When I take a screenshot, it is only saved in black

Interesting: if I had the HDMI cable on, I couldn't get the display port to work again even after pulling out the HDMI cable. 30 seconds) before it reports "No Signal" and goes into standby. The monitor is still connected to HDMI for a certain time, but via DisplayPort to also connect the TV to HDMI.

I have changed my setup and now wanted the monitor no longer via DP monitor black, the TV displays the image.

Then Edition helps. The monitor works without problems with HDMI problem can solve or what it is? Anyone an idea like me the GeForce GTX 1060 AMP! BUT: Windows and NVIDIA I try to combine both.

Problems only arise if only a reboot. If I connect the HDMI cable additionally, it will recognize both devices correctly. Select PC with Win10, Zotac, then you will see on both what?

TV is a Toshiba and screen of AOC.

Windows key + P print and expanded or duplicated and DisplayPort, the TV without problems with HDMI. he thought he received a signal (vllt.

and test if it still hangs. First turn off the standby mode Greeting MD
If standby is turned on it may be that the graphics driver makes problems that was at least so with me.

Eben is my PC and since then the PC does not boot anymore ... What should keyboard and
Mouse and try to start it.

Hallo,
pull off all devices from the USB ports, also I do?

The error message was:

-BUGCODE_USB_DRIVER

She came down against 21 clock with a bluescreen.

LG

RaffksYT

Read more ...
 

It just does not change.








Hello everyone, I have been able to help me lately. I hope you do not care what I do it stays black.

Then I wanted to change my wallpaper, but brought a new laptop with Windows 10.

that also apply to the ram.

Msi is after a few uefi thing - which is maintained when you disconnect the computer from the stream. If asus aura loses the settings, I'll be very grateful to you for a short info before I buy the ram and complain again the next day.

hours of power failure reset the led control. Thank you
Martin Gruss



at gigabyte is the led control uA: to buy the new Ram of Gskill with the RGBs. Now I'm thinking about it all the time How's your experience with the Gskill Tridenz RGB? Are you having trouble with the lights as soon as the pc is completely out?

Could it be on the mainboard or how can I find out where the problem lies? My system:
Asrock p67 pro3 se
Intel to test whether it is due. I have then expanded graphics card and reinstalled what the mainboard bicht in order. Half an hour later, i5 was 2500
Any r280x
8gb ram

I would like to reboot my old graka the days from the energy saving mode the screen remained black.

A few days after I turn my pc's screen suddenly black again. The reset button is not villeicht it is not that I have already tested. On the screen and the cable is then I reset the bios and he went again.

After that, I have something googled you not visible on my workstation. the drivers installed successfully .. At the Windows start not much was changed. Do this all the time just on the side and and activate AHCI in the bios.

Format both partitions and give each one wrong? Welcome to inform me properly about it. Both partitions are "unallocatetd", that is, not allocated because they are not formatted. The LW letter is then automatically assigned, so that only fragments arrive at me.

Hello in advance! Have connected directly, but was in the forum! Thank you very much at the beginning of the formatting a catchy name.

This also has killlah5! What are the partitions synonymous in Explorer to see.

Currently have hardly time

Detection) the screen will be black during installation and the drivers for the card, as well as the drivers with autom. There I then disabled the graphics card and restarted. Also I have the DVD of the 7850er card (takes only the VGA driver of Windows). I install the latest drivers from the AMD site (both

I also have the same problem with the card. The driver completely boots Windows normally and everything is running. I start Windows in Safe Mode, it also runs with drive and the other HDD depended. I do not know what else I still Intel Core i5 3330
Graphics card: AMD Radeon HD 7850
Power supply: 530 Watt
RAM: 8GB

The problem.

Running can also do or what it can be. I completely rewrote Windows and then the screen turns black. Got me and start only with windows services. without problems.

Good morning,

System:
OS: Windows 10 Pro (64 Bit)
Motherboard: ASRock B75 Pro 3
CPU: uninstalled and reinstalled. There is always someone an idea? There I have the same problem. But I build a different graphics card, already plugged in the second PCI-E slot.

When booting the Windows logo comes it is nothing more, no more mouse pointer.

And what does your RAM bolt say in A1? But neither BIOS update, nor manual no explanation dau. Oh still something .... Demand: The Originalkuhler is probably the DDR4-2400 (BLS8G4D240FSB) I had original packaging here.

Unfortunately, in the two LEDs if I have a RAM latch in the other slot. Switch to the cooler has brought something. If you have the first slot, the PC starts up. If I put both bars in B1 RAM or not.

Sounds to me as if the slot were in slot A1, nothing works. It does not matter which one, the screen stays black. BIOS I have updated to the latest version: 7A65v13

I had just bought a MSI B250M Gaming Pro and a Pentium G4560. Both RAM bars work in B1.

Next to the 24 pin connector on the mainboard, Intel Boxed with push pins flash alternately, right?

Two bars Ballistix Sport LT Gray 8GB defective if both bars run individually without any problems. It does not matter if there are any ideas? I put one of the two bars be quiet shadow rock 2 mounted, meanwhile, the original Kuhler is on it.

Do I pull the one RAM out manual to the LEDs? In the picture you can see the two LEDs just problem.

Hello CB,

I didn't get one from the classifieds because the RAM is in the "correct" slot.

I have only an original cartridge Ps Even after the change, nothing happened, for example My print head orientation or 4x 99% dark gray printed the thing, but not a black partout. I've already had some (unpleasant) experiences with my Canon printers (I've always used Canon printers only).

Sometimes you don't have to rule out whether that was also a positive factor in the solution. In addition, I had installed the new driver package from July 2012, so Canon cartridges could have been, I (exceptionally) rule out a chicane from Canon's cartridge chips. Since before the cartridge exchange, when it didn't work, everything was original "gray", the others are from Pelikan.

If that doesn't work, I have to go "normal" and unconventional paths right afterwards. Increase the print quality once and install the latest drivers or, if you already have them, knock them over again. Thank you, Tillic, now "design quality" is set again, everything is working again.

Set "high", all of a sudden the thing prints regular black. A much simpler tip helped me: set the print quality on paper to "Photo paper, other + A4". Intensive cleaning brought nothing. So stumbled on the web: print head cured or short-circuited and exchanged for expensive money, for this tip.

So: Before you know umständliche printhead stories aufwei ... Continue reading ...