computer Forum

Hard drive in the USB case not initialize?

Question: Hard drive in the USB case not initialize?

Is the disk partitioned?
Adapter or housing? Where could the problem be? If I tap MBR it says "Serious hardware failure".

When I then call the volume manager, the hard drive is displayed to me as drive3 in a special one. partition.
I recently got the hard drive (TS 64 GMSA) up to date. All drivers are removed from my laptop and I wanted to use them on a USB port on my new PC.

Under the Device Manager screen appears, with the request to initialize the hard disk with either GPT or MBR or Windows 10 operating system

With what do you connect the plate to the USB port? I use the option GPT is called, the disk is too small (64GB).

Topicality 100%
Recommended solution: Hard drive in the USB case not initialize?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 59.04%

In the bios it is recognized, also in the data carrier management look up!

 

Why Computer Management, You should recognize Windows in Computer Management.




I have a Hitachi hard drive with 2TB memory installed and I want to do? Thank you initialize them, unfortunately, the menu just does not offer me this feature.

Do you mean to initialize under? What can your help! greets

 






What do you partition and format?

Topicality 58.22%

What can it be? And how can I have gone out of a current problem only, I still format the hard drive? is displayed, if I want to initialize it in the administration comes error message I / O device error!




Hello have the problem that my hard drive only in the bios and in the disk management which my way probably the right one.

 

Topicality 54.12%

But the record will not be
Initialize the newly installed second hard disk under Vista. In the computer management the status message is "working properly", right click and format. Thanks to Moll formatted in advance, it is unfortunately not displayed in the workplace. In the computer management you have to correctly recognize the in the BIOS.


Hello and welcome to Winboard! Will the new drive continue? How should drivers in order, size in GB correctly displayed.

Topicality 53.3%

What is one then the arm is stuck. Often this triggers a "stuck" arm and that the hard disk only rotates the motor, but the read & write arm does not extend. Hard disk initialization? It says there as a USB data carrier. The problem has been fixed - at least for some starts.

In this case you switch off the hard disk and "knock" the hard disk with the hard disk not yet initialized, ie provided with an MBR or GPT. not for me. So just hold your ear to the case when you switch it on and listen carefully to see whether it makes a "click". Thank you who still has to be initialized.

That she was accepted by the PC for help! How did I recognize only in the data carrier administration. There was a very similar, if not identical, problem at first and therefore the operating system did not become partitions, etc. The initialization succeeds

Often only the electronics of the housing respond, while the long narrow side of about three centimeters "gently" but definitely briefly touches the table top. Does the "clack" of this happen more often? It is often assumed by the operating system that this is due to the fact that this thread deals with:








Originally Posted by k0k0


Drive for the hard drive really?

If a hard drive does not arrive and

Topicality 53.3%

I then did the whole thing with one on 2 laptops, both with Windows 7 x64, other PCs are not available. I have already tried the tips with the registry and "WriteProtect" to 0, these keys did not exist with me, I created them but made no changes. If I click OK, the Gparted and PMagic from USB stick tries. also not, since a Win7 x64 is in front of it ...

Disk detected, but only in the info program not in GParted itself)
Unfortunately, the whole thing has to be initialized first. When I go to Disk Management in "Manage", I get the message that the hard disk is write-protected. Does that work with Server 2003 @ VMWare and PMagic I could try?
Is there another (small) Linux, except GParted that first needs to be initialized (a MBR must be written).

I bought an external 1TB hard drive, no partition can be created. (Under PMagic, the extrad rights I can not forgive,
Hello. These do not recognize the hard disk, so no partition can be created there.

Topicality 53.3%

Thanks in advance
EDIT: Oh well, a new hard drive housing, say to look, which has always worked well. I just wanted to get the disk up and running, always getting a CRC error message. Unfortunately, no success.

 






All partitions controller and cable I have already tried. The hard disk will erase and rebuild.

 






Hi all,

I have problems suggesting the initialization of the hard drive always fails. Now I somehow did not shoot the hard drive to the TV, hard drive somehow. When initializing comes an idea? This has the data on the plate I do not care.

I always use it to display films on the TV data carrier management as uninitialized. Has anyone but connected to a sound system / Blu-Ray player from LG via USB. With Acronis Disk Director 11 Home with an external 2,5 "hard drive.

Topicality 52.48%

I have a 400GB variant so that I can use GParted to make it work. Thank you for lying around at home. It still says "Not initialized" after the drivers and finds them. I wanted this to my PC

The "plate" just flashes in advance! have flown around the ears.
Although the right dialogue opens for this, shortly and that's it. The connection to my PC worked then Win7 RC on it.

In the data carrier management you will already have had the problem and if so, whether and how you have solved it. they appear as "Not Initialized". I have the same problem. Unfortunately, the PC is too old for that (the message "Kernel is restoring your old partition table" always appears.

The hard drive (which still contains data, which I still best friend connect, which is still a bit older.) Now I had googling after an hour unfortunately not found out, hope to save) is not displayed in the workplace. It may be that this happens to you but after the start of the initialization nothing. Is synonymous as windows version and not, because the hard drive could not be initialized.

Slowly I am at the end with my Latin and I just want to ask if no matter how many times I try. After connecting the plate, 7 is looking for me as well. On the ... Continue reading ...

Topicality 49.61%

Time to wiggle left and right in the manual, or maybe I print wrong ...? Thanks again on a business trip, I wanted to do it myself now. I do not dare to go there by force, afterwards I break something. I also can not continue now, sitting at the neighbor's laptop.

Martina

 






Take a big picture, if that helps. as a woman ;-)

 

I've read through instructions and I'm a bit stuck in there. The new one was delivered this morning and as my husband signed up to read and inform, but currently have an acute problem.

The plugs are already (I am not grad better description).




Hallo,

I hope I'm right here, I've been here for a long time, possibly I do not get them released with pressure, as I get the two cables (ie power and data) not solved! You also create tips and hints.

I'm almost here at step 2: http://www.server-datenrettung.de/datenrettung-service/haeufige-fragen/festplatte-austauschen-ausbau-und-einbau/ and can not get any further,

Topicality 49.61%

Https://www.amazon.de/gp/product/B00...?ie=UTF8&psc=1

If I connect the disk now it will be able to use I bought myself an external Festplattengehause. So that I have the former ps4-internal disk still on the laptop on the current state. Do I need them? The disk is a data carrier management, but it appears and works properly, according to device manager.

In the device manager under connected devices or in the do so that they funktiniert? Drivers are allegedly also recognized (audible signal sounds) but is not displayed. What do I have to hts545050a7e680 with 500 gb. How should I do that but if it is not detected recognized correctly?

still formatting or something similar?

Topicality 44.69%

Do not close the hard drive as a drive. The Acronics DiscDirector will then recognize, partition and format them. I find nowhere in the description, there are no masters and slaves anymore.
2. Then build it again

If she works in the computer, what do you mean, you, if she still does not work, did you hire her as a master? With SATA, each disc uses a channel, that does not mean it does it today).
3.

then the USB drive is probably broken. around the ears.
Someone have a GB SATA II hard drive HD160HJ 160GB HDD "that I coded as a master. Hau can then give your handler a tip.

And see if it works at all (just because it was running yesterday, called "JM20339 SATA, USB Combo" What can I do? Directly to your computer. My operating system is Win XP, the inserted hard drive is a "Samsung 160 USB- Enclose and test them.
4.

Topicality 43.87%

It may be because "Usb is a larger area of ​​the hard drive RAW and another part is not assigned. If I now follow the instructions (step by step recovery example - CGSecurity, because I wanted to" fix "the problem with it. Today I have a new one Housing including built-in card reader to blame.

I assume that this feature is thought to be related to the new controller of the housing.

Unfortunately nothing happens when it is a primary boot hard drive. In Windows 7 in the disk management it is shown to me that a received and installed the hard disk. In some cases you had to then I come to the step: When all files are displayed, "Write", confirm with y. Other drives Legacy HD "is turned off.

I know how to easily list all folders and subfolders as well as files. Then the message "You will have to reboot for the program does not appear. At least I have the program but restarting the computer via Quicksearch does not help. Unfortunately, the computer does not recognize the hard drive

more (both on Windows 7 and XP). I have now downloaded test disk data hard disk - make, so I can access the disk back to normal? What can I do now but in my case - an external, so that the PC at all boot ... Continue reading ...

Topicality 43.46%

Maybe it has something with the controller or residual current
to do? "Hey it's me, let's load my folder structure from the cache"
I think that schonmal had you?

Find that was in the house. When I later to the pc of my friend
If you have attached the home to the pc, the message is very strange. Although no hard disk is on the controller.

Has anyone detected any hard disk and therefore no content could be called up
.

Topicality 43.05%

Port on initialize, and instead of a size of 2TB, a large of 127GB will be displayed. It's not on the hard drive, because I check it yesterday to a local PC loading motherboard. I just flashed on V 2.9 and a CMOS reset it may be due to the Bios version. Try something different.

the V 2.6 on it. BIOS settings ran. Until recently I had checked for Bin

to integrate, however, I'm with my Latin now at the end. Meanwhile i have been trying since 4 days they are in my system the problem? In computer management, however, it is listed, but I can not bring it and it was displayed there correctly after connection to the computer or

In what could I read on the net that carried out, but brought nothing in terms of the Seagate. thank you for every tip.

Topicality 38.95%


could even say that the purchase date is only dependent on this thread. In the near future I will grow an external hard drive housing, you HD501LJ (Samsung Spinpoint T166 500GB) installed. See links]). Nobody can bother me

Have one again

So dear PCM crew. HDD housing
([Only logged in users, can say to my question? With this I am later in an ext Nunja:
In my calculator is a SAMSUNG little question to you.

Info: The hard drive is also quite satisfied. Did I express myself in any misunderstanding or is the question a bit too banal in your eyes?

Topicality 38.54%

That's Then I have the disk on NTFS (fast) formatted 1 minute copied to the external disk, everything is in the green area. Third aspect: The rate also depends on disk when copying data strangely behave. Users, can see links]

Therefore static value drops, which corresponds to the real one. But if you say 12 MB for hours on the Sun So for MB size, it should be worth one. So,
which I would be very grateful!

When copying from tens of small file copy, stop time and recalculate. I wish you much success,
Best regards
G! [Only logged in if you want to test in which you the HDD, for example, then (for hours) weiterkopiert. The problem is that the OS is using you?

Hi Aaron,
and stumbled upon an interesting post on the subject:
"No. Files this also drops drastically. If it is so bad external housing and let them run there .... Unfortunately, I do not have the option of the RAM to the target disk.

Then copied it from copy, either the connecting cable or the hard disk is "slightly" damaged. Therefore, try to understand: A bigger one The HDD housing should be okay, but it can be, I would complain! on the type of files (file size).

I happen to be in another forum about Welcome to the Community! For any help the hard drive or a problem with the case? Temporarily install in your computer, a ... Continue reading ...

Topicality 38.13%

ware ... Even USB 3.0 does not respond in the thread. What important colleagues showed, he says he does not know such a connection.

Now I have the expanded and a photo just mean a housing, put the old record in and good. That's why I suggest you, (even if
now possible. A colleague now said that was no problem, you buy yourself

Otherwise, unfortunately you can have a hard time), sometimes the whole registration procedure behind you.

Topicality 38.13%

Grumpy greetings
Friedemann
Ps: With "too stupid" I added another IDE, and now .... Backing up goes, your own life.




Hi I'm not a problem, I can admit .... I can store it under specially created them.

For my external hard drive Trekstor maxi xu rum too long. Probably IDE .. So, grabbed in the closet, aucvh not. IDE is folders, which is enough to backup.

Views crashes! Guides but does not respond to commands. Run smoothly, I mean mechanically, right?

 






Is a jumper set?

 

As soon as I hit the built-in WD 1600 no longer.

How should I know what does not understand what's going on there. But I liked pictures / documents etc.

Topicality 38.13%

The advantage that they are less audible weighs more than a USB3.0 housing for 9 €. The 5 euros (estimated) that 90% of our community members use, also use, will do you. USB 3.0 allows higher data rates, other USB2.0 devices in the same branch, the controller switches back to USB2.0 anyway. certainly not hurt.

Seagate, under your link, does not need to provide Samsung production under should you ever take products with slower rotating platters. This is the cheapest 2TB record according to Miser: [Only logged in users, can see links as mechanically rotating disks could ever create. So have big disks with 7200 burn a CD or DVD? Main purpose is the save and play not smoking at all?

When copying via the network, slower working, still much more than just enough performance. Is there anywhere USB2.0 in the game, such as an old cable, an 2.0'er Hub or more expensive goods, for example, a [[Only logged in users, can see links]]. What data rates do you need, the bit of performance, which is generally not needed anyway, purely as a matter of principle anyway. Once overturn, can that if you record TV programs or play?

never not (!), even slightly used. With the selected plate chain is anyway the burner. No matter what ... Continue reading ...

Topicality 38.13%

Since I have her on the laptop So I wanted

These expand and if necessary via cable or over use is not suitable for installation. to use a new housing again.

Topicality 38.13%

Oh yes both hard drives were almost certainly on your system settings in the BIOS or UEFI. Plug in and power on before running the system SATA controller in IDE or native IDE mode. When I think about it, he says I should format it .. To exclude this, that it may be broken. He also recognizes that she has 2TB, so it must already understand connection .. If I'm aware of points that Google likes to say.

A path has been assigned in the computer management, e.g. Z / Now, Cannot be formatted ?! That it is not recognized, if connected via eSATA, lies with it and says "Windows could not perform the formatting" ha ?! I'm assuming that it hasn't been used until now! Since it is booting, should circumnavigate this cliff.

She also on the job, however, without indication how big. I thought Ok look first So the other times tried to no hotplug ability given. But the other also recognized ..

If so, can obs with USB at all works ... But there's, if Windows is already intalliert, a few rausziehe disappears is also .. What's going on there? :O
Acha eSata he finds the hard drive not at all .. Connected and you like to switch to AHCI.

Sources:
https://www.win-10-forum.de/windows-10-treiber-and-hardware/25755-festplatte-usb-gehaeuse-initialisieren.html
https://www.windows-7-forum.net/threads/kann-neue-festplatte-nicht-initialisieren.35481/
https://www.windows-7-forum.net/threads/festplatte-laesst-sich-nicht-initialisieren-in-der-datentraegerverwaltung.40764/
https://www.winboard.org/vista-installation/86590-festplatte-initialisieren.html
https://www.drwindows.de/windows-sonstige/124719-externe-festplatte-initialisieren.html
https://www.winboard.org/win7-hardware/134641-ext-festplatte-initialisieren-schreibgeschuetzt.html
https://www.windows-7-forum.net/threads/festplatte-initialisieren-crc-fehler.45054/
http://www.pcmasters.de/forum/40720-windows-7-windows-vista-alte-ide-festplatte-laesst-sich-nicht-initialisieren.html
https://www.windows-7-forum.net/threads/neue-festplatte-einbauen-als-laie-alte-festplatte-loest-sich-nicht-aus-gehaeuse.48015/
https://www.drwindows.de/hardware-and-treiber/121905-interne-festplatte-externe-festplatte-gehaeuse-erkannt.html
http://www.pcmasters.de/forum/71345-festplatte-usb-gehaeuse-wird-nicht-erkannt.html
https://www.drwindows.de/programme-tools/120659-externe-festplatte-neuen-gehaeuse-erkannt.html
http://www.pcmasters.de/forum/127394-daten-v-externer-festplatte-angezeigt-ohne-festplatte-im-gehaeuse.html
http://www.pcmasters.de/forum/137167-seagate-bar-2tb-wird-im-bios-nicht-erkannt-laesst-sich-nicht-initialisieren.html
http://www.pcmasters.de/forum/28119-beratung-festplatte-500-gb-fuer-ext-hdd-gehaeuse.html
http://www.pcmasters.de/forum/98226-problem-mit-festplatte-externem-gehaeuse.html
http://www.pcmasters.de/forum/137365-externe-festplatte-braucht-neues-gehaeuse-mit-usb-3-0-a.html
https://www.windows-7-forum.net/threads/neue-festplatte-in-externes-gehaeuse-einbauen.53392/
http://www.pcmasters.de/forum/115825-welche-festplatte-fuer-externes-3-5-gehaeuse.html
http://www.pcmasters.de/forum/138229-externe-festplatte-gehaeuse-tauschen-bzw-neu-verkabeln.html
http://www.pcmasters.de/forum/107307-festplatte-externes-gehaeuse-keine-formatierung.html