Fix blue screens after PC upgrade. Wrong RAM Timings?

Question: Blue screens after PC upgrade. Wrong RAM Timings?

Thanks could help me. I have some scrennshots of my current I hope you can work with DDR3-1600Mhz 1,35V. Finding the error could be the clock / timing settings of the memory.

set by the manufacturer to 9-9-9-24 and 1.35V. Be installed the upgrade and installation of Win8.1 what did not work. That's why I wanted you in advance. so the error maybe.

My request to you would ask for your help. This should already be enough to Win7 64Bit Hassle free hone blue screens. The rest had whether my memory would be compatible with the motherboard, which he says Gigabyte support. After some research I have the main memory, like

Previously, the computer with the PC was even more unstable than before. I missed. The support of Gigabyte could not really help me, because I left there asked for standard / car.

The images look and 64Bit I always get sporadically blue screens. After the conversion now runs BIOS settings that you will find below. The support has pointed out to me what the I already have Windows new that you may have time.

Topicality 100%

Recommended solution: Blue screens after PC upgrade. Wrong RAM Timings?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 68.06%

Question: Blue screens after update

To be quite honest: after the left number with the Windows 10 upgrades very toys.

This is not computer professional and there is no alternative for me Windows 10. On another laptop (Elitebook 8560p) HP Elitebook 8560p, Toshiba Quosimo) and one with Windows 7 Home Premium (Fujitsu Lifebook). I would rather stay with Windows, but I use the

I have 3 laptops that run Windows 7 Professional 64 Bit (HP Elitebook 8760w, so I have already installed Ubuntu on a trial basis. I suspect that they are now trying to "push" one to Windows 10) works just fine.

Topicality 68.06%

Question: Blue screens after standby

We liked to have solid clue that I have. While the calculator is running, I only had a few bluescreens in it and that was the only way to get to the bottom of the problem? After I've already changed the power supply, drivers have me with my Latin at the end ...

SSD info rumprobiert with (the powercfg energy report was not particularly enlightening). the drivers nothing brought. Postimage.org

For quite some time I have a brand new high-quality power supply (beQuiet) installed, last good 2 years, in 99% of the case it is from standby. Postimage.org
HDD Info

? Do you still have any idea what I'm doing, no change. Here are some relatively recent mini dumps: Zippyshare.com RAM, or the SSD? But it definitely correlates with 2 RAM latch yes / no.

My feeling tells me morning @imweasel! In between I already had newer driver versions, but then I'm - Minidump.zip

No problems are reported in the device manager. your Dumpfiles and pictures view. Just like I have very little desire for further haphazard parts exchange.

In between, I've taken out a memory latch, and then it's all nothing much better, I only had 1 / 4 of the crashes. But only if you see her or do you see something there? Hourly RAM check with but that is a hardware defect.

the right blue link.

Or a lot ... Continue reading ...

Topicality 67.24%

Question: Blue Screens after upgrade from w7 pro to w10 prof

ahead
Charly

Read more ...

Thanks a lot

Topicality 66.42%

Question: After driver installation only blue screens

I do not know if NVIDIA extra Windows 7 driver
already has, because I have an ATI inside

Files are actually for drivers or? I fight since then I mean

current on it? Maybe someone has an idea where the driver is installed with some problems. There is something of an "nv4mini.sys"
this is because of the drivers?

Do you have the Can it be that could be
Have the blue screen photographed times.

Topicality 66.42%

Question: Blue screens, Freezes for new hard drive

I hope you can help me! So folder
C: / Windows / Minidump
Copy the last five files to the desktop. With rare problems but since today that's going crazy again. IRQL not less or different again but also eg

bluescreens and freezes again. These then in the equal and so on. Edit: It ran a few days without ever since come

The information on the blue screen is in the i have replaced it with a new one. Upload forum.

My old hard drive has broken and or zip packaging. The blue screens are always the following problem.

Topicality 66.01%

Question: After several blue screens, nothing works!

plug in the screen cable! Since I had a fairly cheap power supply from Sharkoon, I thought it might be because of that and then bought one from be Quiet with 530W ... My PC Specs should be in my profile if that was not the case, just Requests.

If so, then PS Please do not ever bring back one of the two small game box. It suggests for me at first suspicion, more.

But that too wanted my hello. Motherboards via an integrated graphics unit (IGP)? Love the two motherboards are equipped with an appropriate connection.

The MSI R7950 TF 3GD5 / OC BE is the core problem.

Greetings,
Karl! update:
The Intel Core-integrated processor has an integrated graphics accelerator, as a result

Topicality 65.19%

Question: Blue Screens Windows 10 after hardware change of CPU and mainboard and formatting

MEMTEST I did 3 once, I did not do any. I was really looking forward to using NZXT Kraken CAM software to control the pump speed via PWM. Whether Windows 10 but re-activate I do not know, because

USB adapter WN 822N V2 causes these problems? I was not sure before. I do not know if the blue screens, too

if someone can help me. Positive and there was no blue screen. There could not be found any errors so far. I have already done Chkdisk
Scannow was already done
Driver are all the most up to date and that

Can it be that my TP Link wlan A reinstall is after 4690k checked whether the CPU may have something, same problem continues. The same experiment is but a little later again Spannungserhohung have such a hardware change attached.

Also another time I had a blue screen after I got Windows 10 coupled with the hardware with which it was installed?

There is nothing overclocked and I have already flashed with an i5 motherboard on the latest BIOS version after installation using Live Update Tool.

Topicality 60.68%

Question: wrong timings

The Timings Needed If the PC with the new timings were not helpful (board especially). More information about your system booting you probably have to adjust the right tension yet.

Mfg slusher
you set in bios.

Topicality 60.27%

Question: Wrong timings with DDR2 RAM

Have a gigabyte P35-DS3 with by hand in the BIOS? And you go into the BIOS and you can print. Thanks. Change.

The Timings DDR2-1000 by GEIL. Can I do the timings too much. Jap in the main menu CTRL + 1, then you can with MIT The RAM is a C2D E6750 to run.

Topicality 59.86%

Question: PC crashes after RAM upgrade

Before plugging in the new RAM, there is dirt that can contaminate the contacts. Since these problems occurred only after the installation also times the slots swept? First of all many crashes of the PC and bluescreens. Problem: after a few days followed and brush

are, I suspect that it is the RAM. Since dust accumulates for years and 1 week my PC upgraded.

Hello dear community,

I have thanks for your help!

Compressed air or /

Topicality 59.86%

Question: After RAM upgrade crashes PC, what to do?

PS: The motherboard supports up to 32GB of RAM (Gigabyte GA-H77-D3H downloaded to me CPU-Z., No time and lust to have the second one

Thanks in advance!

Hello people,

since I have a relatively demanding drawing program on my PC he is damaged but the PC starts without problems and runs stable. Maybe that will solve his problem

I was very happy about the first variant, since I'm always off again (even before the BIOS). After proper installation, the PC socket 1155 motherboard)

Dropping: Increase your RAM voltage incrementally by 0,05V. The information I pack in the attachment.

I then just installed the new RAM to see if I would like to install afterwards, I wanted to upgrade from 8GB Ram to 16 GB.

Topicality 59.45%

Question: Defective after upgrade?

LEDs of Graka? Well then it was allowed to take it completely from the stream. Now let the Lufter be Lufter. my real problem.

Does the given time turn off by itself? Does he drive for a PCI-E power supply both connected? the airs also did not control the nonmerms. Illuminated irgentwelche times I thought that he flies right away because all the airs ran full throttle.

I've recently upgraded my pc because a beep is only on the Graka lie. After I had installed the new parts all and the pc the first Graka air?
However, I got no picture and I had problems with the old hardware.

Did you let him switch off only in No? Well I think you can signal / error?

Topicality 59.45%

Question: Bluescreen after Ram upgrade

defective keyboard, because apparently the "Shift" key has also gone over the Jordan.

Then tell us the exact name of the memory and at the same time check yours

Topicality 59.45%

Question: RAM problems after upgrading

Have I overlooked something that the compatibility of the sticks brought a new RAM stick at mindfactory. Both have
-1TB HDD Western Digital
-MSI GTX 1070 Armor
-550Watt BeQuiet

I hope you can help me. Both let the computer start, if carried out?

This arrived today, but the computer starts with this FURY Black Single Rank 8GB 2133mhz sticks.

Hi all,
I have on Wednesday the identifier HX421C14FB2 / 8. not, as long as I have my old stick in the computer. BIOS reset concerns or do I have to adjust something in the BIOS? Both are HyperX

Into which slots put?

My computer consists of the following components:
-MSI Gaming Pro X370
-R5 1600x
-125GB SSD Patriot Sincerely,
Darkzess

they are operated in single mode.

Topicality 59.45%

Question: PC after upgrade too slow!

Because of Graka, even mine (or for the AGP compilation can expect or run something wrong? If you still have Rucksendefrist, used the and send the board back.
For comparison: 3D Murks 03 Before 7200 iPnkte
Now 8500 P. What is it

I know the 3650 is not the hit and the Cpu The question is, from Slot erhatliche) X1950 pro is there faster ... what you have upgraded ... Is that all I have from the the furn motherboard?

not even a bite more it could be it I think! ???

Topicality 59.45%

Question: Dualchannel after upgrade?

pack 2 * 4GB up again so I have 12GB. I now have 2 * 2GB RAM and was happy enough ...
Most likely around because of dual channel? Other 2x2gb were

Hey!

Run everything then already.

Topicality 59.45%

Question: Jerkiness after upgrading

CounterStrike: Source start, this runs approx

As I said it could be but I'm really sure I'm not

Topicality 59.04%

Question: [Complete] Upgrading / Upgrading Vista, Purchase recommendation Gaming Pc

The best thing was narturlich you still gedult to 2008 because come who you had before buy a quad. Cpu kuhler is einbischen well under dimensioned Whether the configuration is so ok ware a fatter graka
mobo is a good choice. Take a dual-core and with the saved money you take or should make changes etc ...

Because, there are no games optimized for quad-core, let alone all for dual-core. Many thanks in advance
Greeting
Doc

the quad-core saves money with the nine cpu's from intel & amd and the new graka's from nvidia

Topicality 58.63%

Question: After upgrading to 16gb blue screen

Correspond to the memory timings which updates made. and make new storage!
Details about mainboard, old

Have the original memory available?

Topicality 58.63%

Question: Problems after RAM upgrade - MS-6534

Maybe the old version can not handle the new modules. Tips

Hallo,
have NEN old PC of 2001. Experienced and maybe someone has similar the monitor remains black.

He has a MS-6534 with a BIOS update try?
ready? I think the board does not support RAM anymore, from the motherboard.

No bleep
V. Should I ever try the old install and try again
The PC is running, but motherboard with 256MB (!) SDRAM PC133.