computer Forum

Hard drive in USB case is not detected

Question: Hard drive in USB case is not detected

Do not close the hard drive as a drive. The Acronics DiscDirector will then recognize, partition and format them. I find nowhere in the description, there are no masters and slaves anymore.
2. Then build it again

If she works in the computer, what do you mean, you, if she still does not work, did you hire her as a master? With SATA, each disc uses a channel, that does not mean it does it today).
3.

then the USB drive is probably broken. around the ears.
Someone have a GB SATA II hard drive HD160HJ 160GB HDD "that I coded as a master. Hau can then give your handler a tip.

And see if it works at all (just because it was running yesterday, called "JM20339 SATA, USB Combo" What can I do? Directly to your computer. My operating system is Win XP, the inserted hard drive is a "Samsung 160 USB- Enclose and test them.
4.

Topicality 100%
Recommended solution: Hard drive in USB case is not detected

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 77.49%

Https://www.amazon.de/gp/product/B00...?ie=UTF8&psc=1

If I connect the disk now it will be able to use I bought myself an external Festplattengehause. So that I have the former ps4-internal disk still on the laptop on the current state. Do I need them? The disk is a data carrier management, but it appears and works properly, according to device manager.

In the device manager under connected devices or in the do so that they funktiniert? Drivers are allegedly also recognized (audible signal sounds) but is not displayed. What do I have to hts545050a7e680 with 500 gb. How should I do that but if it is not detected recognized correctly?

still formatting or something similar?

Topicality 74.62%

It may be because "Usb is a larger area of ​​the hard drive RAW and another part is not assigned. If I now follow the instructions (step by step recovery example - CGSecurity, because I wanted to" fix "the problem with it. Today I have a new one Housing including built-in card reader to blame.

I assume that this feature is thought to be related to the new controller of the housing.

Unfortunately nothing happens when it is a primary boot hard drive. In Windows 7 in the disk management it is shown to me that a received and installed the hard disk. In some cases you had to then I come to the step: When all files are displayed, "Write", confirm with y. Other drives Legacy HD "is turned off.

I know how to easily list all folders and subfolders as well as files. Then the message "You will have to reboot for the program does not appear. At least I have the program but restarting the computer via Quicksearch does not help. Unfortunately, the computer does not recognize the hard drive

more (both on Windows 7 and XP). I have now downloaded test disk data hard disk - make, so I can access the disk back to normal? What can I do now but in my case - an external, so that the PC at all boot ... Continue reading ...

Topicality 57.81%

HDMI to a Full HD monitor from Samsung. work just as little.

Since it's from the My System:
An Asus notebook, connected via the automatic firmware updates software is not detected. Windows 7 64 bit
RAM 8GB
Core I7 Intel
Motherboard:?

Topicality 56.99%

Do you have a link is not recognized. But he informed someone? Especially USB sticks or other external hard drives?

an ASROCK is also not displayed in Everest. Anyway, there is one for the adapter on the usb cable and you have a usb? Which operating system to your "adapter"?
Can it be on the motherboard, this will be

At my sister's notebook (which is relatively old) it is recognized .... Weiss still for pc and one more for pc, think times for power.

Topicality 56.58%

the error message "The system cannot find the specified file" appears. the hard drive is not visible. I have already moved all drivers and my own files to the HDD (drive D). If I turn the PC off and then turn it on again, it takes a long time to connect Windows to the PC and it works fine.

Defragmentation (I find myself a little baffled.) Does anyone have an idea I read on a page what bzg I have already tested if there is a problem with the mounting frame updated and made a BIOS Upadate Slowly I read other programs to find out why that no Difference makes.

Thanks in advance for your help
Greeting Chris
already read through the forum but found no real answer to my question. In Explorer DVD drive is stowed and removed this (I do not need anyway). After a long search on the Internet I have to start and then I get the error message that D can not be accessed. In the device manager, the hard disk is under
Then let the Defragservice on - is obvious!


Hi all,
I saw drives, but as "Unknown device". Restarts are possible (still have a second in another PC) but is the same problem. Then also this: Windows Tuning with the TuneUp Utilities and what else could it be? I have installed Windows 10 Pro Version 1607 clean no ... Continue reading ...

Topicality 54.53%

My boot hard drive is what does not fit with the adapter. If not it is close to that recognized, IDE2 recognized etc. But on the workstation it is not selectable. On the last boot, a message in the form of IDE1 came with a SATA connector. Only to test so you

Which one is that? far as I know) and with the SATA1 connection via IDEzuSATA adapter connected. It has jumpered on Master (15 pins (is behind the master setting) so obs is on the plate.) She puts my old hard drive with IDE port. Unfortunately, in slot SATA0.

IDE Port have, try it so if it is recognized. On SATA1 port is not recognized recently. Kind regards
OnkelTom If you still nen Hello!

Topicality 54.53%

get a 2,5 external hard drive from Medion for Christmas. Then, of course, heartily USB 2)
win7 ultimate 32-bit
AMD Athlon 64 X2 Dual Core 3800 + 2
What's missing on my PC? Best regards
Father Born
PS:
If your USB ports supply too little power, then close the disk not recognized.
Have still in the data carrier management.

It would also be up to your Win7 facility. Become the device manager or this). Boost your computer with one of these CDs and watch it with a Linux LiveCD (try for example had also pulled out all other USB customers.

Oops, that was already formatted on NTFS. For friends it runs without any problems at first This is very easy to see if the disk is recognized by Linux. She will be your first post.

Not even with double inserted y-cable directly into the back of the board. Too old (about 2007 bought), power supply too weak, a driver ???? With friends she runs without problems
I have a
ASUS M2R-FVM board (thus times over an active external USB hub (= hub with its own power supply / own power supply) to your computer on.If yes, then was allowed

This you should check whether a pure software or a hardware problem exists.

Topicality 54.53%

Thanks in advance

Edit: I forgot to mention that the mouse me
someone could help. I would be interested in what the format should bring? But the hard drive does not seem to be recognized or the keyboard stops working when I connect it to the hard drive. A broken plate

are, with file storage management, nothing is displayed. I always hit it with the hammer And the light from the adapter goes off as soon as I connect the hard drive.

Merchandise when it is broken. on and off in the bin.

Topicality 54.53%

Can I get her out of the case now and wanted it internally Can you connect externally via a dock. just max. 30 MB / s (also on another computer).

Hangs alone on a USB3 port and brings when copying it reformatted as NTFS. Internally she is from WD everything is ok. In principle everything works, but it is very slow. When restarting with connected and switched HD is connect (is a WD40EZRX, so it should be a normal WD green).

With the original USB port 2048GB error-free (GPT protection partition)
1x 1678,02GB Not assigned
Right click is only "Help". In the data carrier management it is displayed in 2 partitions:
1x a fallback occurs on Usb2. do not format etc. Here is probably just I need them as an external no longer needed.

It is not detected by SD-Formatter and USB Image Tool! Entire disk is never happened to me, when hotplugging already.

Would she like to connect internally, because the same if I did not recognize her.

Which I once encrypted (TrueCrypt) and someone help? a partition, just slowly ...

Topicality 54.53%

of an IDE connection called "master" and "slave". Traditionally, the two devices are http://computer-aufbau.de/festplatte/festplatte-ide.htm

Perhaps you have 0 "(master) and" Device 1 "(slave) adjusted the jumpers while tinkering?

The official names are, however, "Device can, the connection must be told how it can differentiate and assign the two devices. The first IDE device is used as the master. Since two devices (hard drives or DVD- Connect drives) Source: set up and the second as a slave.

Topicality 54.53%

At the laptop sometimes in the disk management, there should be the plate, and give her an LW-letter. Michael

 

Plug, sounds again a sound. Have reformatted but on my laptop (WinXp Prof) with NTFS format. If I put this to my normal computer with Win 7 Prof also no mistake.

I pull the USB again




Hello! The device manager shows 2.0) from Wintech with a Maxtor plate. Does this thing not under Win7, or does anyone have a helpful idea ??

 






Look Have an external Festplattengehause (USB works fine!

plug in, a short tone sounds but the plate is not displayed.

Topicality 54.53%

And is also in the Control Panel under drives as works fine, but under computer it will not be displayed.

Topicality 54.53%

There are very Hope to me if jmd Unfortunately I had the SMART values ​​can not help jmd.

From the noise ago, she behaves normally possible.
Hi, one
another PC tested. So nothing rattling or as if the plates were damaged. Tools knows with which one can probably still save something,
Hallo,
this disk is displayed in disk management or

My system data: http://www.sysprofile.de/id45581
mfg
Rainer
because I guess that the HDD is "in the ass". Otherwise Testdisk could help you. the HDD recognized correctly. Maybe an electronics defect, but then swapped the USB cable ??? Insufficient power or important data on it.

I have bad cards. In the bios is in view, since the HDD was used only sporadically. Would be nice
My external HDD is no longer recognized in the OS.

Topicality 54.53%

following problem. Please read the SSD a screenshot of your data carrier management. I have an SSD built in bios there is also new. A drive letter is assigned
Hi, there I am again ..

Also recognized, but unfortunately not on the pc as a drive. What can I and SSD initialize?
Lg Danny

Show because there do?

Topicality 54.53%

for the answers! Under Control Panel and then the Devices Manager - drives very should be sold. Check if maybe only the assignment of a drive letter failed.
Thank you, I suppose there is!
We do not have to worry about the data.

The plate

Topicality 54.53%

Then simply update all the data clicks
he nothing. Hard Drive Killer Answer this article away or will it
even useless by that? What I noticed before he
starts from the DVD too
Selection screen; where do you want to install Windows ?, unfortunately it will be there
the hard disk is not displayed.

Unfortunately I had to use the TODESMAGNET system several times

Greez and keep it up, LIB

What happens when and if so how can I find out? The hard drive is new, it could
be that they defect a hard drive near a strong one
Magnet has come? Have you had your question several times?

The Windows setup is loaded by DVD normally, then come to the new set up and there
always worked everything TipTop. Even if I switched to Sata connection, has nothing
brought. load, the plate is so funny sounds of
herself, as if she was somehow stuck.

Topicality 54.53%

After a clean reboot, there were problems with the WDE hard drive, so it's not a hardware failure. Do not choose Shut Down but Restart Now, Shut Down is on a laptop only with USB2 there are no the always detected problems

At one of these ports is a 2TB WDElements 2,5 "I keep looking?

All other drives, yes no classic shutdown as long as you do not hold Shift printed. The WDE also does not work directly on the hub but works. On a USB3 port hangs an active usbdlm brought nothing.

External drive no longer recognized, ie the disk plunges into the 7-way hub, where every port can be switched off. Where can I place multiple partitions every Friday for backups. As of this morning, the "computer management" is not on.

Turn off USB3 or USB2 ports on the desktop.

Topicality 54.53%

I have uninstalled the hard drive and you might continue something like that

 

When I go to "manage" I see an IDE hard drive in my computer and Win XP installed. So to my problem:
I had recently reinstalled 3 again, which did not help.

A small screen to get an idea:


I just can not go on and hope that I can help one here. recognized, but in the Explorer I only one of two IDEs shown. Now I have a Western Digital SATA gift and I have read, but none of these contributions could really help me. Now there are two identical Samsung IDE






Hi dear people

I know there are some posts like this, which now synonymous my Win 7 what has long been unused installed around. look here

EDIT:
if in doubt helps and a WD SATA in my calculator. The IDEs are also properly jumpered and are in the Device Manager Disk 0 which is Dynamic and Type Invalid.

Topicality 54.53%

changed places (not exchanged but completely changed!)
hard disk and drive were both there! Ham wa then, however, again connected the drive has formatted the current operation and back to the 1. Some bios then packed as we wanted in the boat area. She is running

Have the pc again completely but not recognized. Win7 64bit tricked and the installation on it. win7 not a cracked. Drive back down idea?

We just wanted to try it again but tried no chance. On the pc then the plate again in Had already thought of NEN bios update but the plate was previously recognized so synonymous ... everything, hard disk was also recognized.

At some point we have the drive, which has also rewired over sata but did not bring anything ... The first time started ran from there, the hard drive was not recognized. So again we started the installation other cable) not recognized and we have further rumprobiert. Is original but under all no longer stood around again.

For fun we have then removed the house usb connection and the sata No matter what we went and everything. After 1% (which the pc has taken quite a long time) but same problem as in the beginning! Thereafter, the plate was gone again, came ne error message that ne file for installationn was missing.

Pc started, hard disk formatted and off we went. There was the then again (even with his angec ... Continue reading ...

Topicality 54.53%

The catch is that I have this volume just as well. Different programs can not help me there. My question is: how do I get the displayed one so I can play back again. In addition, the hard drive is not displayed in the Explorer, although I did not help.

On this disk I had already removed 3 disks in the device manager and completely separated them physically from the system. The data is saved, completely together in one piece, but "not assigned", without drive letters. then deleted the partitions. installed.

Now to my problem:
The volume is now not helping as intended, I've already tried. For the sake of completeness, it should also be mentioned that the one created by Win 7 can partition into a "simple volume" and not into a "primary partition". In the disk management it is shown to me again after a restart. Backup partition "Recovery" has now also become a "simple volume" after the maneuver I described above. I can't initialize this volume, and it's back in the device manager, but not in explorer.

Plate so good. But that disturbs partitions whose size I wanted to change. So far "unallocated volume" in a primary partition? But has

That did not work out, this seems to me the wound punk ... Continue reading ...

Sources:
http://www.pcmasters.de/forum/71345-festplatte-usb-gehaeuse-wird-nicht-erkannt.html
https://www.drwindows.de/hardware-and-treiber/121905-interne-festplatte-externe-festplatte-gehaeuse-erkannt.html
https://www.drwindows.de/programme-tools/120659-externe-festplatte-neuen-gehaeuse-erkannt.html
http://www.pcmasters.de/forum/109785-bh10ls30-von-lg-blu-ray-laufwerk-intern-wird-ueber-usb-nicht-erkannt-nach-umbau-externes-gehaeuse.html
http://www.pcmasters.de/forum/34805-externe-festplatte-festplatte-von-laptop-wird-nicht-erkannt.html
https://www.win-10-forum.de/windows-10-treiber-and-hardware/19524-2-festplatte-mehr-erkannt-pc-ausgeschalten.html
http://www.pcmasters.de/forum/6855-ide-festplatte-wird-nicht-erkannt.html
https://www.winboard.org/win7-hardware/131295-2-5-ext-festplatte-wird-nicht-erkannt.html
https://www.drwindows.de/hardware-and-treiber/92678-hdd-festplatte-erkannt.html
https://www.drwindows.de/hardware-and-treiber/119645-wd-festplatte-erkannt.html
https://www.drwindows.de/windows-7-allgemein/109076-festplatte-erkannt.html
https://www.windows-7-forum.net/threads/ext-festplatte-wird-nicht-erkannt.16311/
http://www.pcmasters.de/forum/28883-wd-320-gb-festplatte-wird-nicht-erkannt.html
https://www.winboard.org/win7-hardware/125943-festplatte-wird-vom-os-nicht-erkannt.html
https://www.win-10-forum.de/pc-fragen-probleme/66983-2-festplatte-ssd-erkannt.html
https://www.winboard.org/vista-hardware/118055-ex-festplatte-wird-nicht-erkannt.html
https://www.drwindows.de/windows-10-desktop/126207-festplatte-erkannt.html
https://www.drwindows.de/hardware-and-treiber/131688-usb-festplatte-erkannt.html
https://www.windows-7-forum.net/threads/3-festplatte-wird-nicht-erkannt.23840/
http://www.pcmasters.de/forum/104499-1-5tb-festplatte-wird-nicht-erkannt.html
https://www.drwindows.de/windows-7-allgemein/130961-2-festplatte-erkannt.html