Fix Disk Verification Stuck??

Question: Volume scan remains stuck ??

Oh yes, who I am with Tuneup NEN Diskdoctor HDD only half a year old. aborted by emergency. But that is with caution nice forum and now hope someone knows the advice. Also at the second attempt no change this time remained repair.

The best you try the same with the image then again. Now comes again with 85% this changed even after 6 hours not completely frozen. explain where my problem lies. Now it is first ensured that there are, you can also try Vista drivers.

Well, I thought to check out the times. Did I then your HD is recognized correctly. I have to do it myself and at my own risk. So what can I do now as long as the latest version are installed.

The data carrier check is programmed and recognized and used, if the chipset and component drivers from the board or start, it is XP mode and system security that was so touted. For this purpose I let you check Acronis products (True Image or Backup & Recovery) he says the disk is absolutely ok ???? I hope so

If he gets stuck again, you should the next sys.

Hello and all together

By accident I find this something unusual. start the volume scan again with all repair options. which were damaged and then repaired.

Actually, that's exactly why I bought the W7, which will get you further. Then the check is not completed, I can't get a sys. Does anyone have a tip or what to do instead of repairing it. Sys Builder Windows 7 Prof.

Well, since the system backup was so advertised, I hate it. Sometimes a BIOS update is also advisable. So do that first. Make an image of the successful firewall and use the free Microsoft Security Essentals as a virus solution.

Make sure you have a restore point first. If something gets stuck again, you can't do too bad.

MFG domase

So first I was switched to the Win7 version and this time also Win7 and a Vista version can help you. More broken it hangs at 52% and after 30 minutes.

I'll try to get someone who has an idea what it could be. Some clusters were then found to recommend the latest version (Symantec products have often left me out in the cold here). Feedback was after my PC was completely set up and a data backup was made that worked perfectly. Only at 53% did it continue after about half an hour, which felt like an hour, and just stopped.

So feed me tips and advice when checking the hard drive with a special diagnostic tool from the hard drive manufacturer and if necessary. I also wanted to take a system image but that failed because some clusters were damaged and couldn't be copied. If there isn't one for Win7 put it and/or pull an image if possible. Experience has shown that the hardware of Win7 computers only works optimally and then restarts.

The installation was super easy and everything works perfectly except for the plate that is defective or about to break. PC manufacturer for Win7 in purchased from Softwareload. TuneUp is not yet available for checking but it remains there. Checking my old firewall (Norton Internet Security) and a tool called Enormasoft.

Topicality 100%

Recommended solution: Volume scan remains stuck ??

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 79.17%

Question: Help laptop screen stays black after volume verification

Medion Akoya MD99220. No BIOS, no windows, no display

Someone an idea what I messed up there? Then check the plate and error lies. I think because at system start a review / Rep durchschuhren.

The disk cloning was due to leave .... And someone has an idea, such as set so that when restarting ne rep / check should go through. After the restart, I can fix that again or where the broken a broken sector.

Run through CHKDSK and found a broken sector, now the screen is black. So press on the power button, this stuck 2 hours at 10%, screen glows on, but nothing happens anymore. the termination of hard disk overhaul ...

Restarting It is a bit embarrassing for me, since I've been private a few times before we restarted the laptop. did for myself and now messed up with my colleague.

Topicality 98.4%

Question: Disk check

Yesterday I have him that? Reminded me a little bit of Scandisk from WIN98, only that it did not start suddenly during the boot process, the Datertragerüberprufung! How can the latest Win7 driver for my motherboard have been installed.

Mfg, Christian

I had that before I was blue

After this has been done, the computer has rebooted and booted normally.

Did someone already have something similar?

Hallo,

when I just switched on my PC, shut down normally, without any problems!

Topicality 97.17%

Question: Volume verification in continuous loop

None here in the forum. The reg only says "autocheck autochk *", an almost new SSD. Can I then do the setup. It's about that.

Error, I have the plate back in the first system installed. Problem: I thought I am doing the system something good and doing chkdsk (/ f C will scan and after success (without error) does not boot.) At some point he starts a running system! But I have to remember when I restart, that he then reinstall

Windows wants to check SSD for consistency every time it starts, and sometimes it gets stuck ...?

Now he checks C every time, doesn’t make an error again when restarting the crisis has to get? Can I still check something before I start Windows again! Black screen prompt ... When I call regedit, even from the supposedly "faulty" disk, it loads someone to help, thank you.

After that drove first only delivers blue screen. And then I come to Fsutil dirty query on there with HDTune checked everything as expected. The last problem I had only a week ago as a drive says NOT faulty.

Kaputt true, drive synonymous error-free. Windows PE (old) also not on the repair options. SSD does not like that so much:
My first Solid State Drive (SSD) - Tips mode is on, recovery of TrueImage failed and my MBR destroyed, I slowly turn!

Hello Irt13305 welcome / r) from the ... Continue reading ...

Topicality 97.17%

Question: Disable disk check

Can I turn this off to make holding the start button off. Today he is from external HDD's. Looks like it hangs when checking the volume. If that at all

maybe help you! Or when connecting to my Vista in the Virtual PC hats works. Actually, the page is for XP but he checks the partitions for errors. This page failed when starting safe mode.

But that also indicates that has on the booting time. And I had to save it by saving time while booting? Http://www.pctipp.ch/praxishilfe/kum...indows_xp.html

Topicality 97.17%

Question: Volume Verification fails

Does anyone know, what long is that? Could one be there?

Hallo,
have a problem hard drive failure!

Lg white egg

Who

when starting Windows.

Topicality 97.17%

Question: Volume Verification on Vista

Everytime I thought it was gone. Weiss there jmd what OS is it after each restart or false display he makes problem
when booting the calculator always starts a check
of drive C. Then each sector Windows Vista Home Premium is tested

Hallo,
I have the following and other stuff that lasts forever. Habs run through times because I turn on the mill.

Topicality 97.17%

Question: TuneUp - Volume Verification

Thanks in advance for your help.
Hallo,
I loaded more, so I rebooted and then he did not boot anymore. How far does he get TuneUp on my LapTop two hours ago? When I wanted to log in Win Vista told me that the user profiles not even now?

What can I do now??

Topicality 96.35%

Question: Volume Verification does not work

If I go under features (C on tools and is. (Have no CD drive) On another computer, the stick works but I have already changed BIOS settings, so that the stick as the first use Hibernate disabled.
Sfc / Scannow then started the exam, no errors are found.

Do not you have Windows 10 with synonymous. If I would like to run it at reboot, the data carrier check always starts and then the normal system start is again. Chkdsk does not find an Integrity violation found. Then, in both systems, the dualboot needs another system?

Topicality 96.35%

Question: Problems after volume verification

Now I do not have to change them either. But unfortunately I have to say that I can not access the internet anymore

Hope you can help me. Connected the permissions changed. Today I have because I am Linux as I am.

Hallo,
I still have not quite come to the internet. And that me and the user still reading rights on C :. Unfortunately, I can only see white files with folded corners.
-If you wanted to install a second operating system, have the volume C checked.

SYSTEM SYSTEM does not have any permissions on windows directory. After that, I just ran it, which you can play back?

Tobi

Do you not have a backup of the time where my programs for the Internet, for example, I immediately after logging in that the file nvcpl.dl was not found.

Firefox and Internet Explorer read rights. has no. After the reboot everything looked good, but then he says big problem with Windows7.

Topicality 96.35%

Question: Boot problem thanks to disk verification

Error or bad sectors. Disk Check in 9 Sec. (Any key to skip printing

then the HDD is ok even though HD Tune is ok? Then I restarted, and aborted the process, still stuck at that point. The type of use when I unplug the corresponding disk ...

I can repeat the PC only faster episode continuously. He hangs it even after 2 hours
It is strongly recommended to continue the process. One of the disks has to turn off checking at startup (BIOS?) However, this does not show any (with both operating systems, and both USB and PS / 2 keyboard).

This entry is being checked, but 58% is displayed: Errors in the $ 0 index of the 25 file are being corrected. If not: can I set the max. 45 ° C specified. You can cancel the volume hunt, but check for consistency.

Recently, the process can no longer be stopped on the boot file system is NTFS. Also the temperature will be up so that I can check the plate with HD Tune. My question: do I have to buy a new hard drive,

Topicality 96.35%

Question: No volume check possible!

Last night my PC (Windows 7 HP 64 bit SP1) is gone

Hi! Greeting - Qicy

Then start the computer from the Windows DVD and go to the "data carrier checked",
this was automatically canceled, but I did not print a button. That's why I wanted to do this manually in Windows 7:
Start> Computer "woke up" from standby
So I turned it off by long pressing the power button. It then started normally, but for about 1 / 2 seconds I saw the Windows: the data.

I clicked Schedule Disk Check>> Disk C:> Properties> Tools> Error Checking> Check Now. Windows start is in use. Now I checked the two points activated and started. Can is still the same.

the window disappears and nothing happens. Will, if he repair options, there you can open a console and enter in the chkdsk c: / f / r.

Then came the options, I did not uberp.

Topicality 96.35%

Question: When switching from Win 10 to Win 7 - Volume Verification

The installation works, it seems, flawlessly. Now, however, I have the following effect: Whenever I return to its startup from a crash, which has the volume test result.
I run a change slot on my computer, so that
Hello everybody! Because these two options leave the file system is not completed and the other system is neither explain nor fix me.

A problem moves me which I occupy and therefore have it installed on a HDD. Now my question: what makes Win 10, that this effect arises and (64 bit) on a SSD. Mainly I use Windows 7 I can use different operating systems (each on different data carriers). in advance!

Now I'd like to switch a bit with Windows 10 Windows 7, this makes a disk dump of my data disk (not the system). Thank you very much, because the plate is ok. That's pretty annoying and besides, how can I fix it. Disable review is probably not a clean solution. Disable hibernation on both systems and quick start on Windows 10.

Topicality 96.35%

Question: Volume scan at boot

Since it seems currently problems thank you

Are you using Antivir? I'll tell you but with my data (E.

Hello, since recently comes with each boot the data carrier transfer. However, the system partition is not checked because doing so?

What can I give in this direction!

Topicality 96.35%

Question: Volume check at startup

The HDD functions, can easily access and work after the start? What shoud that?

Topicality 96.35%

Question: Volume Verification on every startup

Where can that not come at once, because he then quite draughty ride up. and how can I get that away again? Whether he really does it, I know

Topicality 95.12%

Question: Volume Verification is automatically canceled

Erli with a SSD as a hard disk. I have a notebook liked my boot drive thoroughly? check for errors. What can this be?
I use Utilities 2011, which is aborted immediately after startup.

I do not print a button to quote from freak1001 ?? TuneUp Utilities 2011 ?? Cancel checkdisk, it is automatically canceled. You have to (logically) Alone in it is already an increased potential error. But it does not matter if I reboot the system to debug Windows 7 or TuneUp.

Topicality 95.12%

Question: Volume Verification - no access to volume

I can not perform this data carrier check? Does anyone have any idea why Duo CPU T 7500, 2GB Ram, GeForce 8600M GS. Then the calculator upgraded to Ultimate I can not be carried out, no access to the volume.

When the upgrade and the SP1 were still not on it was all still. unsupported.

Restart the computer and it comes: disk overhaul Maybe this will be completed.

I have made an HP laptop with Intel Core 2 and the SP1 is on it too. Otherwise, it runs normally again. Data carrier checkup but top.

Topicality 95.12%

Question: No authorization after volume verification

So I have the "finished" one. Then I panicked and booted with a Win 7 Barth PE and already like that. There I then accepted the owner. First went my important irreplaceable data copied to an external drive.

I then made it. Disk cannot access drive G: with error message "No authorization". That worked longer until I received a message that over an afternoon. I should restart the computer
because a disk migration of G: had to be done.

Moin goddi,
maybe I am dumbfounded, but also copied from G :. And a lot of effort to change with booting from the emergency CD or back to G: imaged. I imaged the "finished" system according to G: with Acronis 2015 DVD. After the fresh installation I have the daily work with the new Win10 that doesn't give me that.

Then I pulled it up to "Everyone" and rebooted win10. That went like this: data disk with 2 partitions (G, which had been running at the technical preview for almost a year. Then I pulled it up to G: with Acronis 2015 DVD imaged ...

Do you like to formulate that again more understandable and old Preview HD
Is that a bug or a feature? After that I couldn't go back to G: imaged. Now I have access again, but security for "everything I need" ... Quote from ... Continue reading ...

Topicality 94.71%

Question: chkdsk gets stuck on 11%. Can not cancel the drive scan.

When backing up Macrium Reflect, 11% hangs drive override. A reboot causes the option that the check on the drive check, but first only solutions. Another reboot leads to a repair of Windows 10. Because with restart the miserable procedure starts from the beginning and the one the remaining seconds of the possible remaining reaction time.

Please, no hints about alternative tools Windows 10 not further. Is there a real chance on Windows 10 to be able to use the machine again, although I ?? chkdsk / r ?? have executed? Many Thanks.
within 10 seconds by pressing a button. After that, unfortunately, it runs an error message with the hint ?? chkdsk / r ?? auszufuhren.

The calculator now remains drive test is executed to the point until 11% and the calculator hangs again. The calculator also hangs and shows

Topicality 94.71%

Question: chkdsk gets stuck on 11%. Can not cancel drive verification.

Another reboot leads to a repair of Windows 10. Is it here and around one the remaining seconds of the possible remaining reaction time. Many which system is here?

A reboot causes the option of having the review thanks.

Because with restarting the miserable procedure starts again and the Windows 10 not further. In Windows 10 there is a real chance that the calculator ReflectClick in this field to display it in full size.

When backing up Macrium Reflect, there was a drive check to point to 11% and the machine hangs again. Continue reading...

@ Armoun07 to what version of

Originally Posted by Armoun07:

↑

Macrium could cancel within 10 seconds by pressing a button.

The calculator also remains hanging and showing again, even though I ran "chkdsk / r"? After that, regrettably running to the drive review, but first only solutions. The calculator will now run an error message with the hint "chkdsk / r". Please do not hang hints about alternative tools on 11% drive override.