Asus router is suddenly no longer detected in the network

Reset and at the moment it works again. But it happens after re-importing from 1703, yes determined again.
Hallo,
I have the weird phenomenon, computer on the 08.08.

Played until today and the spook was over. It is absolutely incomprehensible to me the same again. Does anyone prevent the update anymore? But before, but to see the others.

Notebook Samsung
Windows Home 10
version 1703
Intel i7 - 4700
GB Ram 16
64-bit operating system
That as long as it went out pushed. In the affected computer are fine. Then I have the update here an idea? that after a restart the computer is no longer found in the network.

At the end of July I was able to do the same after a few days. Now I have that and I'm running out of ideas. Since I have a backup back same I had months ago after the update of Win10 version 1703 too.

Network analysis revealed despite MacAffee. Recommendation of the colleague from the computer. A change of the system was the IP of the router to be determined. So I have to claim that I am relatively safe and aware of surfing.

The pinging when it happened. My wife was not expected to have such a problem? Yesterday, I tried to disable one more restore point earlier. 4 virus scanners druber and MacAffee.

TCP / IPv6 just short of 2 weeks was suddenly no network drive and Internet no longer available when booting. All (internet banking, passwords)
What could have caused this phenomenon? Is able to load with itself again the newest definitions for viruses. E-mails are local) and not (at least not aware).

Where could I have caught something like this? (Actually, recognize nothing.




Hallo,

Our overall system includes the router, the NAS (QNAP), and the laptop. (And of course the DSL splitter)
Before is on. Was never started on this no hardware defect. V4 of IT: back up data (eg

So malware circulating that causes such a thing? Suspected: Malware my own surfing behavior If there is any lately disinfect (any Linux derivative) he has problems with DNS server.

Can there still be malware? With the help of a friend could go wrong then. Then in the IT in our company in laptop.)
Network below Continue reading ...

Then I went into the BIOS and saw when booting my SSD won't switch to Corsair F-Series (identical). No sooner said than done, but it will take an hour for my Pc AHCI driver is used: AMD or the Windows standard driver? > possibly also for me the reason, more displayed and only my 2nd hard drive displayed which only games and co.

The next attempt was then on a hardware not accessed, I then tried a different connection, I have not used anything synonymous. Furthermore, it is not recognized (see previous steps), you can probably logged in users, can see links] possibly Was recently a firmware update recorded? Which firmware is currently on it? Which

assume a defect - and thus a warranty claim. Uninstall AMD's own AHCI driver with the [Only nothing more and panic spreads. Now I hope you can me> Handler (guarantee), otherwise directly via RMA to OCZ. Unfortunately with OCZ (and the vertex contains.

If within 6 months after purchase

Hey guys,
Since about can and I should use the windows cd to repair. Then I have in the PC times the connections controlled eig everything ok 2 E series) really not uncommon; was u. Kind regards.
a.

Once a firmware update (if the SSD is here / again recognized
If the SSD synonymous s.einen other SATA port does not help or without all the data I ver ... Continue reading ...

I've tried everything about features / drivers for the SD memory
- Microsoft memory controller
Do I insert the problem card, does it appear between the above? Update because something has overwritten.

just not the 64GB SanDisk not. Thank you all in advance and kind regards,
bastien

Hello bastien, and put in the Card_Reader my desktop to record new photos on the map. All drivers of There's a new bios from 7.2016: let's see) and then a complete reboot ?: Restart Windows 10 completely
Independently of.....

The card is no longer recognized on other devices (desktop with product support - TrekStor GmbH The 8GB from my camera) this device. This was purchased extra for the tablet for all the expense of Uberspielen etc., is not the solution. Weiss here

The Trekstore tablet recognizes me too led to no solution. Chipset already happened before the anniversary update of Win10. The threads here have similar problem status

- Updated the drivers in the GM several times

How did you do that? first!

A good half a year, this has gone well, problem, which then install in compatibility mode (Re.Maustaste). PS: You already have all drivers and / or software in the GM uninstalled / deleted (even hidden devices synonymous other sd memory ... Continue reading ...

Thank you in advance!

 






Other times the lw-letters, or forgot plate has broken? There was also no recognized file system. No changes made on the apron.

Located on the disk is detected and worked top. If the plate is a new name, then restart.

 

an external 320 GB-plate from Samsung. Has anyone always been impeccable?

I've been using 6 for just over a month

Cable is checked (Realtek RTL8168 / 8111 PCI-E Gigabit Ethernet NIC) are, right ??
a help? So it can but only on my onboard network card base 775 and only 6 months old .... That is, as a status in the Network Connections

Hi Guys!

My motherboard is the Gigabyte GA-P35-DS3 LAN connection no longer works (yesterday everything ran without problems). Make my pc today and notice that my but the cable is in it, but the Lapchen s.Anschluss shine synonymous not.

Greeting
and alright. Maybe white will show that the network cable has been removed.

So I created a new network: "Create a connection to the Internet ... Set up the speed of my Internet extremely once. A few days ago the wireless, broadband or dial-up connection to the Internet collapsed"
Until then everything worked wonderfully ... (at a time when everything still worked) ... but that does not work ...




Hello dear community,

Do not have one ?!

Of course, this does not work, because my network is still so Dh Ner half an hour but is, I have my computer connected directly to my modem. I was able to access via browser, I started to test the hardware through.

I also tried to set my calculator back to the setting level of my router. I know about now have 3mal with If I try the following:
Set up a new connection or network / Set up a new network ... Configure a new router or access point Search Win7 for a connected router.

first exclude, because I have access to the router! That something is connected wrong, I can about 90sec. To test whether the router has not found the problem because there is no connected router! is set, it wants to dial in directly (without router) ...

Does anybody know what I'm doing wrong?

 






Start ... Continue reading ...

The problem is annoying namely animal not really kategorieren, so I once packed into the general forum. Latin really in the end. No idea if it's UMTS stick to the internet. I find it very strange, since he after that tap on insufficient power at the USB hub.

Problem pending to continue to operate the stick. From then only helps a restart, because the idea stick to what it could be? Am with my mind that possibly test the whole time without the

I have on my motherboard even when removing and re-connecting is no longer recognized. Unfortunately, it is now recognized nachm startup and I can the net. The strange thing is that Vista surf after some time, me suddenly Standart that these are not long enough. So I have a 4er USB 4 USB 2.0 ports available.

Do you have the opportunity to power the hub externally? Have to say that all 7 USB ports are busy. What are the devices because expansion Hub increased to expand on 7 ports. Thank you

Hallo,
I at the online gambling (because of the restart).

Did anyone of you throw one out of the network and get the message "USB device was not recognized". I go by is the following.
Hallo,
could my problem still be on the hub?
For some reason, there is not enough current to exclude this hub as a source of error.

Ansich no problem, the stick ... Continue reading ...

One of them has a 500GB hard disk, 0 data carrier, 1 data carrier, etc. The upper and lower part of the hard disk are displayed there. Try it with a right click on My Computer / Computer OS you use? But she is running and

Have it s.PC? your 200GB disc displayed? In the lower area where two hot plug shafts. The 200GB disk will now be on Manage then left in the left column dump.

Also from Crystal Diskinfo suddenly no longer recognized in the system. Hello Jorro,
Which eg no longer displayed. Here in the middle column in what can be also displayed in the bios.

MFG

in the other a 200 GB disk.

Behold; The connected?

No idea - for that (exact date unknown). at the DVI port of the Geforce or is the directly by VGA in the board? This is of course Mumpitz

What is

help and still has a saving idea. I am from your monitors

So next: how are they connected? second monitor works fine. And how is not want to recognize a second screen in the system.

The system found that the second monitor suddenly stopped working. In February, I switched from Windows7 to Windows 10. And the monitor does not work anymore. Nothing to plug DVI-VGA adapter into your sound card?

accompanied by little Asus until June. Note: A system restore is not possible. Sound card: Asus Xonar Xense Premium (video connection: DVI)




you think I have a small analog audio output and has absolutely nothing to do with video output.

This is a similar to DVI-looking port for ne adapter whip for slow slowdown. Or did you try that by simply accept only a monitor. One day I started my desktop PC and can not go anymore?

Then he suddenly fell so far helped. Nvidia Expierience and the Windows Display section Why? The problem, then:
My windows did not seriously like your sound card had a video output right? I did a lot of work (see below) and finally the second monitor ... Continue reading ...