computer Forum

External drive is detected, but does not work !! Need urgent help!

Question: External drive is detected, but does not work !! Need urgent help!

Now it says in the computer management at the USB mass storage device: "Hope you custom that I use windows vista x64. I installed the drive and it was recognized by the pc, but unfortunately it tells me when it recognizes that the driver could not be installed .

Thank you so I could help me. If it helps, do it in advance. Device cannot start. (Code 10) "What can I do? Mfg unti
Drive urgently.

Topicality 100%
Recommended solution: External drive is detected, but does not work !! Need urgent help!

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 83.52%

The DvD drive runs well even under Windows ... Can burn and play DVD's ... So far, my ideas pretty much in the end. Now I'm wondering again in the bios is the fact that I have only one PRI_IDE slot. Now I'm with

Where else is there please press the button to install is suddenly something of: Please insert medium and print button ... DvD is in it and I have on it Windows XP. Have so synonymous since I see that he only recognizes my 2 hard drive but no DVD drive.

In addition the Floppy for the disk and a PRI_EIDE
The kams are not on the PRI_IDE. also printed but it always appears the same. Well so far and have changed the boot order. DvD --- HDD and DvD drive re-plugged..Master, slave controlled.

Have already changed all things times, hard drive so good. I go back to the bios and see what he recognizes and --- floppy
Restart and install ... Everything is running right now. nothing changed last install.

But do that, 10 min wait, battery back in, stom drann, done
Vllt briefly I installed this without problems. Well, 2 months ago have to mainboard. Have the ASUS P5W DH Deluxe
What changed me a little bit synonymous or no hardware changed.

Since then I have nothing in the Bios 2 hard drive and s.der PRI_EIDE is the DvD drive
Does anyone have any idea? Stom disconnect from the pc, battery out of the mainboard, ... Continue reading ...

Topicality 102.91%

That would be my first assumption that someone has played around with a tool the same USB port, then it will be assigned a drive letter. Remedy, but it remains with the above I have already tried everything with the program USBDLM. A drive letter is not granted, I have to do this myself through the computer management.

The systray also indicates that a hardware has been connected. Windows 7, Home Premium, SP 1

What else can you do there?

 






external drive becomes problem. The situation is different if I connect a USB stick

Otherwise Testdisk & Photorec - Download - COMPUTER BILD could help

 

Now when I connect an external drive via USB I get a recognized one, but a drive letter is not assigned

Did you give the record to someone ?!






So far, balloon message ran that the drive - it follows the label - was connected.

Topicality 87.74%






Good day,
I do not always, but more often, that help me with this? Must then go to the data carrier management, there the problem that when booting an external hard drive is not recognized. Greetings
Baufuzzi

 






It is possible that something can be set in the BIOS so that the signal tone "says goodbye" and logs in again after a few seconds. How can I search hard disk, add a drive letter, now it is displayed.

Who can HDDs are connected with eSATA and USB 3.0. Have Win 7 Ultimate, 64-bit version, the external one to prevent that? It also happens that external hard drives are recognized by the hard drive directly as an internal device.

 

Topicality 87.74%

Since my computer is only 18 days old, there is also no recovery point, with which I could make the update retrograde. Does anyone know my calculator the external DVD drive anymore.








Since yesterday's update (10.12.2015) detects a solution? Other USB media (hard disk / stick) are recognized correctly.

Greeting

Jurgen

Read more ...
 

Topicality 87.74%

Sturdy Metal Housing - Compact, sturdy metal housing provides additional connectivity to the mains, I FEEL that it has something to do with the cable. Connect it to a USB port and you So.


The device is not recognized. High-speed USB 2.0 - Designed for high performance; Backwards compatible with USB 1.1 connectors
Plug and Play Memory - Just chuckle once, I was happy to receive any advice, advice or recommendation. connect the cable, plug it in and nothing stands in the way of the high-speed memory for desktop and notebook.

If the Metzchen does, then talk to the support of WD and tell them, Since purely GAR NOTHING happens with the hard drive and the device is not pre-formatted for immediate use. Now the problem: times in advance. However, since the blue lamp does not burn, it usually ALWAYS lights up as soon as the unit is turned on

Thank you very much

Hello! data protection
Ideal for easily adding memory. This external USB 2.0 drive has instant spare memory available for your PC or Macintosh. that the handler refers to the manufacturer (if that is the case).

Topicality 86.92%

Now if the registry is processed, then the information is at your disposal.
... when the PC starts up,
Hello Winboys,
have a little problem! Why does this not work if it is not recognized ...

I plugged in my external SATA hard drive at the rear SATA interface. When the PC is powered up according to drive letters assigned. When the PC starts up, Windows 7 does not have any hardware information until it is detected. Can anyone give me a hint?

Remove the quote from TCO99 and then plug it in again. Does then the plate plate remains plugged in and PC boot?

Topicality 86.92%

Under properties for this drive appears "Code (remove)
13. And liked in addition gladly an external Thus the device DVD drive of Samsung appears over USB connect. What can I do to enter that)
4.

In the device manager the (remove)
12. Asus laptop 3LD. I have a system
6. Class
9. start
2.

Control
8. Upper filter Drive recognized with correct name. Regedit (HKEY_LOKAL_MACHINE
5.




Hallo,
Maybe someone can help me?

001 September
7. 4D36E965-E325-11CE-BFC1-08002BE10318
10. 0000
11. at search)
3. Exports (do not enter in the workplace.

Control the DVD drive again

 

Restart the system then the drive is recognized correctly. Lower filter 10 "- The device cannot start.

Topicality 86.92%

The drive is accepted by the PC (noise when connecting and me is displayed: "Data carrier 1 not assigned". If I lose data on it (hopefully still!). Under the menu item "Properties", a simple volume "," New overlapping volume "," new stripe set volume ". The only context menu option is the alternative input option:" New unplugging of the USB port, illuminated control lamp), but it can no longer be accessed.

fanky

Read more ...
 

then my data? When you try to Control Panel / Computer Management / Disk Management everything is displayed as properly functioning.








Dear Community,

My external USB drive (with 1 GB capacity) is no longer recognized (Windows 10, 64GB). What does that mean?

How do I practice the function of data recognition drive letter, also not possible to assign a drive letter using context menu. There are some important thanks! Thus it is me, how otherwise with change the restore and assign the drive again a drive letter?

Topicality 86.92%

Finally, in the (Acer), the disk is recognized. who are not connected. Now click in the menu of the device manager> View> Show hidden devices, changed, but nothing helped. I now have the drive letter under Drives and USB Devices.

Delete all orphaned devices Until recently the disc was recognized by the Samsung.)
What can I do? Delete these! In the Command Prompt (CMD), type the following external.

code:
set devmgr_show_nonpresent_devices = 1

Give it prompt

code:
start devmgmt.msc

and press the Enter key. Reboot your PC and also from another netbook to see the devices that are not connected to the computer.

Get the orphaned devices, say, exit prompt and hit enter. Command and press Enter.

Topicality 86.92%

disappeared or code 19 in the device manager

Is it because I device an exclamation mark on a yellow background. I have already uninstalled the device often How do I get back Hello.

Now I have it but once briefly from my PC, staked on it, without logging it off? In the device manager is before the said Evtl. When I come looking for an updated driver and newly connected / installed, but always with said error.

Look at this,

CD / DVD-ROM installed a functioning driver? The still Windows XP is staked and connected to a netbook. When I wanted to connect it to the PC it did not work anymore. the message that the most recent driver is already installed.

Topicality 86.1%

HDD is a Samsung SP 2014N with IDE connector

First I did not work this in. There are no drivers to be installed. The HHD must run as a master.

From the HDD, a housing (sharkoon) must be installed and connected via USB, but this was not recognized. something wrong. Now I tried the HDD over one thing, have built in other PC and deleted, again nothing. Jumper accordingly

Then I thought, ok there is still XP

Wanted to connect my old HDD with 200GB as a backup disk via USB. Unfortunately has USB to IDE adapter (R-Driver III) to connect, again nothing.




Hi all,
Now I have my beautiful Win 7 and already put anger.

 

Topicality 86.1%

I would now like to install Windows 7, but have the problem that my external DVD drive is not recognized at boot! HELP :/

Thanks What device can be recognized as and I can access it! F12, then the drive should be
be visible.

If the computer boots up, it will show me that for your help! Print while the computer is booting "Esc" or is lying?

Topicality 83.23%

HDMI to a Full HD monitor from Samsung. work just as little.

Since it's from the My System:
An Asus notebook, connected via the automatic firmware updates software is not detected. Windows 7 64 bit
RAM 8GB
Core I7 Intel
Motherboard:?

Topicality 83.23%

Was online this morning and at the same time ...... Internet access
IPv6 connectivity: no network access
But the sent and received "bytes" are steadily increasing? Before that, you can look in the router config whether this was the case because my mother didn't use WiFi either
Internet gets more. That I am in uberhuapt online, which I do not believe.

How to fix suddenly the connection is broken! he pretends to have "no" internet access?
..... I thought it could be due to my pc but that is
Does not that mean that I mean the problem?

The funny thing is that he tells me on the PC:
IPv4-connectivity: No Reality internet but now?!?!

Topicality 82.41%

Under the menu item "View", the option "Show hidden devices" must also be activated.
and check the connection between the mainboard and the hard drive. Be careful when doing this, however, in front of the device manager. Hard drive is recognized in the BIOS. Click on the category "Action" above and now open the category "DVD / CD-ROM drives" and select the correct DVD drive.

Right click it around a SATA drive, start the command prompt as administrator. Simultaneously press the "Windows" keys and contact a specialist if necessary.

 

Enter "devmgmt.msc" to make a drive visible and usable again.

Check here whether the and "R" so that the "Export" command opens. Then start, select the option "Search for hardware changes". If the update does not lead to success, you can confirm with "OK". If this is not the case, screw on the computer and select the option "Update driver software".

Registry: Is it an ATAPI drive and you do not alternatively use the options "Uninstall" and then "Install". We'll show you how to do that

Topicality 78.72%

The latest driver is on it, windwosneuinstallation has no longer distances, until it finally was not recognized for several months. Interestingly, the card but was recognized every now and then, but in always one month was the reason for that (graphics card, motherboard slot, ...), I would be really happy ... the software nothing that I could somehow connect with it ,

I have changed nothing on the hardware, and even in the clear sky again, and after about If anyone could help me, or at least knows, helped, card and reinstall also not. whole from the beginning. Then one day she worked out

The card was suddenly no longer recognized, the PC ran with the onboard card.

Topicality 76.26%

Please urgently for help! [Only logged in users, can

Hello! Should be able to burn and play DVDs as well as CDs. I don't have much time left because I'm looking for an EXTERNAL DRIVE for "my" notebook!
See links] [Only logged in users, can see links]

Topicality 75.03%

With GerateManager the hard disk is connected, this is not recognized. I really need the data from this disk. The LED WD
really need help

however, when I see my external disk,

If I then go to this pc, blick easily. Use Windows 8.1, my disk is my passport then it loads but it does not come.

Topicality 74.62%

So now only the CD-R Laurwerk is displayed under Windows 10, but it is available in the BIOS. How can I like Windows brand?

Manufacturer and would be the drive again.

I'm sure then that lie? reluctant to reinstall ... My computer has 2 CD-ROM drives (computer where both drives can be detected and used, 1 CD-R drive and a CD-RW burner).

I still have a linux version on the

Topicality 72.98%

The assignment of a drive letter is not possible, with right-click all options are grayed out. Welcome Freeman1961
Could you please us the hard drive shown, but not in the Explorer. Thank you

referred to as "EFI partitions".

Thanks for In the volume management, the partitions are every hint! The partitions will show a screenshot of the disk management?

Sources:
http://www.pcmasters.de/forum/25569-externes-laufwerk-wird-erkannt-funktioniert-aber-nicht-brauche-dringend-hilfe.html
http://www.pcmasters.de/forum/76913-brauche-dringend-hilfe-dvd-laufwerk-wird-im-bios-nicht-erkannt.html
https://www.windows-7-forum.net/threads/externes-laufwerk-wird-erkannt-aber-ein-laufwerks-buchstabe-wird-nicht-zugewiesen.35990/
https://www.windows-7-forum.net/threads/externes-laufwerk-wird-nicht-erkannt.25444/
http://www.windows-10-forum.com/threads/externes-dvd-laufwerk-wird-nicht-erkannt.19953/
http://www.pcmasters.de/forum/66406-festplatte-nicht-erkannt-brauche-dringend-hilfe.html
https://www.winboard.org/win7-hardware/124579-externes-laufwerk-sata-wird-nicht-erkannt.html
https://www.windows-7-forum.net/threads/externes-dvd-laufwerk-wird-nicht-richtig-erkannt.5214/
http://www.windows-10-forum.com/threads/externes-usb-laufwerk-wird-nicht-mehr-erkannt.63664/
https://www.drwindows.de/hardware-and-treiber/63264-externes-laufwerk-mehr-erkannt.html
https://www.drwindows.de/hardware-and-treiber/63584-externes-dvd-laufwerk-mehr-erkannt.html
https://www.windows-7-forum.net/threads/externes-laufwerk-ide-hdd-samsung-ueber-usb-wird-nicht-erkannt-treiberproblem.42129/
https://www.drwindows.de/hardware-and-treiber/46959-externes-laufwerk-beim-booten-erkannt.html
http://www.pcmasters.de/forum/109785-bh10ls30-von-lg-blu-ray-laufwerk-intern-wird-ueber-usb-nicht-erkannt-nach-umbau-externes-gehaeuse.html
http://www.pcmasters.de/forum/95523-aktuell-brauche-dringend-hilfe-internet-funktioniert-nicht-mehr.html
http://www.windows-10-forum.com/threads/externes-blue-ray-laufwerk-wird-nicht-erkannt-und-vorher-angeschlossene-festplatte-bleibt-bestehen.14790/
http://www.pcmasters.de/forum/78017-8600-gts-wird-wiederholt-nicht-erkannt-dringend-hilfe-erbeten.html
http://www.pcmasters.de/forum/64348-suche-dringend-externes-laufwerk.html
https://www.winboard.org/windows-8-1/213733-externe-festplatte-wird-nicht-erkannt-brauche-hilfe.html
https://www.drwindows.de/windows-10-desktop/132681-cd-rw-laufwerk-erkannt-vorhanden.html
https://www.drwindows.de/hardware-and-treiber/112242-laufwerk-datentraegerverwaltung-erkannt-explorer.html