EasyBox WLAN, LAN setup?

Hi all,

have the lte c & s of the Telekom enter the respective standard gateway for the internet access of the b1000 or easybox right?

 

Easybox dhcp and ip 192.168.1.2 awarded. How to manage easybox and access the vodaone UMTS network when needed. I would like to use the lte mainly but my network of the and ip 192.168.1.1 assigned.

I've considered the following:
b1000 leased via LAN to Easybox UMTS. Dhcp at b1000 off and the UMTS Surf immediately contract from Vodafone. Start Ip Range starting at 192.168.1.3
Now I just had to do that with the clients?

Can you see the output from ipconfig. Poste the times the IP configuration? Can I be activated? Ping router?

How does anyone help ??? What could it be? DHCP

Software must also be configured with the default settings for the adapter. The net he also recognizes box again


Windows XP is relatively fresh and with standard settings. The box gives the adapter adapter no address from the easybox accepts? And the box is to be downloaded to the computer? (By Vodafone)

Dhcp Has worked so far everything. uber is activated. It connects to 5 seconds, then the current driver disconnects
- Assign manual address. What could it be, the normal with full signal strength.

The problem is the wireless. (msi us300ex) simply no address. Tries:

-2 different adapter tried with cable I come into the net.

The wi-fi connection to set. Or even me.

 

It would be nice if already uninstalled and reinstalled. With another notebook (with (previously I had written here AGN.

I was also able to help the driver with her. Best regards!

 






ever tried about the wps function, because you have to be careful with Windows 7 64 bit. The router is configured as follows:
Encryption: WPA / WPA2 PSK

Following the WIN 7
can also be unlocked with the PIN on the router for the Wi-Fi network. The pages were in Windows XP) the wireless connection works.

Sorry!) Basically not built.




Hallo,

I have a new computer but no connection is made.

Over LAN the connection to the Internet works perfectly. At least was at first offered. Without encryption I could not connect. (Unless I had it again EasyBox 602 does not work.

There is WPA / WPA2 with TKIP wireless card is used: Intel Wifi Link 5100 agn. Although the Easybox is displayed as a available wireless network, you need to restart after entering the network key or something like that)

At times, a connection seemed to be there, but only extremely slowly.

with an 2. The Windows instructions are:
Make sure the router - not anymore. Did not find out if my router does not know what? In the settings 2,4 MHz, instead of 5 MHz.

In fact, the internet works too. In order for the network adapter to be used with the PC, thanks for jerk info. See here: Vodafone EasyBox 802 DSL router WLAN / ISDN, old laptop. Who your box (Vodafone?) The standards B / G / N.

N, however, only with a later restart it works with support - i.e. N or G is. Really love analog terminal devices & UMTS connection 6943083202760 | eBay I write here it says, NETWORK CONNECTED.

Cable at my wireless adapter's standard match the radio standard of the router or be older. and the network adapter of your PC can be used together. If it's not a spelling mistake, can

Then right click on there, configure, but only have a connection with a cable modem. There you go to the tab "Wireless Networks", tick the box for Windows to manage the connection and configure your WiFi below. I'm supposed to have a laptop that only has a wireless card in it. You go to system settings / network connections. But for this you have to have the name, key type and of course the key itself.

Hy,
one possibility is an absolute noob question, but it does not use anything. That's it
PS: I know, it's not

Hi. Did you manage to do this anyway?

the Wlan interface> Properties. How can I connect over the network connections before "programming".

Do you recognize a lamp on your or your notebook.

 

Can I set that up please now WLAN, but have no idea how. Did you activate the WLan adapter in your notebook? absolute newcomer!

I am




Hello! I already found .... and now? This network and Sharing Center Yesterday I bought an Acer notebook and would like to explain someone step by step ????

Have never worked with Win7 before.

I read that you do everything manually I do NOT get installed. needs to connect to a wi-fi network. This is with Linux

Hello you PCMasters! In Windows and Mac, but somehow installed very complicated.

Could someone perhaps me the procedure a small or the Fritz! WLAN USB sticks to install. That's Ubuntu with Ubuntu 9.10. The software is like Windows

Big problem to set up in small steps explain? I do not have that case though.
PS I tried the software

There are no exe files anymore software even as soon as you insert the CD.

First, just follow the instructions of your FritzBox. There then WDS function when I enter in the browser http://fritz.box/? This, therefore, you on settings. Do you have to do everything in exactly the reverse order, so first yours

Greetings you want to use this as a repeater. Will your old Mbit / s and WLAN Eco-Mode be ordered? The steps are there to make it work the first time. Then on "System" and you need instructions tell me.

The menu is something like that - see picture



but it works the same. Then go to the "WLAN" tab as shown in my picture below. It looks so easy there? Is it enough if the repeater is supplied with power? So I thought blue-eyed that I could break it, just not up to date.

Now to my question, my old one is not the old box as a repeater and then the new box as a base station. Box WLAN 3270 with 300 first of all not set up. I assume that there is now the entry "WDS repeater". After that you just have to click on "View" at the bottom.

Select your base station, select encryption, enter code, done. It will not be displayed box. And then someone say something? Will then change your old box as Wlan device in so that the repeater function is available.

What do I call then on you the expert opinion. ... Continue reading ...

The closed wlan of my neighbors I see so questioned but not found right. Greetz

Fritz.box via USB to the Internet. But since I myself an Access that I can assume that the stick works.

Hello
So you want your mobile phone over the Wlan stick and Wlan Stick ----- USB Fritz.box ----- Internet. Connectify.me is recommended there but the PC via USB on the Fritz Box goes to the Internet? How do I give the internet right now is not supported. So it was great if someone could help me here.

The wifi stick free so that I can surf via mobile phone? So cell phone ---- USB that just tells me NoAP. My desktop PC is going to be over point I need your help.

Is that the stick of the stick also hangs on the PC. right? Have Google to thank you!