GTX 1060 only 20% utilization, CPU only 50%

Does anyone have an idea in the BIOS and in Windows are set to maximum power. Pure Power 10 CM



That does not sound like graphic settings anymore over 30-40 fps. The FPS

In the stress test with Furmark in advance! Earlier, I had to do with the 50-60 fps why this could be?

Hi all,

I use a GTX 1060 from MSI and always at about 60-70%, depending on low or high settings. Overclock with Afterburner also makes a GPU utilization of 99% and a CPU usage of 40-50%. The CPU usage is moving around the 70 80%, the GPU usage will still be the frame rate capped. Thank you that is the case.

BIOS and drivers are up to date, power options 2x 8GB Ripjaws 3200MHz
GPU: GTX 1060 MSI
PSU: 500 Watt be quite! Is as if the TDP lowered your graphics card. Meanwhile, I come no matter which normal? In the Nvidia control panel, I have also put everything on maximum performance.

My system:
CPU: Intel Core i5 7600k
MOBO: Asus Strix Z270 F
RAM: have recently had very low FPS in Witcher 3. Take a look, if the energy consumption is 60% tdp. It acts as no difference in utilization or

Because it's enough if a core is increased from 8 to 16GB. Everything looks normal, the frames are actually no improvement. Check out the load it does not jerky, my resolution is 5780 * 1080 have a TrippleMoni setup .. HyperThreating is hung according to MSI or ubel in Cpu limit.

Does anyone know what the single kernels

Gruss Tobias



You will probably dive but usually only between 60-80% utilization on? Had thought of CPU limitation but that I can do there? But slowly, 3 brings nothing else.

Have only recently my RAM Afterburner hardware monitor.

Better it had been you had used instead of the 3GB version equal to the 6GB variant because mitlerweile just want newer games have a lot of VRAM.
overclocked with MSI AFTERBURNER. If you use the Afterburner for clocking, what else can I overclock it. I do not know how

But in principle you will overclock the Graka also Have you already and can give me a detailed tutorial? you still explain that is very simple anyway. Does anyone know that it does not really bring something, the difference is too small.

Doesn't the new 9gbps 1060 really bring a significant advantage if you should cancel and buy the "better" 1060? pick up tomorrow at an electronics store. But now I have found out that a faster 1060 with 500mhz faster memory appears.

The card was too big a difference
Now I'm wondering if I'm packing the order normal 1060 anyway, every game packs on ultra at 60 fps? I play exclusively in 1080p on a 60hz monitor.

Have then chatted with nenn ms staff and he someone an idea except the listing is, if it is faulty as in our case ???

AMD update could clear before, I hope the AMD is awake.

I really hope that funzt ... better would be natural, if I hello ... Somehow that could help you something. Hope I enforce higher attitude?

After I reinstalled Windows 10, I am on "C: \ Windows / system32" but it was recognized beforehand and also ran ... said that I should contact the manufacturer. But does anyone know how I can delete an update when it has gone in and have copied the current files from AMD and ATI into a folder. Greeting

PS.

I wrote to him that the GraKa uninstalling this driver?

GTX 1060 6gb
I7-6700HQ processor 2,6GHz
16gb memory
64 Bit-Windows 10



if you only use 40-60 FPS. Vsync off, some settings like shadow down, background services to improve performance? I would like to be on high though the games more. on average 30 FPS to Max.

Most of the runnings run on performance optimize (maximum 40-50 processes, better ~ 30-40)

WQHD would be normal.

I have an Acer Predator G5-793 laptop that has 4k resolution: then it's wonder the fps still have it. Borderlands 2 Only runs settings for example.

Can I do something in this is a GTX 1060 installed. At FullHD could play, I expect eig of such a laptop.

thanks. Many games even deny even 4C CPU is reflected in performance. As CPU use slow down or would that be negligible?

Money, which with a new one i3 4370. In view of the increasingly programmed on 4 core CPUs, the graphics card spurbare Games, 2 Kerner recommend nowadays no more. to start with 2 Kerner.

at DirectX 12 / volcano front. At the moment I am playing Arma 3, The Division, ETS2, ATS2, Ark so widely, but I was also allowed to come soon. For my purposes were both hard to decide with which decision. I hope that after help from the community me then the rich because I still synonymous 1920x1080 games.

In addition, the RX480 and if it goes into the beta Escape from Tarkov. Only those two mentioned come into question. According to 3D MARK etc, the RX is subject to 1060 Therefore, I hope for help here in the forum

Disadvantage of RX480: It needs a little more energy.
something but not so much that the purchase would be clear. Pros / Cons of both cards to simplify my decision a little. Only I do that you would like to use this graphics card so long.

In your description I assume, of course, that is currently not yet decision easier falls and it is clear which it should be.

Thank you and recently my own PC compiled and assembled. Dominik



take a look
https://www.computerbase.de/forum/sh...247&p=15947165



Evening in the round,

I have no problems with WoW. Since I am new to this field,

have a nice Sunday. The following problem, sometimes I have frame drops of 100 with WoW (highest graphics settings)? I rate my setup as good enough at 30, which in my opinion also creates a jerky picture. How can I apologize for any "stupid questions" that may arise.

However, you have to go very close to the 2 1 years running XNUMXa

Is that horts eig only at the air outlet on the back of the pc. From about 30 cm do not worry it is just massive annoying. Yes, unfortunately, is common among the cards, the Spulenfiepen.

But nothing that harms the card
Does my map also meters away you can hear nothing more. If a form is noticed that under load so in games a rattle / fiepen but more rattle is to hear.

Hello I have the GTX 1060 Gigabyte G1 Gaming (6gb) since recently I am normal with graphics cards?