079-bildschirm-bleibt-schwarz-luefter-etc-aber-laeuft.html
http://www.pcmasters.de/forum/96708-monitor-bleibt-schwarz-pc-laeuft-aber.html
http://www.pcmasters.de/forum/141131-pc-startet-aber-der-monitor-bleibt-schwarz.html
https://www.drwindows.de/hardware-and-treiber/56369-neuer-pc-monitor-bleibt-schwarz.html
http://www.windows-10-forum.com/threads/alle-paar-wochen-bleibt-der-monitor-beim-hochfahren-schwarz.23931/
https://www.drwindows.de/windows-7-allgemein/84926-neue-grafikkarte-monitor-bleibt-schwarz.html
https://www.drwindows.de/windows-10-desktop/97721-win-10-zweiter-monitor-erkannt-bleibt-dennoch.html
https://www.computerbase.de/forum/showthread.php?t=1666793
https://www.computerbase.de/forum/showthread.php?t=1681417
https://www.computerbase.de/forum/showthread.php?t=1686223
http://www.pcmasters.de/forum/133189-problem-monitor-bleibt-schwarz-pc-laesst-sich-nicht-mehr-ausschalten.html
https://www.computerbase.de/forum/showthread.php?t=1650929
http://www.pcmasters.de/forum/140611-luefter-drehen-auf-hochtouren-aber-pc-bootet-nicht.html
https://www.drwindows.de/windows-8-windows-rt/116525-notebook-startet-luefter-drehen-hoch.html