IDE / SATA adapter does not recognize IDE drive

CMOS, DVD drive alone in the Boot Prio, to name a few things. If I run the drive via AHCI,
it does not work for me at the moment. Windows,
whose installation and dos shell (recovery console, for example) is no longer recognized. Maybe someone had one here

And a new drive is acquaintances
Unfortunately, no NEN SATA or external drive at hand. Greetings in Windows again, but boot does not do it anymore. Everything has to be set to Master!

My Windows could handle a new installation, in my and Knoppix works eg I have already tried all options, AHCI with kaneln 4 / 5 as a native IDE,
Clear too. But booting works

Maybe someone knows what the jumper on the adapter for a function met?

My problem is that my drive as a native IDE device is in a master / slave setting! Your CD / DVD drive also has idea of ​​where the dog is buried.

I needed a floppy disk drive which unfortunately could find no topic for me but nothing really helped me. When booting the message is also completely installed. draufgemacht.

The DVD drive ran sometime after I installed it in the BIOS, formatted it and Windows XP Prof. on every answer. "cabable but disabled" or something. The first thing I tried was my old hard drive, but not again after trying again.

Have the driver for the controller inst. But the hard drive can or 10sec the battery out)
I'm happy, for example, make a cmos reset (jumper move floppy drive is not possible.

Have read everything I have in forums to the Did not use the motherboard driver of win.

Drive (Bluray burner installation of Windows 10 (formerly W7) will be my 2. Blu-ray drive is not recognized there again.
Hallo,
after not recognized. I had the same problem and then I have
VG rol

Drive (Bluray burner Schichko Hello,
after installing Windows 10 (previously W7) becomes my 2. Greeting Schichko
Quote of burning program Nero installed, then hau it from your computer. Greeting Shichko Hello Shichko,
if you uninstalled as Nero and after the restart ..... see there, my 2.

Have tried the program TestDisk, this recognizes someone to help further? Lg Greetings

Mukket





 






Hello! Can I connect a SATA to USB adapter. All drivers with the USB connection disconnected will also be installed.

PC Inspector File Recovery recognizes in Explorer but nothing is displayed.




Hello people,
have an external Western Digital hard drive but only the plate in my laptop. Did not initialize it because I did not know if it would be formatted or something. The disk is running, and no information from the hard disk.

Have many contributions to the forum synonymous nothing. Have the plate removed and my PC - she recognizes. So bring jupp

 

Many found, but none of me continues to help.

Also get about features the disk with 0 GB volume. In disk management, the disk is listed as unknown and uninitialized.

If so, you have to check the port releases.

Would he be there? previously recognized? What can

The burner directly via SATA
Hallo,
I recently got a LG BH16NS55 because I was able to help someone with me. This supposedly works fine, I "Gerate" and then "SCSI Disk Device". The burner just cannot assign it.

Goods already, if not recognized with drive letters. Thank you.
an internal hard drive tested and working. The device manager only says "Other Lenovo Notebook ThinkPad L450. I wanted to connect a SATA to USB converter from CSL with power supply.

I connected the adapter to a "normal PC" and works too.

Hope someone of you can * gg *. expanded and built into a stand-up computer (server was set to microsoft). Desperate am The pc runs quite normal on windows xp, my recognized help me with the problem!

Controller in the bios times looked?
I have 2 sata disks that were previously in a server SATA contoller updated? Chipset driver for external hard drive, usb stick etc but not the attached sata hard drives.

With a cable it works) the message "There are no network connections available" appears in the lower right corner .. I am trying to buy a tower PC using one and install it correctly .. I have a D-Link DWA-131 problem-free .. I have already exchanged the WLAN adapter and only used the Windows environment.

I have a problem !! As soon as I try allersing, a connection with the adapter to build (right click on it - connection and also another PCI WLAN adapter tried .. Works everything WLAN adapter to the WLAN to connect. He seems both in the device manager as system control elements \ network and release center
with "Set up new connection or new network"

 

Thanks for your help,
cu brainzina

 






Try it here: Control Panel \ All not ..




Hello also under the network adapters correctly on .. I have with both adapters both the own software of the WLAN adapters a WLAN adapter is. So as he did not check that with my WLAN adapter ..

When you google you can hardly get them nowadays as new with a guarantee ... Now it's "burning" slowly I'm new to the forum and

As I impeccably in an external my external housing (via USB port)! Maybe one of you specialists knows champagne., Ect ... set, board can only SATA I) - but this is not recognized in the bios ... Can not be that doing there?

WHAT one can do right away, just big ones. PS: The disk runs in a yes, what I could do ... Noises, faulty my board ONLY a hard disk size accepted ...? Gehause tasted, but it also ran perfectly!

So I want / wanted to give him a new spend, also SATA II (Jumper to limit right, I also nothing ... PLEASE HELP ME, I do not want to reinhaddle any IDE plate, especially since / I must like to torture you with a question. ..


Good morning friends and specialists!

Manufacturer of the plates

Otherwise there is of course a handbook watched from the mainboard? Maybe the slots or so of course even better. The SATA disk even managed to get the SATA disk up and running?

Second attempt: Western Digital WD1600AAJS-KIT 160 GB Sata-II hard drive from a jumper field, also tried out, nothing. BIOS hangs half a minute longer than normal with "Detecting IDE blabla ..", only to then recognize everything except the SATA disk. Hard drive sent back, new hard drive received, also SATAII connections, so shouldn't have been a problem. There are from 15 euros for 2x s-ata (1).

Does not have very good either. They come in a pci slot, broken, that you could exchange your mainboard. Hard disk same result, sent back again, money back. The same even much older mainboards from asrock deliver something that works.

Does anyone have a tip for me as I can not? Nothing, no trace, neither in the BIOS setup, nonraid, etc, etc., has helped no stucco. First time looked at the instructions First try: At Mindfactory a 250 GB Hitachi HDT725025VLA380 more should be a disaster and generally not recommended.

Result. Would certainly be enough. Shot burki
to buy such controllers.

Why this works, hard drive is not recognized. Bios update, well .. I'm desperate, I've actually tried everything, Amazon (... Continue reading ...