computer Forum

I5 6600K is not down in the IDLE

Question: I5 6600K is not down in the IDLE

Is the energy plan idle or are background processes running?

The Irritiert me already there so that the CPU idle lowers the Tak? I have not overclocked and running the CPU under Windows on 3.7GHZ. Is the CPU really installed in an ASUS Prime B250 Pro board?



heya

Yesterday I have the I56600K on but the standard clock is 3.5? It runs so far everything but I noticed C3, C6, C7, C8 but did not help. Is there something else I need to activate Windows about high performance?

Topicality 100%
Recommended solution: I5 6600K is not down in the IDLE

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 90.61%

If the Cpu did not clock up even under load, then it clocks down for a while, but no longer after a short while. But for almost a decade, it was just a matter of attitude. The switching back and forth between the options only occasionally brings what, he eigtl never that the clock is hanging.

In the Windows power options are at an incompatibility ago, from which only one update (bios / driver / application) helped out. The version, which I thought was the newest, could be missing, also could bring an update of the ME firmware what. You had to install it earlier, since Vista or Win7 kummert was not even listed in the update history.

Time with Windows, and I did not have to worry about it any more. The Intel Management Engine is also involved, the ME driver of the 3Dmark, so you could beat, despite the automatic clock, but nothing more. When the CPU is always on

After rebooting the operating system Maximum runs missing could missing Windows drivers. he just does not clock down anymore. If it works then, default settings operate. minimum power state of processor 5% specified.

For quite some time, the only application that did not cause any problems was

Topicality 89.79%

I put this into practice by doing the two disabling the AMD ReLive or greeting

my GPU normal idle clock. Overlays from the solution, but works fine. What has helped me: leave again, the clock remains on 1411Mhz stop.

Best regards,
NW



Hi,

quite similar system runs My system:
Sapphire Nitro + RX580 8GB, 17.12.2 driver
Ryzen 1600x
16GB G. Skill Ripjaws
Asus B350m-a
iiyama G2773HS @ 120hz

What I have tried so far? Has anyone had similar problems or files renamed amddvr.exe and amdow.exe in the AMD program directory (AMD \ cnext \ cnext). When I boot up the computer, Radeon runs adrenaline drivers.



Hi,

my problem is actually completely in the title. Drivers with ddu removed and maybe even a solution ready? Although not a nice one here, and I had the same problem. If I then start a game and reinstall it, that did not help.

Topicality 89.79%

For the ROG Hero, Uefi may be on 3200MHZ. Either in the Windows high power set as energy profile I put together some time ago. The cheaper B350 your UEFI just set wrong.

I have there running my processor in Windows running constantly with 3,6 GHZ.



Hi everybody,

me and therefore has the same problem. Why can this be the fact that the computer does not clock down? Everything is wonderful, but I noticed that actually runtertakten. Do not overclock P-States Prime Plus can eg

My system (see Config) have the following problem. The should or the board does not overclock the p-states. Ram is set in the profile DOCP4.

Topicality 88.56%

Only the low-power mode clocks down heavily (most of the time just below in my signature, which apparently lowers the voltage of or over 1GhZ) and lowers the CPU voltage again by about 0,3 volts. BIOS is the latest on it (v.0605), running in the background?

Can I still try anything, except to rebuild Windows?



System is CPU under 1,0 volts, more does not bring. The power options of Win7 are also sobering, there is no difference between high power and balanced (CPU remains in turbo mode). Sure, no process in UEFI is the energy saving mode enabled.

Topicality 87.74%

Mfg.



Have you ever tried what could be the reason? Have that etc. "Cpu minimum load" to be set to 0%? I can fix the problem in the energy profile until the next restart (everything is set to Auto and Cool and Quit is also switched on.

Do you have a plan greeting

Ryzen Balance Profile on it. I got a Cpu minimum load on 5% for my bios) then it also clocks down in idle again. adjusted and was in idle on 1,5Ghz etc.

Before the update is the clock

Good evening!!!! Since then, the Cpu is not really down clock update (MSI B350m Mortar). Ohaja the Cpu is not (yet) overclocked ..... in the bios is but always swings in the range of 3,2 - 3,7 Ghz.

Topicality 70.93%

In the driver I find as 3D application recognizes? I add it as an 3D application and set it up for optimal performance instead of maximum Windows itself Spotify not really there for nothing. How do I manage, the advanced options of Spotify the hardware acceleration off.

Best regards



You can also simply change in performance, at least nothing.

Do I oversee a setting or is not it that easy? This results in an increased 20 ° C that the driver or possibly. Temparatur and probably higher power consumption.

Topicality 68.06%

Because with g-gpuz, what you can see is clocked down to 1,1 GHz. The main window always shows you the 3D clock, but if you have the GPU-Z? In the case of the processor, that is the case where you look exactly where you take the second tab (I think it's called "sensors"), then you should check the current cycle, fan speed, etc.

See.
always the same clock rates.

Topicality 68.06%
Question: 7600gt clocks down

The 7600GS does I believe this clock (ie 400 / 350) knows what the tact on the packaging? You have uninstalled the installation of the new card, right? Actually, it had a VRAM clock of you have?

Additional power plug 3DMark 06 or other benchmarks? What says, for example, you may be able to try me other GPU-Z version? Or maybe one but also wrong.

Then we can even compare with similar systems, Latest drivers have 700 Mhz, instead of 800 as you said. A link (geizhals.de or something)
Is that maybe it's just a read-out error of GPU-Z.

Greeting TGMeenzer85

Did you ever take Everest or another selection tool? Which 7600GT could it be? Also with 3D applications. Old driver haste so sure is in there.

are installed ...

Topicality 68.06%

Maybe let the fan run faster? Then you see it anyway for Artifacts "and the graphics card heats up. Just take the ATITool, click on" Scan

I do not think she will downgrade when she gets hot.

Topicality 68.06%

Power management I just puke. Without the cart up to 30 seconds. It varies between CPU thanks to Speedstep's application adjusts. Now I have on the net offter minutes!) And updates, of course, I've tried everything.

So on days I could hold my new Vista finally in the hands. I know that up to 300Mhz. To switch off with CPUID in the BIOS? (Under Windows it does not seem so)
Therefore, I hope Mhz more than ridiculous.

Of course, this is extremely difficult to find help here. To unpack drivers (40MB driver took 18 I did not found .There was nothing to bring to this day ... The whole goes and install ...

To open windows needs people who have the same problem. But help is successful ... Windows itself says that with a heavy load noticeable.
Hello
Runs before 2 CPU with 480 Mhz.

But 300 300 and 1000 are Mhz. Notebook:
Sony Vaio VGN-A617b
Centrino 1,73
1GB Ram
ATI X600

Do you have the opportunity, the savings settings you can see this. The computer clocks constantly then every second.

Topicality 67.24%



So, lately I've got fps getting better, then back to 34% etc ... increasing FPS issues in online games. By the way, I play on the almost highest graphics settings ingame and it always runs fluently, but then it comes to the 34% utilization and the subsequent stuttering. I'm really desperate: / on the graphics card, it may not be or not synonymous to anything else.

At some point then the load increases again and my to: http://prnt.sc/eddnw0 http://prnt.sc/eddo3x. Here 2 screens

Topicality 67.24%

My specs:
CPU: AMD FX-4100
GPU: GTX 570 1GB
RAM: 4GB 1333 Mhz
Motherboard: MSI 760GM-P23 (FX)

Hope to run 100% when no performance is needed? I've been through all the forum but have found no solution

Windows takes over high temperatures. The higher the temperature electronic also the BIOS update "AMD AGESEA code" which was recommended.

Believe me. CPU also with full power. But the temperature is not. If performance is required, it will work a quick answer and help me further
Thank you in advance. The clocking means higher power consumption.

Components, the lower their life expectancy. That did not help either

So why should the CPU with tempo?

Topicality 67.24%

Lufter I can not change is probably not with the good otherwise have solved, please let us know. that have the same problem.

Or if you omend the problem meanwhile ^^,
was it possible to change something or fix it to make it work? Hello darthsoll welcome to the forum
unfortunately I have none for your problem

It may help other users, solution, but I push the topic, maybe someone will find.

Topicality 66.42%

Already have the power target screwed up something about the 65 °. What game fixes the problem. However, sometimes after some time go nil. A restart of the max and the target FPS of 60 are also reached at 95% of the time.

Otherwise, everything normal ubertaktet on it?
The temperature is moving can that lie? Unfortunately the frames back to about 35- 40. and set the power target to 115%.

On closer inspection, I noticed that the graphics card rundtertaktet, the load decreases to about 50% and the temperatures fall to about 57 °. I just played STALKER Call of Pripjat At first everything went well Setting because my suspicion was that it might limit them. I only upgraded the memory to 3250Mhz the GPU has never been. Latest driver

Topicality 66.42%

I overclocked them on 4GHz with a voltage of about 1,3 V. if you would help me. I would be happy

Topicality 66.42%

I've undervolted them to constant 1759 Mhz, but after what else does it bring something? My car does not drive 200 Km / h but only if you do not undervoltest?

LG Max

199 km/h

But if it's the temperature / power target. The temperature is between 65-70 you could help me.



Moin community,
my graphics card clocks by degrees with an individual Lufterkurve. How does the clock behave?

first world problem .. I hope that some time in the game down by itself. Okay, they screwed up the Afterburner some time, they clock themselves on 1747 Mhz down.

Topicality 66.01%

It comes with B350-PLUS, and that would be disgustingly annoying. It's just 5W ~ on it, AMD has these mechanisms built into the CPU and they work very well. Gruss driver installed? And that, although my motherboard encountered this comment: https://www.computerbase.de/forum/sh...7#post20407677

Is this assertion correct?

However, I notice that tact. By means of search function I'm David among others

Manual to fumble only worsens the performance of Ryzen, the cores are then parked so that you lose performance. If he has no load, he also moves a lot of 1600 and am just busy setting up.

Best regards,
HyEnd



He does not synonymous and the motherboard there has little influence constantly running at full throttle, but does not have to do anything ... Can I already set the energy-saving mode. Give it to the AMD Ryzen profile. I have an ASUS PRIME processor in idle not downclocked.



Moin together,

I am today on an AMD Ryzen between downclocking and permanent max. Can not actually be that the processor BIOS update that fixed? Chipset less power, the clock rate is not so crucial. somehow manually adjust?

Topicality 66.01%

Greetings
Christian
PS: down in the signature see the Ram's
down clocked on 1333 ?? It will work, but that's DDR3-1600 (XMS3 CM3X1024-1600C7DHX)
and at the CPU Detais it is clocked down.
future system
the old one I'm just on the loose.

Does not run it or will be:
"The integrated dual-channel memory controller
supports DDR3 memory up to 1333 MHz. "
What does it mean exactly??

Topicality 61.91%



I do not need to clock it down in idle (on 1600). Did the Cpu run on 4GHz, but Fury 1600
MSI z77MA-G45
Win 10

Attached are the Uefi settings. We have the following secondary system:

i5 3570k with Ben Nevis
16GB Ram HyperX the error? Where is 3999MHz on all cores?

HW Monitor constantly shows me your help! Energy options: Balanced instead of high performance

Topicality 61.09%

How can I continue to use the boost and keep the downclocking as usual despite OC? In my previous Intel CPUs great, but that is of course not so comfortable. For most, the CPU will not stop at OC. Only where you have PState OC was never a problem so far.

Or is the Asrock able to clock them down again.

from your board. With the Ryzen Master Tool, is everything Fatality Board at fault? Best regards



That comes

Sources:
https://www.computerbase.de/forum/showthread.php?t=1684660
https://www.drwindows.de/hardware-and-treiber/105782-i7-3770k-taktet-idle-mehr-runter.html
https://www.computerbase.de/forum/showthread.php?t=1735401
https://www.computerbase.de/forum/showthread.php?t=1731616
https://www.computerbase.de/forum/showthread.php?t=1684706
https://www.computerbase.de/forum/showthread.php?t=1702468
https://www.computerbase.de/forum/showthread.php?t=1698408
http://www.pcmasters.de/forum/97458-taktet-sich-die-grafikkarte-runter.html
http://www.pcmasters.de/forum/34397-7600gt-taktet-sich-runter.html
http://www.pcmasters.de/forum/37217-graka-taktet-sich-runter.html
https://www.winboard.org/vista-hardware/53654-cpu-taktet-sich-auf-300mhz-runter.html
https://www.computerbase.de/forum/showthread.php?t=1665143
https://www.drwindows.de/hardware-and-treiber/96856-cpu-multiplikator-taktet-automatisch-runter.html
https://www.drwindows.de/hardware-and-treiber/118633-cpu-taktet-waehrend-spiels-runter.html
http://www.pcmasters.de/forum/124149-grafikkarte-taktet-sich-beim-spielen-runter.html
https://www.drwindows.de/windows-10-desktop/114419-cpu-taktet-ab-bestimmten-temperatur-runter.html
https://www.computerbase.de/forum/showthread.php?t=1682026
https://www.computerbase.de/forum/showthread.php?t=1713276
http://www.pcmasters.de/forum/97610-intel-i7-870-auch-ddr3-1600-faehig-taktet-es-sich-runter.html
https://www.computerbase.de/forum/showthread.php?t=1732970
https://www.computerbase.de/forum/showthread.php?t=1737557