Fix memory voltage increase

Question: Memory voltage increase

Hello, I hope the thread is not yet ... run, only the memory I could as I said still net clock ... So I'm so happy sometimes on the clock ^ ^ and my question is now how I with my 8600GTS more Tension on the memory war? The GPU I have now stable on 800MHz at 1.45V

Topicality 100%

Recommended solution: Memory voltage increase

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 66.01%

Question: Increase to 8GB

probably nothing ... For video / audio / image editing already ...

For internet surfing it brings

Topicality 66.01%

Question: Increasing the TDP when increasing the FSB?

Because more than the FSB to give 33mhz no more than 1,5 V 24 / 7. If you say now you give the CPU the CPU is still in the green range of temps. So you say yes you should then I'm still another question ran because of the PII. In order to

Well, yesterday I could not test with prime whether in direct connection with increasing the FSB? He also seems to be doing very well without tension, because he runs since today I always thought the TDP increases only with voltage increase. That's why it now runs on 8 * 233mhz. (= 1,9Ghz, real 1,85 Ghz) long 3,5GHz Phenoms with 125W TDP.

Mfg Agena
PS: Looking forward to helpful answers. (!)
* Edit *
works well. If that was not the case, AMD probably had not raised. Therefore my question: Does the power loss increase the power demand? Tomorrow always with almost 100% utilization, since my mum very rake aufwandige programs aht or

To be sure, does 1,55 or 1,6 increase how much of that has affected their lifespan?

Topicality 65.19%

Question: RAM increase (Windows 10)

Is there a risk that at a bitrate Win10, 32 or 64? Otherwise, really no, and why.

Read more ...

@ soccera, what is mad for an increase in the RAM'S WIN 10 plays?

Topicality 65.19%

Question: Graphics card price increase?

This is January.
But now Nvidia apparently pulls and it has the Komplette and the dealers take the chance. We have the pre-Christmas season, there are first together with the chip manufacturer? Hang on that somehow an overcapacity and prices go down again.

But until the end, of course, can fill only the online shelves of their expensive shops. Wait until after Christmas, then there is someone explain? Can always be like that.

There is not much left over gtx series has now become a lot more expensive except for a few exceptions. Especially since many dealers operate several online shops and supplies the Americans and Europe gets the leftovers.

Topicality 64.37%

Question: Vcore raise, how much?

Mfg.
MasterONE
And now I did not want me even from the temps ago. But I know friend is there for Benchmakrs: P). not how much!

With my current coolness, the thinking is going to increase small steps. I OCe at the moment already diligently (if dare to increase the vcore. Vcore only in

Topicality 63.96%

Question: After RAM increase no picture

Now I'm afraid that my motherboard - motherboard - socket AM3 + - GA-970A-UD3 (rev. 1.0 / 1.1)

I ordered the same, was delivered, unpacked and installed, but I have the problem that I have no picture then ... maybe not compatible with my new RAM is ...

When I put my old RAM bar back into the PC, everything worked fine again ... Just take a look at the memory compatibility list under Support & Downloads

GIGABYTE 4, then only 2) - the picture remained black.

Have all the possibilities for the slots tried (first all

Topicality 63.14%

Question: SDRAM increase, no more display

Putting money in is of course wasting money. In my opinion, the card is running. Maybe I can get 30 euros
what exactly did you buy for ram? You could test a bios reset times, so pc synonymous DDR2 ram are very expensive.

I could already figure out years. Now I wanted to be able to do that much faster with more ram. Storage timing in the bios is possible to find something to change. My colleague, but can not expand the memory.

I am an absolute layman disconnect from the mains and take out mainboard battery for 2min. Unfortunately, I also helped here. Approximately 10 The money was synonymous for a new pc save that SDRAM memory cards are needed.

It would be possible in the field of PC and software. Maybe you have luck and Siemens calculator, age ?? It does not matter how many no manual o. A. For comparison 8gb DDR3 ram cost only about

I then ordered 3x 512 MB cards from the network and available after three slots. Have also tried another card, from a colleague, with 126Mb, does not work either. But you are not in the bios wrong ram or wrong settings. There is certainly a setting cards I use or on which place.

In such an old pc not yet correct, only which? It's the same problem. For SD-ram, DDR1 and mitlerweile are the maps oK Immmer that come, you can not veins what.

Topicality 63.14%

Question: Clarkdale Overclocking - FSB boost reduces vCore?

Under load, the voltage breaks Corsir H50.

Edit: If I set "CPU Voltage" to "Auto", the core voltage in CPU-Z has already gotten a bit out of it, but now I'm facing a strange problem. Do not set the Vcore to Auto, it will grill you on the 4213MHz Primestable at 1,32V and 200MHz bus clock. Currently I am at an FSB of 169MHz and the Core Core Voltage always goes down when I increase the FSB.

Today one was with the Achja, motherboard was an Asus P7P55D. Actually, but with the settings had the attachment. I have set everything in the BIOS manually, but the voltage goes to CPU-Z under load as 1,072 V is displayed. Supplement to the 26.10.2017 21: 32 clock: at 1,360V, which is already dangerously close to the maximum recommended by Intel 1,400V.

Chilled under one end still the i3. 4GHz should be included with 1,28V. The last time I got OC'd was at 3,9GHz at 1,25V. CPU-Z Screenshots Core Voltage at 1,303V are or not? Had my I3 530 once on

Hey guys,

I'm just trying to figure out how much I can get out of my old i3-540, and I can easily figure out how higher currents are flowing. with an Asus P5K-SE and a Q6600, OC-Heaven, so to speak. My i5 660 that gives me trouble in terms of tensions. Now I have a MSI P55A-G55 board and Load Line Calibration against it.

Topicality 62.32%

Question: i7-6700k strong temp increase despite WaKü?

The Heatkiller I have CPU heads again today.

dismantled and freshly smeared with thermal paste. Before that I had a Q9550@3,6Ghz and I had a CPU and the cover isn't right? Hardware: Asus Z170 Pro Gaming with i7-6700k
WaKu: Watercool 100% Mounted Correctly.

Arctic suspicious. The only tool is not even the Temps as now with the 6700k. Kuhler it looks so bad everywhere. Warmeiteitpaste is also distributed correctly, not despairing or

Now I'm wondering Cooling MX-2.

Hallo,

I'm just where the big fluctuations come from? Heatspreader also lost. It was possible that the Warmeiteitpaste between too little not too much.

MFG

Cygnos

Earlier, since the Intel since cheap paste used Mo-Ra2 Pro actively cooled and Watercool Heatkiller 3.

Topicality 50.43%

Question: Increase memory

You can do the empty thing you do when setting up on D: at your disposal.
Linx is providing the disk in a folder. I have a second one but I do not use it.

plate with 250gb on the cz. So you have the disk space then the disk in the disk management.

Topicality 49.2%

Question: Lenovo IdeaPad: increase RAM memory

Mainboard prozzesor etc. - advise against, because you would gain practically no noticeable advantage ...
If so, I became aware of this project - if hardware replacement

Topicality 48.38%

Question: [solved] Have the maximum memory in the msconfig increased

The "pleasure" I had no longer got into my computer. Now Win7 doesn't start anymore and I do too. The Acer 7750G with Win7 does not work anymore after I accidentally use the maximum memory in the safe mode using the F8 key at system start?

Since the computer but could boot easily in safe mode and make the settings back zurückig. Do you come with you no longer in the msconfig under the tab Start and (then advanced options) have set maximum.

Topicality 46.74%

Question: Graphics card is no longer recognized, after which I increased ram memory!

Thanks on 4gb, but now the graphics card is no longer recognized!
maybe not help one? I had only 2gb ram memory and have raised the following problem. Take the increased RAM memory out and try again. Are the RAM memory identical?

Can me

Hi Guys! I'm in advance!

Topicality 44.69%

Question: GTX 780 voltage drops

standard 901 MHZ there. However, I hardly get into a game like Ark Survival and the power target is also max. Is pretty frustrating as it runs at the moment -.-
Thank you in advance
~ Nyshi

could be the voltage transformers that are too hot and the card clocks down

In the menu are the Inno3d 780 in my computer voltage dips ...

Good evening
For a long time someone has hired one. The temperatures never evolved over 70 ° C, reducing the voltage and thus the clock continuously. at about 1.05 V and 1150 GPU clock.

For example, at Furmark, does she have a constant idea or a solution?

Topicality 44.28%

Question: Offset voltage probing

Now that happens again sometimes, but putting the offset around this stress change around. Have recently measured biosbattery, 3,3V were so lying? However, at the moment the power of the startup is just enough for me, then it started again.

On my Z77 board I'm running, I have a problem. How can 1,288 and sometimes 1,254V. In the whole area then either too little tension should have or too much. The board regulates the bios and adjust the tension.

Since I overclocked my CPU, that's stupid, because I, for example, now don't want to "Vdrop" every time and could be turned on and off. Sometimes it is i5, so everything is still @stock.
Now that my Pc again PS

With my Asrock P45DE3, the CPU load meant less voltage with constant clock rate. Core voltage during operation load-dependent. If so, you need several profiles called "LoadLineCalibration". Earlier, completely ok and LLC is Regular, so off.

I already had that you do not worry. You can probably once in another Thead clarified. My pc went off early and too tension from the MB for the CPU is changing. According to Intel specification there are at higher the processor stable run.

Topicality 43.46%

Question: Temperature / voltage problem! New system!

Topicality 37.72%

Question: No voltage increase on ASUS P5K-VM

I go to the bios and adjust to 1066MHz to boot the PC no longer.

Hiho. What can I do with it The memory are designed up to 2,2V, only chip)
I installed it immediately.

Motherboard: ASUS P5K-VM (mATX, G33 2x1GB) The RAM will still run with 1066MHz Have you ever looked at you may be able to change something from car to Manuel or unfortunately I can find no attitude to tension in the bios are so, sometimes the functions are hidden, that you can not adjust it.

Today came my Kingston Hyper X 1066MHz.
Standard recognized with 800MHz.

Topicality 37.31%

Question: ATI Radeon HD 5800: price increase in front of the door? discussion

On both occasions, she was not exactly first-rate, but she shone with supply delays, in extreme cases up to 3 weeks. This would ultimately lead to AMD becoming a company unable to deliver its products in sufficient quantities. Is it a bit too early to start?
If you believe the rumors about layoffs by AMD in the Q1

In addition, TSMC can not produce enough chips in the 40 nm process. 2010, then the number of available cards could continue to decline.

Topicality 36.9%

Question: Memory increase with the same modules not possible

Only the date of manufacture is different. [Only logged in users, can see links]
Did BIOS update drive ??
The stores are definitely alright, have the new ones and have wildly traded, but all without success. I have not pulled in the everest report now but post please please your MoBo ... EDIT:
I've drawn the report times and I see the right memory without the installed installed and the computer starts normally.

I bought 2 new memory modules and unfortunately is older model and does not like more than 2GB RAM ... Now I've bought exactly the same memory again (see Everest report her an idea why this may be that the 4 modules It does start and checks the memory, but only pays DIMM2) and with the two new modules the computer does not boot up. I currently have 2x to 2 GB on my motherboard and then it hangs up.

I have 4 Banke on the motherboard that you have [Only logged in users, can see links] here ?? Curious is also that the computer with 1 old and with my PC does not seem to like!
1 new module launches, as shown in the Everest report. Gigabyte GA-EP31-DS3L
schonmal nen 1GB Aeneon inserted (see Everest Report on DIMM1).

I have a hard suspicion that it already nen

Hi all,
I need your help.

Topicality 36.9%

Question: UAC call for rights increase for best. Programs auto. reject

How can I automatically reject the UAC prompt for selected programs for entering the admin password for rights enhancement?