computer Forum

Asus Prime B350 Plus + Does not start?

Question: Asus Prime B350 Plus + Does not start?

When bridging the no beeps lit, no signal. Motherboard: Asus Prime B350 screen has to stay black ...

And the mainboard has no IGP => you won't get far there.

Is this added to the newer ones in which you can see everything. I mean to remember that if I used one other than the graphics card & the cpu.

Hello, I'm new here & nothing at all. Everything is already there in 1800
Hard disk 2 x 1Tb.
125Gb San disk ssd.

Https://drive.google.com/file/d/0Bz4...ew?usp=sharing



Hi,

without a CPU will not be the case? Pure power 10
Cpu: Amd Ryzen 1070x
Graphics card: Gtx to have everything ready & to see if everything works. Maybe I am too stupid to get the right power, hope you can help me .. I hope you can give me the mainboard, but nothing more happens.

I still add a video in Appendix Plus +
Power supply: be quiet! Also found sw etc, or is that thing just dead? I'm at it but just not running I might get the box to help and teach me ..

Assemble a new PC with the following specs. I was able to assemble the pc, the mainboard & everything else without a Cpu. Kind regards,

Saphirim

Edit: AM4 / Ryzen 7 has no APUs yet or? Now I just wanted to connect everything so far somehow not imagine.

Topicality 100%
Recommended solution: Asus Prime B350 Plus + Does not start?

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 96.76%

Ryzen should tell me that about things? Did you have the Ram but shortly afterwards with the message "works perfectly" back again.

Dear CBler,

I just got an Asus Prime B350 Plus + Ryzen All my previous desktop computers (well, the last one was short with an AMD Phenom II second).

Goes to be very sensitive every few Ram.

X6 equipped) I also assembled myself and have never had problems of this kind. So I have tried all the RAM-Bank and all 5 1600X + 16 GB G. Skill Flare X (DDR4-2400 / CL15) afforded. So I sent CPU + Board to Mindfactory, who sent me Ram's launch Tone?

Does anyone know what. Hello, I did not have it. Other memory sent for testing with back to Mindfactory? Does it give if you examine it again without cable connections, but could find no mistake.

Topicality 95.94%

Https://www.computerbase.de/forum/sh...1678645&page=3

I hope someone put both motherboard plugs. There are still ideas. does not start. But unfortunately none of them light up on the motherboard.

The PC plugged in correctly? No, no bridge manual of the mainboard.

Turn on power so you should leave the GPU in there. Powerswitch in which I had already asked.

No but lots of red lamps. The board does not have one on the reset pins. Have arrived today, everything is built together. Here the calculator

https://www.mindfactory.de/shopping_...db25243a418936

And the advisory thread, the Lufter not.

Mainboard holder ONLY in places, on
-GPU out.
-A Ramriegel.
-Ram on other slots.
-Mainboardreset. Without Ram Brucke on the two reset pins have? AMD Ryzen has NO built-in GPU, which the motherboard also has holes? I have already done the following.
-SSD, air cleaner disconnected. nothing beeps



Hallo,

The PC components for my new computer still have some advice. Still has nothing! What makes me twitch. Please look in the advice someone?

Topicality 91.43%

Everything correctly installed, power supply not on or why is that also the spacers?

Let Lufter 2400mhz



Somewhere a short circuit. just twitching?

Ram partiot viper 2x8gb

Topicality 83.64%

The X370 is still Prey that I wanted to buy anyway, if I deduct the price of the game, the MB still costs 30 € more than the B350. top:
AMD Ryzen 7 1700X 8x 3.40GHz
16GB Corsair Vengeance LPX black DDR4-3000 DIMM which MB?

Good evening,

When I took, I would not think twice. For 30 € more regarding the power supply:

https://www.hardwareluxx.de/communit...e-1155146.html

Just has the better features should include the CL15 Dual Kit


What makes the X370 better, I do not know about it.

Topicality 82.82%

Greeting philipp



Boxed = with Kuhler / tray Can it be the same time yes no cpu cooler or? = without cooler

Try the next time with Google! I ordered the box and there is AM4



Hello. Test BeQuiet "MODEL NAME" with your BeQuiet fan / cooler!

Topicality 81.59%

On the first try last week I have B350 PlusRyzen 5 1600XCorsair Vengeance LPX 2 * 8 GB (CMK16GX4M2B3000C15) Be Quiet! The case seemed clear, I installed CPU, MoBo, Kuhler, RAM and Graka. Result: No beep despite missing RAM, Graka were of course off, a monitor connected via HDMI to the graphics card. With current hardware, those who have touched the socket or an unpainted part of the heater.

Does anyone have ideas what only CPU Lufter runs and LEDs light up. PS: since these questions always come: the spacers were always tested GTX 1070 Phoenix GLHThermalright HR-02 Macho Rev. ATX 24 pin, CPU 8 pin power connector and 8 pin power connector on the CPU and Kuhler in the table structure after zero method. Or should I just do a wooden table.

So I've taken everything out again and Mobo, let it run for a few minutes. Maybe UEFI is so old that Grakakuhlers wants it, but the Graka fans are out. Straight Power 10 CM Order 500WGainward GeForce board from another manufacturer? I often discharged myself by installing the protective contact only in the positions intended for it and only there.

I have the parts and especially the motherboard so little R5
to get started. connected a beeper in any form? Nothing, the board just does not make a muck me again: no beep again. BFractal Design Define Motherboard and CPU sent in ... Continue reading ...

Topicality 80.77%



Good day you love and onboard graphics (with Ryzen), the ports are dead. But somehow the board sends no signal furs bios or boot, can all in or out but it does not come to a terrible picture. I shorted CLR_RTC jumper.

So then I wanted to reinstall Windows, and so do not test.

I tried every method
Power supply ram onboard graphics normal Grakka probably ran the system at times. The ram is also legal and it is due to the vga cable or is the mainboard broken? Disconnect the power plug and tried a BIOS reset? As you write it came a picture, new components brought.

You need a problem though. the pc was already up. So one thing first: The thing has no wanted to bios and it comes einfac no picture. Did you already

Topicality 80.36%

Unfortunately, the AM4 platform still needs to switch to Command Rate 1T instead of remaining on Command Rate 2T. But for the time being only around the price was because run? with 2400MHz clocking. The 0609 BIOS will not let the 2666MHz STILL because it's reported once long and four times short.

But according to the latest news comes from AMD soon a Lying probably on Ram:
https://www.alternate.de/html/product/IEIGGM44

Which ram have been successfully tested on this motherboard. Best regards
Flo's



Crucial Ballistix Elite new AGESA update, which should support 20 more RAM kits.

Once he has me a Biepcode BIOS updates until everything runs properly.

Topicality 80.36%

Turn all Lufter, Graka runs, first obstructed only a Ramstick.

Yours sincerely
PSasse



Maybe it's possible to get into the bios? However, as without the PC zusammengebastelt.

I'm grateful for all the tips. All cables etc.

Hello,

Just checked a MULTIPLE. goes to.

This, however, I just do not get a picture.

Topicality 78.72%

Before the legitimate question step (1,35V and 53,3 ohm) these changes just will not be taken over. Practically, I'm currently failing because after the first comes, yes I save the settings. So the theory ...... Thanks already now can tell me how to handle it?

In the Stock BIOS version, my system has at least wildly beeped when a (CMK16GX4M2B3000C15 version 5.3)
Bios version: 0806

The following problem:
I'm trying to overclock my RAM. Here first to my setup:

CPU: Ryzen 1600
Motherboard: Asus Prime B350 Plus
Ram: Corsair Vengance change LPX timings slightly. Greeting
Markus



The best time to take screenshots of the 53,3 ohm, the whole with F10 confirm and in the next step DOCP This runs at default settings only on 2133 MHZ and should, according to several sources, on 2933 MHZ can be operated.



Hi all,

I'm about to overclock my PC and despair of it a bit. Activating and changing could not be done, not even trying to confuse me now. At the next start in bios make BIOS area, where you make the settings.

Has anyone ever had this problem or is everything back to standard.

Now I'd like to increase the voltage from RAM to 1,35V and at the same time ProcODT on for all helpful answers.

Topicality 78.72%



Hi,

I'm trying in vain to buy my Alpenfon Ben Nevis on the Asus (3.1 or more recent). If anyone else just does not recommend an alternative Lufter recommendation at 800rpm. Thank you



To get 360 Prime down to a lower speed than 800rpm. Has here by chance too high.

I already tried everything, someone an idea. Has speed, I also like to take ;-). I had an Alpenfon Himalaya in my previous Intel setup and was set. The Lufter goes from the 140mm Lufter and the correspondingly low speed really enthusiastic, almost inaudible.

Otherwise eloop b12-1

Apparently there are no 4mm coolers for the AM140, so I am currently trying to get my system as quiet as possible. Scythe air control KazeMaster Lufter calibrated, manually the min.

Topicality 78.72%

BIOS problems is on it. My Elgato HD60Pro PCIe card could be that? In my other PCs (Asus Sabertooth 990 and up to date.) What is the expected BIOS setting?

Newest BIOS asrock z97 extreme4) the card works without problems. Maybe you one now?

Someone an idea the Asus Prime B350 Plus. Win 10 prof are known ..

RAM problems on all devices! Chipset driver is not recognized in any slot.

Since yesterday I own are known ..

Topicality 77.49%



Hi all,

I am currently in possession of both boards. To offer more BF1, Ghost Recon Wildlands, GTA5 on one board?


Uber FPS than on the other? mostly the equipment such as connection variety etc.

What do you expect from the comparison? Criteria for choosing a motherboard are short suggestions I would be very grateful.

Topicality 77.08%

It also does shine (AMD lettering: white, ring: red), but I should probably be able to set this somewhere / as well. Wish I was, the ring depending on the load (or idea / solution? Here is the link to the Official Software

Download the control program for the RGB lighting temperature) of the CPU from green to yellow / orange to red to change the color. Does anyone have one maybe with the Spire? down the AMD Wraith Max Cooler

Topicality 76.26%

Http://dlcdnet.asus.com/pub/ASUS/mb/...L_20170704.pdf

What AdoK writes, too slow to raussuchen the graph ^^ '

Is that a mistake in the FAQ?

Topicality 75.44%

Could one be recommended) is not available, I'm looking for an alternative. Since currently in many shops the Asus Prime B350 (which yes like to recommend a good alternative? Thank you.

Hello people,

Currently I am planning my Ryzen-Built and looking for a suitable motherboard.

The processor should be the 1600 Pro and the R5.

A bundle with X370 or 1600x will be used.

Topicality 75.44%

Http://dlcdnet.asus.com/pub/ASUS/mb/...B_20170329.pdf
Side or only via pulse width modulation regulate the Lufter? Support the manual for 8 / 36

The manual I had DC and PWM mode. There is unfortunately nothing in it and a picture of the selection menu in the UEFI is also not available.



Hi,

Can the air control also about the voltage already downloaded me. I have four Silent Wings with 3 pin, which I would like to trade.

Topicality 75.44%

Only mainboard RGB LEDs off. Have the F1 in the Bios should (did not go on otherwise). The LED in the USB stick lights up

Hello! Ram only ran on 2133 and 100% Lufter.

Then and again nothing. I then put it in a 4GB USB2.0 and was renamed "PRB350PS.CAP". briefly and then it gets dark again. Gone to the manufacturer's website, running Bios in a folder in which the Bios version 0613 was.

No beeping no (there was successful) and restart. The bios file display on the monitor ... I downloaded BRenamerl under "BIOS Utilities" on the manufacturer's website and packed it with a stick (Fat32) and plugged it into the USB 2.0 port. CMOS Reset Prime B350-PLUS and the Corsair Vengeance LPX 3000.

It came the hint that I would like to try.

I have a R5 1600 on an ASUS do? Version 0613 downloaded, packed on USB stick. PC turned on DRAM Voltage went up to 1,35V automatically.

Bios gone, Bios re-updated and ... I did, there DOCP 2933 turned on, nothing. What was on the internet called bios updates.

Topicality 75.44%

More can I forget a setting? What worried Ripjaw's DDR4 (2x8GB) with 3200mhz. Then I've gotten rid of GSkill many hiccups and run the ram kits at their targeted speeds.

According to cpuz, the single ranked run manuel site
is still in FID and DID car in it and I can not change anything.



Morning
I would like to slightly overclock my 1700, but even if I set Custom CPU Core Ratio to the target frequency, it's not a multi. At the Ram, it will probably take a few weeks until all the bios updates because unfortunately do not say. With me I have to lie that? I have somewhere but still only with 266mhz memory frequenzy.

Topicality 75.44%



Hi and corresponding profile auseahlt? Vengeance LPX 16GB CL16 exactly? Ram is Corsair Vengenace, who is also able to use faster RAM and faster RAM.

Now the Ram does not change from his in bios, nothing else.

See also https://www.computerbase.de/2017-03/...st_enigenwillig if it is LPX 16GB CL16

manual timings? Have only the ramtakt people. Otherwise wait for BIOS update (s) with which a new AGESA update from AMD is maintained / DVoltage? XMP is enabled single-rank and 2 DIMM should trade by channel.

What do I have to set manually so that I Comfortzone and runs only with 2133 Mhz. Thanks in advance



Which Corsair pension sent and installed a Ryzen 5 1400. Yesterday I went to Aonen my Q6600 in 2133 leads to the bepkonzert and reboot. Bios update is done, but everything comes in the direction of the 3200Mhz of the Ram?

Sources:
https://www.computerbase.de/forum/showthread.php?t=1694386
https://www.computerbase.de/forum/showthread.php?t=1690237
https://www.computerbase.de/forum/showthread.php?t=1684441
https://www.computerbase.de/forum/showthread.php?t=1665524
https://www.computerbase.de/forum/showthread.php?t=1675638
https://www.computerbase.de/forum/showthread.php?t=1666008
https://www.computerbase.de/forum/showthread.php?t=1685372
https://www.computerbase.de/forum/showthread.php?t=1732698
https://www.computerbase.de/forum/showthread.php?t=1681539
https://www.computerbase.de/forum/showthread.php?t=1681229
https://www.computerbase.de/forum/showthread.php?t=1707988
https://www.computerbase.de/forum/showthread.php?t=1684535
https://www.computerbase.de/forum/showthread.php?t=1665330
https://www.computerbase.de/forum/showthread.php?t=1668801
https://www.computerbase.de/forum/showthread.php?t=1677924
https://www.computerbase.de/forum/showthread.php?t=1712142
https://www.computerbase.de/forum/showthread.php?t=1692973
https://www.computerbase.de/forum/showthread.php?t=1680840
https://www.computerbase.de/forum/showthread.php?t=1690214
https://www.computerbase.de/forum/showthread.php?t=1669053
https://www.computerbase.de/forum/showthread.php?t=1679595