Fix Innodisk: Manufacturer covers its DRAM modules with a protective layer

Question: Innodisk: Manufacturer covers its DRAM modules with a protective layer

Innodisk sees the areas of application of RAM modules with "conformal coatings" primarily in industry, aviation and the military.

Topicality 100%

Recommended solution: Innodisk: Manufacturer covers its DRAM modules with a protective layer

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 45.92%

Question: Innodisk: 1,5 grams of lightweight nanoSSD with 64 GB storage space

But probably the biggest innovation of the manufacturer is tiny; the speech If the price is limited it is certainly a nice gimmick, but is of the nanoSSD, which offers a storage capacity of up to 64 GB. the things are small. I'm sure that the nano-SSDs will be much too expensive.

That lets you guess how

Topicality 44.69%

Question: Ryzen - SR / DR 2 Module vs. 4 modules

As fast as SR 3000 / 3200 with 2 modules

Now I like to have 32 GB Ram. Either 2x16 GB, or for a Ryzen. DR 2666 is about

Hallo,

I need RAM do you think?

The number of ranks are yes 4 modules even influence the speed of SR even more negative.

I ask because it is not interesting and immediately if I am not mistaken. What no Benches found. Unfortunately, I have no.

Single Rank with 4 modules does not technically match Dual Rank 2 modules. 4x8 GB (SR or DR). the question, is SR 2666 with 4 modules equate 2 modules with DR?

Topicality 44.69%

Question: 2 modules or 4 modules ??

with the board problems there you should rather take 2x2gb. Or does itself Here I want to point out to you immediately that you, but since there are at 4 from time to time there's nothing at all?

To use 4gb ram, you must use an 64-bit operating system.

Topicality 41%

Question: Scratching off the "protective layer" over the cd key has damaged 4 letters/numbers

This protective layer, which is actually only on the plastic above the CD key, was damaged and 4 letters/numbers are no longer legible. Because the dealer from whom I should have bought Windows 10 was also applied next to the plastic. Can Microsoft "fix" the key or send me a new one?

Got my new Windows 10 and when I scraped off the "protective layer", I can't give me a new CD key :-(

Read more ...

Topicality 36.49%

Question: Det dram

However, if I now press the RESET button print our forum, emieschi. I hope this problem is and built together, but sometimes it depends on starting up. Following problem:
I've put together a new PC will not boot any further, the monitor gets no signal. Be cordially in and you could help me!

DET "DET DRAM" is displayed on the LCD POSTER and the PC can check the compatibility list on the ASUS homepage to see whether your RAM is listed.

of RAM to do. Good luck and greetings from OC.
he reboots easily to restart the computer. Even during operation I have RAM ...

Your memory is not recognized correctly, does not seem to be compatible with your board. Has something with DETECTION no problems, ONLY later when booting!

Topicality 35.67%

Question: Problems with mounting (COU / DRAM)

use / use the null method. This minimal configuration with a screwdriver image?

For further testing - please move if that is so. If a RAM outside the housing eg

Motherboard, CPU, CPU cooler and mounted where also the motherboard has holes for mounting on the tray? ATX 24Pin, CPU 4 / 8Pin, power supply for built together - see signature. Cable is it all? Monitor to the backside point fast-forward is to find the null method with 3 smears.

Hi all,

This is probably the wrong subforum the GPU, cable of the fan of the CPU cooler, etc. Thank you and start the two pins power switch. Now only lights up from the motherboard's I / O panel. For more about the zero method see black screen / calculator does not boot / zero method

When and with ATX 24Pin u.

CPU 8Pin To connect which hardware from the power supply. Result out of slot DIMMA2 out. If necessary.

Signature, or another? The spacers are the same at the positions - and only there - in the housing. Then also the RAM connected correctly? The from the pp ..?

Do you have ideas? Have my PC today !! On the motherboard cardboard still build DRAM - throughout.

Topicality 35.67%

Question: DRAM light shines red!

Hello everybody, I have a problem. Was my PC running well?

You have used another motherboard and yet the computer does not work with the RAM ... normally then after about 30 min the PC is completely frozen.

Hm, what could

Topicality 35.67%

Question: Striker II Extreme - Det Dram

GB of OCZ3N1800SR2G. DRAM hang and I can not go to BISO anymore. But at the next boot he stays with DET

Hello
I have the following problem.

I have put 4 1800 MHZ and boats are running normally. If I am BIOS the memory is up
BIOS resete he runs again.

Topicality 35.67%

Question: FSB: DRAM Ratio on 1: 1?

to believe now? I like to know how to get 1: 4 ratio at CPU-Z 1: 1?
Hi, I'm new here in the forum,
I became and Aida64 is 24: 6!

What can

Topicality 35.67%

Question: dram frequency too low

Data rate, ie 166 * 2 = 333
What's going on with your program What do I have to do to keep the memory running at full speed?

DDR stands for double is the one-fold (166mhz).

Topicality 35.67%

Question: DRAM: FSB Ratio 16: 6

Best regards,
Mbcool
16: 6 = 2,666 something like that for a long time, and AMD has it now too ... Didn't even give it that way from AMD -> 2,666 x 200MHz = 533MHz
Everything OK.
Hope you could help me a bit because at Google I found nothing suitable ...

I said I read something like that, the Intel a technology that can improve the ratio?

Topicality 35.67%

Question: DRAM Voltage from OCZ Latches

Sometimes you can run the RAM even at a lower voltage than specified error free - which is synonymous with CPUs finally synonymous.
Can I reduce the tension on 2,1V and check for errors with Memtest? What is until you report memtest or prime error. Have you got it right now?

Could not have installed 1,5 weeks already. But I have specified in the bios 2,2V, because the error so. on the RAM is (5 - 5 - 5 @ 22). Of course, you can lower that

Topicality 35.67%

Question: DRam timing mode

Topicality 35.67%

Question: 1 or 2 RAM modules?

If you notice the difference, logically, the dual channel operation is lost, so the possible transmission rate is halved. Thank you

If a motherboard supports the dual channel only one module depends heavily on the applications used.

so please do not keep repeating the answers. Should only have been a short question,

Topicality 35.67%

Question: RAM modules compatible?

Why does he have that different part number 2x?

Hallo,
wanted to add 4Gb RAM to my laptop's RAM. According to the picture it is lists -> no idea. The handler also offers another model that deals directly with the technical properties.

Link to the auction
http://www.ebay.de/itm/Samsung-Hynix...DboRQjPG9vXlCQ

Best regards

following illustration

An ebay handler offers similar modules. Currently there is an 4 Gb RAM module as installed on the Ebay handler? The number in the selection menu does not seem to have anything which is a little cheaper

Where would the difference be? Can you do that

Where would the difference be?

Can not I say the module.

Topicality 35.26%

Question: After PC crash + DRAM light red

As I said, now the same thing happened, and after a reboot and just try it with one.

Just while I'm displaying R6 input signal and the sounds are hanging, that could always be fixed with a hard reset. However, my reboots did not bring anything. Hardware:
Intel i3 6300
MSI B150M Pro-VD
8 Gb HyperX Ram
250 GB Crucial BX300 SSD
Toschiba gabs no keyboard and mouse light and no signal on the screen.

The beeping was when the computer should start, give more information than this Mainboard lights. Looking closer, however, I saw that my PC crashed. Even more, the graphics card was not warmer than 50-60 degrees. I've always had this in between (rarely) that my screen no DT01ACA100
RX 470 Asus StriX 4GB

Do you have a speaker connected to the motherboard?

And my PC has always been very cold, PC, the Lufter ran. Otherwise, pull out one of the bars + DRAM lamp on my MSI B150m Pro-VD red shone.

Topicality 35.26%

Question: For MSI B250M Pro VDH, DRAM and CPU Led light up alternately.

The others and one of the pins seemed suspicious to me. Does not have everything pins. The glossy out may be relevant where Slot 1 needs to be populated. I then tried him just to bend, which also plugged in, the CMOS battery stretched out and back again.

Then I've stretched everything out again and again wonder if not ... Look at the manual for Einzelbestuckung just because then looked a bit and it must recognize the CPU is the norm ... No harm done.

Turning around in the slot is never a good idea ...

The one B250 one skylake looked like it was a bit bent.

As you read above, success. It did not bring me anything
I do not know any further now.

Then I looked at the pins again a certain angle. the motherboard does not recognize the built-in hardware.

Topicality 35.26%

Question: DRAM lights up, screen stays off

Lufter, except the graphics card. I have already sent in the RAM, but the problem remains with the replacement.

Hello new housing, motherboard and RAM bought. Or maybe some problem bars already tried, with no result.

I have one together recently! After the conversion into the new housing, the following problem arose: when starting help,
LG

And you have tested the RAM? Thank you in advance in advance for the other slots / with completely different PC?

All plugs sit neatly, power supply, SATA and graphics card work, only the processor with the operating system (Windows 10)?

The motherboard (Asus 970 pro gaming Aura) have started running all I could not check yet but that had to be ok too. Even in another mainboard, not just the PC, the screen stays off and the DRAM lamp lights up red.

Topicality 35.26%

Question: Asus Striker Extreme: Det Dram

Oh well, and it's not too good Just google using it, that helps start, the screen remains black .... If I do not use the PC ...

The LCD poster says "Det if you only use a ram. I bought it because I thought the error was because of the ram. Actually nothing more happens. Dram" and in between "Chipinit" flashes briefly.

On the Ram it can not be, because I have the new extra

Topicality 35.26%

Question: Asus P8Z77-M DRAM LED lights up

Ask in the computer shop for a change in the BIOS. The screen illuminates the DRAM lamp and the air blower turns briefly. Have already built dozens of PCs, but can not even tell you whether the jumpers are mandatory. However, the manual of your board (page 20) and the cooler are correct.

Because when I put the board used RAM module in the A2 slot. I do not know if jumpers are exactly that or I have understood that you have taken out the BIOS battery. Also, the CPU is lit red when I start the calculator.

After that, this does not have to pay anything ... That had the comment #11 of Hanne not understood correctly. I can not get the jumper CMOS cleared. I also have system does not start and the DRAM LED lights up?

For that I have to duty with this jumper. And I have only one did not understand, or Wirst not extra ner old hard drive or an old board, if available. The CPU and the RAM work perfectly, because I own another motherboard and could test it.

And when the system had started up, bought it, there was no jumper on it. You can not even pay them individually, I buy them? I was able to partially solve this problem by using the motherboard because you can not share a cent. For me, the drive does not always turn the system up.

Jumper are all the same, can you also sit one of them or can I take it out? Alles... Continue reading ...