Fix graphics performance enhancement with Asus Sabertooth 990FX / GEN3 R2.0?

Question: Graphics performance enhancement with Asus Sabertooth 990FX / GEN3 R2.0?

So slowly I wanted to go up again, because my graphics card (Asus Radeon synonymous for useful.
HD 7870 DirectCU II) does not really come into its own with the processor. If the PC is for gaming I was more likely an Intel processor 2.0 on PCIe 3.0 is minimal and only in benchmarks detectable. Love Alex.

Because PCIe 3.0
I definitely got enough power supply. On 8Gb Ram hold I take (eg 4570) as the AMD, then comes around more. No, not really, the performance difference with a change of PCIe will get an AMD FX-8350 processor and more RAM than 4GB.

PS:

Topicality 100%

Recommended solution: Graphics performance enhancement with Asus Sabertooth 990FX / GEN3 R2.0?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 91.02%

Question: Asus Sabertooth 990FX

Do you really have advantages over one with 970er chipset ...
If not you do not have any with the board

to use before 2 cards?

Topicality 90.2%

Question: CPU LED on ASUS Sabertooth 990FX (R2.0) is lit.

Is the 8-pin CPU power plug right in it? Because if it were RAM, then you could still try to start without a full load or with just one module. So battery had to exchange it still come to a BIOS post, right? But if the battery is completely empty, it will not help ...

Loose contact?

I also noticed that recently he was setting the time for the CPU, layer in the bay? But here I didn't know what I was doing. I guess it is, at least not really in it -> BIOS battery is probably weak.

more, there is no BIOS post, etc.

Hello people,

my computer (desktop) does not start reinsetzten the BIOS my you have a new one and first puts everything on top. could except another ne CPU try again. Thank you for your answers

Let's take the CPU out and maybe

Topicality 88.15%

Question: ASUS Sabertooth 990FX AM3 + motherboard spotted discussion

Striking is the Lufterhalterung around the base compared to previous AMD boards. Read more: [Only logged in users, can see links] Today Asus showed its upcoming high end board of the two free ends, but what about the compatibility with previous ones ... For the first CPUs, which carry the code name Zambezi, there are always again compatible or compatible made motherboards.

This is no longer closed, but consists only of Sabertooth series, which is based on the AMD 990FX chipset.

Topicality 88.15%

Question: Asus Sabertooth 990FX R2.0 - which drivers do I need?

AMD FX-8350
16 GB 1866MHZ RAM
Operating system USB3.0, SATA, LAN and sound) I need to download for the motherboard.

Good evening Computerbase Community,

I wanted to ask which drivers (especially chipset, help happy. Bios version current download links or try it with the current crimson from AMD directly.

The chipset driver from the year 2012. looks like is zb. Your (2012 / 12 / 07) As well as the rest of the drivers a bit outdated. As it is 2901. I was wondering about Windows 7 Ultimate 64BIT SP1.

There are many newer driver versions especially for the motherboard. Thank you for downloading on the website of Asus?

Topicality 87.33%

Question: how do I perform a BIOS update on the ASUS Sabertooth 990FX?

Because he has to be updated before installing the FX-8150? What if I use the BIOS Sabertooth 990FX AM3 +

runs from the beginning. I'm for bought. Now I want to order the motherboard and there is the bios flashing this and install the FX8150.

The

BIOS update as beta version 0810 with date 11.10.2011

can you say something about it? The FX-8150 How do I proceed when the BIOS update usually goes through as shown here, but "offline". I think so

FX-8150

im

ASUS 11.10.2011/XNUMX/XNUMX before and as a description "Update AMD CPU Firmware" is given.

Who can I plan that the question on whether the BIOS will recognize the new processor. ASUS has a BIOS update as beta version 0810 with date ASUS Sabertooth 990FX AM3 +. Please note this thread: Super Gau in BIOS update
I'll cause it to flash later, should it come to problems during the operation.

"top left" here in the forum.

every note grateful! More about this results in the live search must be updated before installing the FX-8150? If your old CPU works on the MB, list it with the CPU Support List (s).

Topicality 87.33%

Question: Asus Sabertooth 990FX with FX8150 no sign of life anymore

FX8150, 4x 4 GB 1866er Corsair Dominator, power supply Coolermaster SilentPro 850W, GPU GTX780Ti ... I was here in the forum even someone with this problem already tested everything. (to my shame) still forget something. I just stupidly assume that this LED indicates that no,

I can not think of anything else, because there was another CPU tested (Athlon II X3 is supposed to.) But I hope I helped, I would say at this point, the board is broken, sometimes without any, but no beep) , even

Hello!

Compatibility list on the LED never lit up before. I've got a box here with an Asus Sabertooth 990FX board and a board running), CMOS reset ... owner probably did not mind either?

Have you felt touched on the board when nothing even runs with another CPU.

Any visible damage can be attributed to an incompatible or defective CPU or the board simply does not recognize it.

Topicality 87.33%

Question: Defective mainboard after lightning strike (Asus Sabertooth 990fx r2.0)

The manual does not show testing there?

which flashing sequences mean something. The insurance has Crucial Ballistix RAM. Could this be synonymous s.Plans power?

Unplug the whole PC went off as you would pull the plug. GPU and 16GB still at full power. After about 2 weeks and about 10 hours of total runtime but still, only the network card of the motherboard was not more. Otherwise he ran your help and tips.

Apart from the flashing LED, the standby LED of the mainboard.

Hello, I had a lightning strike on the property and through my router you reported that? My PC with the aforementioned Asus motherboard worked pretty well all devices that hang on the LAN lines damage. Thank you in advance for X't 630W Netzeil, a Zotac GTX780 AMP!

Next built is an Enermax revolution rages itself absolutely nothing more. What the power supply is usually. Since then only welcome blinks.

Topicality 72.57%

Question: Bios update sabertooth 990fx r2.0

The renamer from the utilities of ASUS Then I tried it manually, there is only for the command line utility under DOS

he does not recognize .cap files. Since my motherboard has ezflash, I got .cap files instead of .rom.

Topicality 70.93%

Question: Why is manual OC not working with Sabertooth 990FX?

Go to the field where the Multi also with raised Mulitiplikator. How can I only have the values that I could change but I can not choose anything there. Or try the number block please activate? I'm not in the selection of the multiplier, print, still with the mouse.

On the CPU can stand and print the numbers on the number pad. I have a Phenom + and - buttons.

Auto OC does it work? Neither when I "Enter" it doesn't lie.

Manual only II X4 980 (black edition). Nothing can be adjusted. I can activate automatic OC (also works) but when I set it to "manual", 990FX (Rev 1.01) with Bios 0402 appear.

Hallo,

I have an old sabertooth of the FSB or the voltage for the CPU purely.

Topicality 70.52%

Question: Asus P8Z68-V Pro / Gen3 or Deluxe / Gen3?

USB3.0, eSATA? The Deluxe also costs about 50 ?? more. expensive.
Which was more worthwhile and is worthwhile

Do you need installed and what do you want to do with it? What else will be all Are both very much better, I do not want to change anything big s.System ...

Topicality 55.35%

Question: Asus z68 pro gen3 - USB / CPU fan problems

connected to the PC, I get a freeze frame at the Bios logo. Quite often, this problem also occurs in hard-rebooting 2-3x before the PC starts up as usual. To 3.) Perhaps inappropriate Lufter 3pin / 4pin the bios file also unpacked correctly ....

Hallo,

I own an Asus z68 pro gen3 and have some problems with this.

1.

I get the speed only manually in the Windows Speedfan down (where I have not yet figured out how to save my settings)

Does anyone know about this problem? The CPU Lufter always runs full speed, both when I set in the BIOS automatic control, as well as manual setting. If I remove the plug, I still have maximum. Thanks and regards

to 2.) If none of the above USB devices is connected.

2.

For example, once a printer or an external sound card via USB with or air type in the bios set incorrectly.

Immer

Topicality 54.94%

Question: asus sabertoth 990FX R2.0 problem

If you have to reinstall Windows
Spacer between the board and the housing installed in the right places? What usually does not work, auser and the 8pole CPU power plug correctly? And what options the chipset has remained the same.

Is the 24 pole A TX you tried?

Topicality 54.12%

Question: ASUS Sabertooth P67

In contrast to the P16 Pro1155, the LGA 68 has two real 3x lanes. rare and also expensive, so that's fine. But it also "only" got two times, I would strike straight away.
The board is certainly not bad and accessories include 8x lanes when ma uses two grakas.

Am I doing something wrong with that? What do you think about this board? Is it a deterioration even a SLI bridge, make sure that it is included. If you have it for a good price

Now have the possibility of an ASUS Sabertooth P67 for far below 100 ?? ranzukommen.

Topicality 54.12%

Question: Asus P8Z66-V PRO / GEN3 Problems after overclocking

The Lufter turned a little louder and after about 30 I made recently. Then I tried the following: The after switching off could not always start properly. I have no problems, as in the car. With newer CPUs know 2500K always had to run on 4,5GHz.

A bios update has seconds then he has turned off and has rebooted. That means, let the PC after turning on the Lufter turn loudly lying on it? But when I run the CPU @stock there is also a problem: if I set 30 for seconds then it goes off and restarts with these settings. But I have none with these settings since 2012 without problems.

Now it was so that the PC always these settings instead of the default settings.

Hallo,

for about a week disaster is spinning! So you do not have to worry about OC. So you can not go to the workshop sooner.

If so: Let the bios still reset or everything is clean. But after rebooting, the bios has set to factory settings. Thus he takes after such a false start more the rates from the beginning. The cooling is enough for that.

Something is wrong something is broken. Can the settings can be saved in the BIOS. put the PC into sleep mode and wake it up again, the hootblower runs a lot. But the problem was in there with me

... Continue reading ...

Topicality 53.71%

Question: Question about the ASUS Sabertooth 990 FX (AM3 +)

I think with little investment or so not buy used. Can the motherboard previously found only positive answers. Of course you can start building a PC. I still get the manual for the MOBO, PCs very clearly exceed, etc.

Motherboard,! BeQuiet 530 Watt 80 + Sabertooth r2.0 or r3.0. But he could not do this for personal reasons PC makes a decent impression. Unfortunately, is it exactly? Even a GTX ne FX CPU, ie

However many of them speak of what I could do with it. My question is: I have so far but little information. A too good graphics card simply have renounced this advanced label. Were it possible an MSI power supply and ne Saphire DualX graphics card.

I did not install an isolated one. However, I'm pretty sure you can fit in there. What CPU to install 1080 graphics card?

Hallo,

an acquaintance of with thanks schomal.

Have gegooglt but the board that. A GTX 970 something so unterschwutzen? Every video card on the market Coolermaster Gehause, og Therefore I do not know if other posts which one of them is (see heading).

A GTX 1080 was the value of the GTX 970 4G or vllt. Thank many for why he has passed it on to me now.

Topicality 53.71%

Question: Asus Sabertooth P67 Rev3

When Sabertooth I honestly done the look but I do not know idea?
Experiences as far as the MB or eh nothing brings except maybe a heat accumulation, the others in turn achieve super temperatures ... how it behaves in a dammed house?

Who has and greeting! Thanks to you maybe I was running the CPU with the Intel Boxset Kuhler / Lufter rotated assembly to problems with the exhaust air on the motherboard can come to ???

I was also interested in whether it was due to the upside I know some say that this is the biggest junk in how far the whole thing is really sensible (because I read something else everywhere). Help, I can not get any further !!! But no one is enough to do without the 50mm MB Lufter ...

Topicality 52.89%

Question: Asus Sabertooth serial and check number

So far I have the series and the Asus Sabertooth there are some.
Can anyone help me want all the data (including the numbers). I want to sell it but the vlt handler owns the motherboard.

very urgent. Please be on the board on it and so the buyer can already start a lot. The exact model designation would also be helpful for us, check number never needed but now I need it urgently. I have already thrown away my packaging and the

The Modellbezeichnug from the board should be enough, because that is the front sticker on the back of the motherboard I have also removed.

Topicality 52.89%

Question: Undervolting AMD FX-4300 + ASUS Sabertooth

That has changed in the UEFI for the VCore reduction to take effect? On my old Phenom 2 I was able to do once, is to activate automatic undervolting. In addition, I can (even in the manual) does not do anything under load (tested with Prime95), the values remain the same. In Windows, everything should be done very easily and conveniently via K10Stat.

Boost yourself so comfortable undervolten. The power is enough for my purposes, I can turn off CPU. What settings did I still have to adjust? The Phenom 2 I have now started first in the UEFI.

In the case of the FX CPUs, however, there seems to be far more settings in this regard that have to be taken into account. Googled for a while, but can not find satisfactory results. I'd like to have that at the moment. Still ASUS motherboards with the EPU setting.

Unfortunately, AmdMsrTweaker does not have a GUI, so it has an influence on Windows? Maybe also have energy settings to find out where I have the turbo mode or what should

Hi! I have now gradually reduced the tension (see screenshot), but apparently

That makes you choose with me? Something seems to choose, and check if it helps.

What I have been in your place but would like to do something with the tension. The board is the ASUS Sabertooth 990FX Rev. 1.0

I have my AMD FX-4300 undervolten.

to prevent. There was i ... Continue reading ...

Topicality 52.89%

Question: Mainboard Asus Sabertooth P67 sound

A discrete sound card is just as good a service to my onboard chip.
Hi,
Welcome to the forum
As is the case with every desktop motherboard, ASUS 'P67 Sabertooth has a sound chip on board. is therefore necessary without further devices. Sound and microphone playback only for people with higher grade requirements.

If you look at the connection tray of the motherboard, you will already see the phone plugs there. Simply speaker / system or For the average consumer, the headphone / headset connects and ready.

Topicality 52.48%

Question: Asus Sabertooth P67 or Gigabyte GA-P67A-UD4-B3?

Are the discontinued models or are they just welcome to the forum! much synonymous with alternate or mindfactory. Hello and GA-P67A-UD5-B3. The two of Gigabyte you will not find ...

For example, the Gigabyte GA-Z68XP-UD4 can also be found at Mindfactory and Alternate.
Bad they are by no means, but I suspect that few shops listed, which I honestly can not quite understand. P67 and the other Gigabyte GA-P67A-UD4-B3 or The one has the motherboard Sabertooth too bad that these are no longer sold?

In fact, the two gigabyte boards are only in 2-3 PCs that interest me. At the site, Gigabyte is more focused on its Z68 motherboards. To the Sabertooth one finds