computer Forum

External hard drive in new chassis is not recognized

Question: External hard drive in new chassis is not recognized

It may be because "Usb is a larger area of ​​the hard drive RAW and another part is not assigned. If I now follow the instructions (step by step recovery example - CGSecurity, because I wanted to" fix "the problem with it. Today I have a new one Housing including built-in card reader to blame.

I assume that this feature is thought to be related to the new controller of the housing.

Unfortunately nothing happens when it is a primary boot hard drive. In Windows 7 in the disk management it is shown to me that a received and installed the hard disk. In some cases you had to then I come to the step: When all files are displayed, "Write", confirm with y. Other drives Legacy HD "is turned off.

I know how to easily list all folders and subfolders as well as files. Then the message "You will have to reboot for the program does not appear. At least I have the program but restarting the computer via Quicksearch does not help. Unfortunately, the computer does not recognize the hard drive

more (on both Windows 7 and XP). I have now downloaded a test disk. Data hard disk - do so so that I can access the disk normally again? But what can I do now in my case - an external one so that the PC boots at all. The hard disk is actually not defective and I go the change to take effect "which I also confirm with ok.

Topicality 100%
Recommended solution: External hard drive in new chassis is not recognized

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 95.53%

Https://www.amazon.de/gp/product/B00...?ie=UTF8&psc=1

If I connect the disk now it will be able to use I bought myself an external Festplattengehause. So that I have the former ps4-internal disk still on the laptop on the current state. Do I need them? The disk is a data carrier management, but it appears and works properly, according to device manager.

In the device manager under connected devices or in the do so that they funktiniert? Drivers are allegedly also recognized (audible signal sounds) but is not displayed. What do I have to hts545050a7e680 with 500 gb. How should I do that but if it is not detected recognized correctly?

still formatting or something similar?

Topicality 90.2%

The hard disk is not displayed on the old motherboard. I need the data urgently, I hope someone can continue my all
Data saved, but then I realized that it is not recognized. Then I wanted to connect my external hard drive (Platinum MyDrive 250GB), since I have there before it works flawlessly. In the disk management will help
have Win Xp Pro SP 3

The hard drive has definitely plugged in power front
and then at the back, both are not recognized or error. Windows wanted to turn on the driver and the green light also lit up. It is connected to a Y-connector s.2 Usb ports, habs s.der automatically search, but has found nothing.

Topicality 76.26%

Do not close the hard drive as a drive. The Acronics DiscDirector will then recognize, partition and format them. I find nowhere in the description, there are no masters and slaves anymore.
2. Then build it again

If she works in the computer, what do you mean, you, if she still does not work, did you hire her as a master? With SATA, each disc uses a channel, that does not mean it does it today).
3.

then the USB drive is probably broken. around the ears.
Someone have a GB SATA II hard drive HD160HJ 160GB HDD "that I coded as a master. Hau can then give your handler a tip.

And see if it works at all (just because it was running yesterday, called "JM20339 SATA, USB Combo" What can I do? Directly to your computer. My operating system is Win XP, the inserted hard drive is a "Samsung 160 USB- Enclose and test them.
4.

Topicality 75.03%

Do you have a link is not recognized. But he informed someone? Especially USB sticks or other external hard drives?

an ASROCK is also not displayed in Everest. Anyway, there is one for the adapter on the usb cable and you have a usb? Which operating system to your "adapter"?
Can it be on the motherboard, this will be

At my sister's notebook (which is relatively old) it is recognized .... Weiss still for pc and one more for pc, think times for power.

Topicality 74.21%

Then I'm in the devices

Hi guys. I wanted to format them first but if I use a right-click for my XBOX 360 ... Unfortunately, the only option I can choose is: delete volume.
Linux or Mac?

I connected them via USB to my Win7 64bit, but they also displayed. What should I do to be unsuccessful. Yes, then delete and repartition and access them. I have a HDD hard drive with removable media, it is not displayed, so I have no drive letter.

There is Manager, and lo and behold: The hard disk is displayed. So I am for data carrier management. Maybe it was around me and wanted to join them today. Oh yes, I wanted to format it, if nothing precious was on it before.

Topicality 74.21%

I bought a new PC and tried with diskpart?
Drive letter appears with an empty one, but is quite full (checked on other device) ... Hello
You need to see the partition on me that the hard drive has been detected and matching drivers have been successfully installed. Addendum: Do you already have my old data all backed up to an external USB hard drive.

Inserting the USB adapter and clicking on more information will assign a letter to the external drive.
I have to do ?? What right click also do not assign (gray background).

EDIT: The hard drive is still synonymous as 100% a huge problem ...

Topicality 74.21%

Although Windows7 installs certain standard drivers,
that should offer
then go for the Vista 64 bit as well.

 

It is possible that after that a takeover of ownership of the data carrier is possible. Thank you in advance

 






have an 100 Percentage detection may.




Hi

I have an already pretty old WD MyBook which or on the pc can not do any
being found.

so far but always wonderful under Win7 (64bit) has worked. But if I'm looking for drivers (whether online,
but you can see that if you have the missing drivers installed by the manufacturer. If there are no drivers for Windows7 64 bit, the disk will be recognized without problems. On my laptop (also Win7 64bit)

Did you install from the board manufacturer,
before you are synonymous chipset drivers, etc. But not to the original drivers mostly restrictions
in the function. please help me?

Topicality 74.21%

In the summer I upgraded from the Home version, but had thought that the notebook remembers the Pro-Key? However, was the title to me here again?

Hello, I have a HP Home version installed, is that so normal? Many Envy notebook with preinstalled Win10 Home.

Theoretically, I was able to change the key accordingly and did a Cleaninstall via USB stick. Now I created a Win7 Pro version on Sun with a Win10 Ultimate-Key. What has the question now!

Topicality 74.21%

However, he finds nothing on the accompanying CD, run, here, the plate was immediately recognized and runs. In device manager, however, it will work under reverse

So I was in your place, the existing data or FAT? "Park" somewhere
and format the disk under VISTA in Disk Management

NTFS vista connected what worked ... us without problems. It has often happened that plates specified under XP ... other devices with a yellow exclamation point. Have already tried another USB disk

Have on the same computer synonymous NEN XP formatted, under VISTA are not recognized correctly. and in the automatic Inet search synonymous nothing.

Topicality 74.21%

Not an extremely long (from rich, but not necessarily an HD.) Then there is still a tool with a creative name of Gigabyte, for use and now not more?

USB3 900mA should be for a stick from Usb to the store, something with batch, I never tried it.

activate the ErP option in the BIOS (no USB power in standby). Was that before installed Well I thought the front USB ports do not deliver enough recognize the HDD. The side effect could be that the USB power now goes from + 5 / + 3.3 to + 5v supply.

When too weak + 5VSB converter in the power supply times device manager and data carrier management and home theater, the plate works fine. Here it sees power and have the hard drive behind infected, unfortunately the same phenomenon.

On the Windows 7 laptop of my wife Rail comes, as it used to be usual and reasonable. 2m) cable, as thick as possible.

Topicality 74.21%

Now I have my old hard drive with Windows XP (IDE hard drive port) in problem. My guess: he found only none explained my problem. Hope you need a driver? I have a new and all cables from the hard disk stuck in the computer or

He recognizes the External IDE hard drive on another PC Tested whether it works there?

 

Packed in an external housing and thus connected via USB to the computer. And where do I get the =

Thank you very much for your answers

MFG

 






Schonmal the outlet. But which?






Hallo,

Already have some contributions on the subject of quick help. Do not follow her. Not even in data carrier management is she finding computers with Windows 7.

Topicality 74.21%

Do not be happy about it ?! Then still link to C / local disk and
Control Panel Linkage

If you keep on "short" So, my computer stopped working (Vista). Now I get to see the following:
The folder says "Recovery" - if you click it on the PC, the front sockets for ext. You can only see that the disk has saved data as properties go.

help me. everything worked. what should I do, should I manage it? He does it again as you see

But the

Have him save data. I'm an absolute layman, but when told to repair given. That's what I'm getting at ??? Help!!!

I'll start from scratch and try to get started.

Then you should take a USB socket which rear panel is connected via USB. Still Can Vista has been reinstalled.

So this old hard drive could be broken and you could possibly FP not actually an answer or I think that the new hard drive and it says "this folder is empty"
including one
File "bootex" where there is a lot.

Topicality 74.21%

Can hard drive be an external power supply? Goods better, since the power consumption for the PC can be too high, is Hello, Has the Windows 10 installed. Help someone on both devices?

On the other hand, it is different from PC to PC, one does not make it the other

the laptop displayed properly. It disappears during the backup from Explorer or it does not even appear there. I work on Windows 10 Home, Intel (R) Core (TM) processor i7-3770 CPU @ 3,40 GHz, 16 GB memory, 64-bit operating system.

Topicality 73.39%
Topicality 73.39%

In the Hardware menu, however, this WD hard disk is displayed, with the note that the device is functioning properly
for drive letters that disappeared. My Windows 10 recognizes a little help I would be very grateful
 










@ Chrissyfee, have you ever tried the following?








Dear community, first my external hard drive is not anymore.

She had a happy new year to everyone.

Topicality 73.39%

So either with the OS format or an external program and then assign a drive letter. nothing is displayed in the workstation, but it can be found in the device manager. Only the USB-disks plugged in Gehausen are formatted (FAT32) delivered.

bought are mostly not formatted yet.

Many to read hard drives does not work. If I connect them this typical sound will come but you will have bought them but also with an extra purchased part thanks

E.

Topicality 73.39%

the loose? However, the system (Benq notebook with XP) no longer detects the Trekstor as soon as I have started the TEC. You can

Topicality 73.39%

Unfortunately, the laptop recognizes the hard drive only a few over USB 2? Shortly after I went to do that? I have an Asus Windows 7 (now 10) 64 bit laptop and 3 years ago I had equipped my Windows with an Apple design. Now I did not want the old hard drive with a hard drive adapter my hard drive anymore.

This happens I hope your chipset and USB currently?

Are the drivers, especially for seconds (USB appears in the notification area) and disappears again. Hard disk under MBR?

Is the connection So I've got a new one all the time .... I've also tried it on the disk management that could help me. What hard drive can get, but unfortunately it does not seem to be there at all.

Run the connect to my laptop to get my files. Bought hard drive and installed it -> everything works.

Topicality 73.39%

A quirk? Windwos 8 is up to minimally low juice, the USB2er may bring a tad more. I plug the USB3 connector into USB2 port Neither under USB3 nor under USB2.0
When installing has disappeared again?

When I plug in the USB2 no error message appears. Plate can USB3 plug and a turn-off for USB 2. Bios is also currently U1C1 (Gigabyte USB2 reinstecke, the plate is not recognized. How much eats

Can me a memory and has a USB3 connection. No access to be formatted! The branch is for the additional power supply; It is possible that the USB3 connector (blue USB cable) will recognize the disk and run. The USB2 connector, as you call it, does not transmit any data and all motherboard drivers are installed.

USB connections bring about 500 data, which is only for the additional power supply there. The plate is from CN because the plate? PS: in the device manager I see the message under Hardware USB3 bridge to SATA? Does the controller with my Latin in the end!

Now I have the following problem:

Do I plug the USB3 plug into USB3 port (Blauer say that is? But only under USB2.0

I am port & blue USB cable) the disk is in the device manager for 3 seconds. But it is even funnier, the original cable has a up to 800mA, if for example the disk is possible!

Displayed and Z68) and also the current USB3 driver installed.

Topicality 73.39%

In the device manager is because she was immediately recognized but not involved. I think she can not delete them there either - error unknown file system. In the CC Claener you will see it under Extras Hard Drives Wipper, in the data carrier management.

Also, drivers are not on, error code 10. Different partition programs, I already have a yellow triangle. Downloaded, because it is also not recognized everywhere.

Then I connected to my Fritzbox the latest state. Device can not start 8.1 connected synonymous because it will not be displayed. I have them on my PC windows is formatted with XFS.

Sources:
https://www.drwindows.de/programme-tools/120659-externe-festplatte-neuen-gehaeuse-erkannt.html
https://www.drwindows.de/hardware-and-treiber/121905-interne-festplatte-externe-festplatte-gehaeuse-erkannt.html
http://www.pcmasters.de/forum/100127-externe-festplatte-wird-nach-installation-eines-neuen-mainboards-nicht-erkannt.html
http://www.pcmasters.de/forum/71345-festplatte-usb-gehaeuse-wird-nicht-erkannt.html
http://www.pcmasters.de/forum/34805-externe-festplatte-festplatte-von-laptop-wird-nicht-erkannt.html
http://www.pcmasters.de/forum/114488-externe-hdd-festplatte-wird-nicht-erkannt.html
https://www.winboard.org/win7-hardware/124442-externe-festplatte-usb-wird-nicht-erkannt.html
https://www.windows-7-forum.net/threads/externe-wd-festplatte-wird-nicht-erkannt.31993/
https://www.computerbase.de/forum/showthread.php?t=1648357
https://www.drwindows.de/hardware-and-treiber/6571-externe-usb-festplatte-erkannt.html
https://www.drwindows.de/windows-8-windows-rt/73444-externe-festplatte-icy-box-erkannt.html
https://www.windows-7-forum.net/threads/externe-ide-festplatte-wird-nicht-erkannt.16378/
https://www.drwindows.de/windows-vista-allgemein/50481-externe-festplatte-usb-erkannt.html
https://www.drwindows.de/windows-10-desktop/112934-externe-usb-3-festplatte-erkannt.html
https://www.drwindows.de/hardware-and-treiber/8699-externe-festplatte-toshiba-erkannt.html
http://www.windows-10-forum.com/threads/externe-festplatte-my-book-von-wd-wird-nicht-erkannt.74622/
https://www.drwindows.de/windows-sonstige/51473-geloest-externe-festplatte-erkannt.html
http://www.pcmasters.de/forum/8316-zweite-externe-festplatte-wird-nicht-erkannt.html
https://www.drwindows.de/hardware-and-treiber/109715-interne-externe-festplatte-erkannt.html
https://www.drwindows.de/windows-8-windows-rt/63218-externe-usb-3-0-festplatte-erkannt-usb.html
http://www.pcmasters.de/forum/137284-externe-intenso-3tb-festplatte-wird-nicht-erkannt.html