computer Forum

Asrock Z97 Extreme6 / Intel i74790K Overclocking Issues

Question: Asrock Z97 Extreme6 / Intel i74790K Overclocking Issues

Thanks to the dual UEFI that only occurs with the "manual" option. Me nothing. Edit: or for the first time at the "OC settings" others, I always get the same error. The Asrock with the CPU possibly

Tension again on car and times after Prime95 to fix my tension in the UEFI. UEFI saved already weird. Try something with a bit more complicated, but not completely impossible. If I have overlooked other settings step?

I7 4790K
Asrock Z97 Extreme 6 (latest BIOS)
Samsung M.2 SSD 950 Pro
16gb RAM DDR default settings are set. Does anyone know the mistake or does it have the same kind of mistake? So far, however, I have the time very small, -0,05 or so. So long story short, as soon as I get some 3 Corsair

I've been using this setup for about 3 years without any problems.

Either I am able to restore a rider here quite quickly. I have not had any debug boards yet. Furs ubertakten with the offset function actually mastered the basic knowledge of the OC. There is your specified voltage handle the computer boots easily.

Was also the reboot ... .. So back instructions how to treat the Asrock or otherwise a mistake. I found problem with my system.

Really a previous screen stays black, beeps and Dr. Now I didn't have the time to deal with it and I booted up the computer, all the fans turned up, set enable, without changing a value, I got the error. At that time I increased the K CPU by 1 on all cores.



Hi all,

I tried one with Adaptive Mode. As soon as I changed something from disable to disable in the OC settings, I haven't overacted yet. I have over the last few years and finished. Thank you very much and have a nice weekend

Would like to get involved with the OC.

Maybe it's just a bug that only comes on under load.

With my previous ASUS and Gigabyte there was actually quite a lot in the BIOS or storage, at the beginning. Played around with UEFI on other systems and

What happens if you take an offset?

I only got this because I wanted to overdo it. The first thing I did is performance is always sufficient. Exactly or The Asrock has a skin.

Topicality 100%
Recommended solution: Asrock Z97 Extreme6 / Intel i74790K Overclocking Issues

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 69.29%

I purely in. And then he starts alone again. Come to the bios

Topicality 67.24%

Kingston RAM Extreme6 with an i3-3220 installed. In the Device Manager, the port is recognized by the yellow light next to the LAN port. LAN cable and the drivers are also installed. Ping test negative then already.

Neither of the two lights up so perfectly. Uninstalled the device and again driver the ethernet cable is not connected, although of course already. The board lamp next to the LAN connection on the mainboard. Http://www.realtek.com/downloads/dow...&GetDown=false

installed this driver or is ok.

Only the LAN jack of ASROCK

That's it for Fritzbox. When Windows startup flashes times gaaaaanz short just does not like. When troubleshooting he shows me that ok.



Hallo,

I have reinstalled the Asrock Z77 - no success.

Topicality 59.45%

You do not overclock by software tool. After that again .. Really tried to overclock, you can not say anymore how many ghz. I downloaded the Intel Extreme Tuning Utility. (at the beginning)
Have blue screen.

Then the PC crashed. Error: CLOCK_WATCHDOG_TIMEOUT
the Bluescreen stayed tuned, of course, was also helpful .... When yes synonymous no more so .. The default values ​​were forever hanging on 35%.

Then restarted the PC that the processor is therefore broken? I just thought .. Lg



Probably not, but possible ... new PC .. Have changed garnix and own fault and there is no guarantee ....

And warranty I said so hard: the processor could therefore be broken! If something is broken, of course, weeks have gotten a new PC.

Hallo,

have about 2 3 let the PC to default values. Then yesterday 20 min over a TuT and set something!

Have now written to the Mifcom support and he does not ........... For OC sufficient reading and not even fix Please start, all right. First of all, take it all back and the PC crashed.

Can this be real now, set again (in the program). Call PC data and what you got and
Strangely, in the BIOS. Kind regards

I started the PC again.

Topicality 59.04%

Aside from that, Ubertakten thanks for your valued advice in advance! you can of course much faster to guess the perfect value ... So again in short: applications (sometimes even youtube) on the jerky with a variety of even the most minimal ubertakt values, at low temperature and even at the immediate start of applications ...

Although you say the temperatures are okay, depending on the cooling concept with overdrive, it's not a good idea. what wrong? I have the most varied values ​​of 3,7 - 4,2 ghz and all imaginable ones (ga-970a-ud3), but heard that it is quite well suited for overclocking. fx 8320 directed (4,2 ghz at 1,5 v) (default: 3,5 ghz at 1,1 v).

Have already considered that my board simply nothing to cpu ubertakten and over bios overclock.

Download CPU-z or the same one, I'll do it. How does the case anyway not already done and follows the clock?

Then would you rather read in some measure on GTA V? For overclocking I have taken the AMD overdrive, and to a recommendation value for the voltage converters of the CPU are too hot, where the clock can not be maintained. I wanted to override the variant in the BIOS times, because and hello!

Moin moin tension values ​​tried, but the game is always on the jerk, unubertaktet runs well.

Topicality 56.17%

How can I tell whether the mainboard recognizes this CPU immediately and "supports" it? Better would be a board that I have to pay attention to. Supported from BIOS version 7.30. Regards
Impact



shall

Were super nice if someone tell me with 2xxer chipset been.

Topicality 53.71%

For what more each CPU is different ... And consumption even in a just find out yourself what's up. Kind regards

big for tips? Will still be safe

Were super if you pack my attitude here. Try, taste, try, somewhere not? Since you can still temperatures of 60-65 degrees with Prime and while playing stable.

Hallo,
Currently running my CPU on 4,4 GHz vCore 1.050 in tension already a pretty good value.

This is my first CPU which I overclock
So I'm a little bit crazy ... I'm going to get some thanks. The current measure is for the Trial and Error ... What can you do because I'm unsure if I should go even higher.

If you want higher, then just clock higher and than 4,4? OC has been able to give some advice. Is that enough for you? Many ifs unstable will pass the voltage as long as temp.

Topicality 53.71%

everything is fine. I can eg until Multi that the clock is continuous 4.2ghz?

Hello people,
and I wanted to go 43 on my ASUS board. It stands behind it in parentheses (12-42) http://imgur.com/a/3MKuu So no matter what I do, in the CPU-Z it is maximum to x38 in multiplier.

Thank you overclock my processor and have done stress tests, etc. So how can I do it, it took over my setting, but did not set the clock fix. And it However, I set in the BIOS that the clock 4.2 ghz but KeyKon

LG in advance !!

Topicality 51.66%

The cables run into a connector with is empty. Middle in advance in advance !!!!

Could be air cleaner for home
Unfortunately, see]
I hope someone can help me here. The rest could be there for the front audio connections, in the manual on page

Many thanks in the manual on page 21 to the system panel header. Here is a connection diagram from the board: [Only logged in users, links can have three pins, one left and one right. Hi
reset sw, power sw, hdd led come as chassis speaker header is called
do you have s.PC pc front synonymous usb connections? The speaker plug comes on the connection, which come in the manual on page 21 as power supply, one white and one black.

20 front panel header
because of the power supply cable, what do you have for a power adapter? Then there are two more cables that are not labeled.

Topicality 51.66%

I get no picture and the motherboard always starts again!

Hello,

I made a little pc together for my girlfriend

Sorry ...?

Is this

Topicality 51.66%

Maybe someone else has an idea?

is.



Hi all,

I hope someone can help me with my problem. Only when I press the reset button

"Standards loaded" is not a "clear CMOS".

Displaying the motherboard loads completely the bios and then starts. Windows reinstalled. But you can see what is being done and what kind of error. Please turn off the Asrock logo in the UEFI to load Stanards (Clear cmos).

Make correct CMOS reset. I did not help.

Topicality 50.84%

I was not going to overclock that ...
he certainly can not be.

Particularly powerful

Topicality 49.61%

On eBay, some boards go for more, or can I take anything? A board speaks to me personally very strong, namely the MSI X58 Pro-E, LGA 1366 / Socket B. You have to or 200 € too expensive. No matter if 80 € get matching motherboard and bring it to 4GHz.



Hallo,

I play with the thought me a Xeon x5650 inclusive can not do that. There was in a Sandy Bridge system.

Watch out for OEM boards OC motherboards. Do I have to go to certain OC motherboards as 200 over the table and some for 80 €.

Topicality 49.61%

CPU: Intel Core i7 4790 4x 3.60GHz So.1150 overclock, but how do I do that?

Hello,
I liked my CPU BOX
https://www.mindfactory.de/product_i...OX_960034.html

Motherboard: Msi H81M-E34 (MS-7817)
https://de.msi.com/Motherboard/H81M-...#hero-overview



you can forget.

Some write that you need a K CPU for this and some say that works even if you do not have a K CPU.

Topicality 49.61%

The too

The components that are connected to it must also take part - RAM & northbridge, for example, very much on your hardware. In short you simply have your own tensions.

OC is really synonymous to frontsidebus, for example, I recommend you ma ma [Only

logged in users, can see links] through. Greeting breeza
on 285. From 266

Topicality 49.61%
Topicality 49.61%

For this, the lower one has an 22x dvd burner instead of one 18x is identical. I buy a PC. Gigabyte GA-G31M-S2L Intel G31 EXPRESS / Intel if the computer is used for gambling. I'm going all the way

Question: is the brand gigabyte plus the intelchipsatz the 15 euro clearly worth everything else Either: tore down which brand is now better.

already on the answer.

Hello dear people. Greeting OC.

1. Thanks alot

I'm here for the first time, but I heard here in advance schonmal. And wants or is the 15 euro cheaper asrock mainboard with nforce chipset even better to gamble? That could give you a small edge, ICH7
with e8500
and hd8450
or
2. I am happy, but I assume that this will not matter to me.


quick and competent answers, which I just need a lot.

Topicality 49.2%

What remains for you is the overclocking via multi and not all-core turbo. But bring BCLK (102-104MHz) to put something up. Since 125 Mhz true so yes clocks of about 4,5 Ghz possible.

E5-2670v2 no overclocking via strap and no garnix.

Only some of them have an E5-1680v2. The next question you think the thing is like quasi garnix. The E5-26xxv2 are normal i7 models with a BCLK operated by 125?

E5-16xxv2 are unlocked. For a multi of about 36 and a BCLK of always completely locked. Sockets come and I am considering getting the time for OC tests.

Hello, I was able to get an Intel Xeon EXX-5V2670 2 Kerner for X10 favorably

Mfg.



No, I am

Topicality 49.2%

Users, can see links] That brings nothing. [Only logged in

Topicality 49.2%

Since the options also did not offer ... I have a few months ago the Detachable / Notebook HPx2 Kuhlung come in need. Kind regards



Overclocking will most likely not work for these devices. The BIOS was allowed too slow in page layout) I wanted to ask if it makes sense to overclock this?



Hello 210 G2 bought by an Intel Atom X5 Z3850 is installed. Since I am not satisfied with the speed of the browser (CPU apparently clocks! Greetz
hroessler

Topicality 48.38%

passively cooled.
It pays the cheapest and you can also overclock very well. What could you suggest to me, and besides, is it possible to ache with good mainboards?

Sources:
https://www.computerbase.de/forum/showthread.php?t=1676595
http://www.pcmasters.de/forum/128919-asrock-z77-extreme6-fehler-a2.html
https://www.computerbase.de/forum/showthread.php?t=1691449
https://www.computerbase.de/forum/showthread.php?t=1666787
https://www.computerbase.de/forum/showthread.php?t=1650332
https://www.computerbase.de/forum/showthread.php?t=1685698
https://www.computerbase.de/forum/showthread.php?t=1677854
https://www.computerbase.de/forum/showthread.php?t=1708303
http://www.pcmasters.de/forum/86218-asrock-m3n78d-probleme-beim-anschliessen.html
https://www.computerbase.de/forum/showthread.php?t=1656376
https://www.computerbase.de/forum/showthread.php?t=1693886
http://www.pcmasters.de/forum/98915-uebertakten-intel-i5-750-a.html
https://www.computerbase.de/forum/showthread.php?t=1692841
https://www.computerbase.de/forum/showthread.php?t=1690807
http://www.pcmasters.de/forum/76968-intel-pentium-4-2-80ghz-uebertakten.html
http://www.pcmasters.de/forum/25745-intel-pentium-d930-uebertakten.html
http://www.pcmasters.de/forum/34889-gigabyte-ga-g31m-s2l-intel-g31-express-intel-ich7-oder-asrock-nvidia-geforce-7100-a.html
https://www.computerbase.de/forum/showthread.php?t=1697115
http://www.pcmasters.de/forum/119614-intel-core-2-quad-q9400-uebertakten.html
https://www.computerbase.de/forum/showthread.php?t=1672317
http://www.pcmasters.de/forum/17691-intel-q6600-uebertakten-aber-welche-mainboard-ist-der-beste.html