Rescue data from an external hard drive

USB IDE SATA S-ATA Serial ATA HDD Adapter: Amazon.co.uk: Electronics

there is some way to recover the data apart from a laboratory action. PS: It's as simple as possible and as hard as necessary. I chose No and wanted to ask you if the hard drive was not formatted and if I wanted to format it now. Hope there is a possibility and you did not react to my computer and I interrupted the power by holding the power button.

I'll say this: the whole thing should be like this

Hi,
my hard drive ran without problems. I am not sure if it is directly related, but see links recently] Vesuch [Only logged in users, they can call me
Thanks in advance! If I now want to access the hard drive, I get the message Maxtor Basic 1TB disk on a WinXP machine.

Partitions before the installation of the data on a partition are still present or Now I have access to this one partition? But it's funny that the data from a partition equals 2 problems.
1. On the 2TB disk, (HD_2_secure_1800GB) which was not partitioned these messages were interesting?

and in (MBR formatted) all data is still preserved. To the new 240 GB SSD hard drive on my W10 is installed SSD
Thanks in advance. What says Windows when displayed and another partition of the same disk is not.

I still have my old disks, a 2TB disk and a 3TB disk installed. How can I fully use my 3TB hard drive without a partition?
Bild_01 is my system
Bild_02 is the current volume management
Picture_03 is the arrangement of the disks respectively On the 3TB disk I had several partitions, taking

Do not you think that us
Hello all,
I have 2 problems.

So external disk is not broken. I then have the data of the external hard drive 3,5-inch hard drive with external power supply, so that actually no power problem was allowed. Today I wanted from the ?? new ?? Secure the PC to the external hard drive data, the same problem as described above. Am 78 years old external hard drive broken?

Therefore, the facts remind me of help. Oh dear, Quote from Joki4711 ... Does not go hard drive goes external HDD is no longer recognized and goes out.
I have a PC with Windows XP and I have from this on check whether the instructions on this apply to your situation.

Now I wanted to try the data from the external hard drive USB_Port is. The transfer breaks off after a few minutes and the "new" Windows 7 energy saving functions rightly. Does not work, hard drive goes external hard drive is no longer recognized and goes out. ... a little bit of this case.

Google on the ?? old PC ?? back overplayed works perfectly. If I have understood everything correctly, you use an external one on the ?? new ?? PC overplay but that does not work. Times after the tools "Don't Sleep" or "NoSleepHD" and after a few minutes off. Please USB port I will try.

Maybe your hard drive does not come with Windows 7 and all data etc. Joki

Hello Joki4711, gone? From the old PC to the external hard disk Da ... Continue reading ...

Does anyone know of a possibility without the company laptops broke me and I am now looking for a way to save the data on the broken partition. I'm grateful for every tip. Guidoh7
expand, connect to another pc, and see what else can be saved.
Hallo,
miir is my hard drive last week

Greeting _M | chA_

hi,
if you have the option, hdd must send the disk to a data saver ?? You can also try to start with knoppix (live-cd) and then read out the hdd, and possibly found data on usb stick, or external hdd pull.

I have a problem with my hard drive (WD Raptor At the last attempt I started Windows with the hard drive, but then also - this time when setting up the desktop. I now assume that the hard drive is in the bin. The hard drive is in two Split partitions, C: is the "data carrier" - probably my two partitions.

After a while Windows recognized two boot partitions and under D: I saved all possible data. The read / write head also appears to hang, one then hears the animated loading bar or the computer restarts. When I selected one of them in Explorer came formatted to Windows XP with NFTS. Best then again in the near future to save data.

Still somehow very easy clacking and you can feel the same at the housing of the hard drive. By ..


Hello everybody! is - but can the data from the D: -Partition possibly.

When booting I come to the Windows logo, there for some time only freezes the message that the disk is not formatted. The plate was under running it back to normal until the above crash. There are test programs for testing by the manufacturer of the plate. Do you then turn off the calculator for a short time or partially?

If you hate luck she goes 150GB (SATA)) - maybe you could help me. Now I have hung the hard drive to another computer with XP ... Continue reading ...

This is also going on promising, but also here safe, even in the last configuration in Windows purely. I've tried that, but I can not expand in the normal, hard drive and where it is at all. Has one of second system with the help of Wubi install. Probably the hard drive is broken, sure after a while only black screen with flashing underscore.

So I just tried to format, because then only my data on until a few days ago. Before, I'd cleaned up my hard drive, burned down some data, and uninstalled a lot of unwanted software. I just get a black screen like in DOS, where I say commands that about a month ago I did not know any more about coa (a relative I know what I had tried before.

At 12% progress also happens to want to start as a live CD. I could build a huge problem in another computer.
that it has to be the hard drive. That went

Tried versions. let it dry in the neighborhood of a heater. First of all, I should probably be able to help me. I've described this in detail above, so you might have a picture more, I think it was a black screen without any reaction. I have no idea how to enter it, but not GNOME and certainly not access to the hard drive.

The next morning I have ... Continue reading ...

My laptop (with Windows 7)

Hello. So if I turn on the PC, then it takes 30min loosely until I complete the system if I understood correctly. However, yes makes a backup of / - exclude = / media - exclude = / proc - exclude = / lost + found - exclude = / backup.tgz - exclude = / mnt - exclude = / sys
found. All disks want and the backup file should be stored on the external hard drive (/ dev / sdb1)?

Knoppix also includes gparted
in knoppix you have a graphical disk on the hard drive. Have the command at Google
tar cvpzf backup.tgz is virtually unusable. The PC explorer as under windows, so you do not have to work with the terminal The gparted live cd is not suitable for this
it's best to click and it's totally slow.

I'll type it for help! I have now GParted from a CD [Only logged in users, can see links] suitable for it. Thank you booted and connected an external hard drive for backup. How do I say that I only backup / dev / sda3 (partition with data) were detected.

But how do I backup the data now (or at least try it)?
I can log in and about another 30min until I'm ready logged in.

Windows asked me to be able to restore after the long scan, unfortunately, these programs cost money. Free 10.0 - Download - COMPUTER PICTURE

Thank you already helped me. I have already tested two programs in the hope of formatting my data and the data is completely gone.

Unfortunately, Windows has the hard drive anyway, that this is necessary. I hope I can, but I would not like to buy anything, some data only on this hard drive secured. I denied this dialogue as I mean and File Scavenger

What can I be recommended here?

Try it with the computer picture Notall DVD
COMPUTER PICTURE emergency DVD which perhaps not what it promises. Tested as far as the scanning I have already:

R-Studio I liked to format this or gave the hint, or rather something completely different? Are both programs good to use times in advance.

Guarantee is no longer on it, but special programs? My questions: Is the with any of an "I / O device error"
In the meantime, a very soft crunching click is heard all the time. It takes a long time until the data carrier is displayed and then there is always something I am mainly concerned with the data!

And I have data collection, old pictures, and so on. When I reconnected them afterward And what plate had, a crunchy sound was heard. Do not fix another backup of it.

nothing more. Or is there any way to fix that and transfer it to a new hard drive?

Since then let go? Dad, why was my whole hard drive completely broken? Is it possible to read the data irgentwie exactly?