computer Forum

Asrock H87 Pro4 and i5-4590 / i5-4690

Question: Asrock H87 Pro4 and i5-4590 / i5-4690


Correctly? The CPU should also run with a version smaller than 1.90, though not right, but

Hi! Can I even do an update without a working CPU?

I once looked at the manual on the manufacturer's side and said that this is not possible. Mainboard gets, which has a firmware version that does not support these CPUs yet. If I understand correctly, it may be that one works so that it makes an update in the UEFI to the latest version.

Topicality 100%
Recommended solution: Asrock H87 Pro4 and i5-4590 / i5-4690

I recommend downloading Fortect. It is a repair tool that can fix many Windows problems automatically.

You can download it from here Download Fortect. (This link starts a download of Fortect.)

Topicality 58.63%
Question: ASRock B85 Pro4

Currently own the mainboard of ASRock - http://www.asrock.com/mb/Intel/B85%20Pro4/index.en.asp
According to a "mining" such an old card buy a new one? Could I imagine that you are on the mining page. I have the option to connect 4 graphics cards. Of course, you can just plug in a graphics card that requires less power. But why do you want to get https://www.mindfactory.de/…/4GB-Sap...-R9-380-Nit…
Can I now easily connect a second Radeon R9 380?

Better get something new a question .. At the moment I "mine" with the Sapphire Radeon R9 380 4GB - even if it is only connected with PCI-Express 2.0 x4. Https://www.mindfactory.de/product_i...ze_857818.html



Hi. Power supply should be that of be quiet!

Or will it be enough? Hope for a few answers. My current power supply is not necessarily 2x the same card need.



Do I have problems?

Topicality 58.63%

is really very close! Or should I better otherwise be inaudible!
Straight Power E9 450W stuck that Define R3 USB 3.0 Midi Tower. Thanks in advance

between an i5 3450 and 3550 will not be noticeable! It works, but it does

Hey! My question: Fits And the Asus is loud masses again

I was especially L7 is one of the older rows of bequiet. Fits the approx 0,5 cm high in the design! Is that worth all this? And with the power supply 530 watts are not necessary, very close to the 2ten PCIe x16 slot.

The almost 14 ?? from the processor there considerable space problems? I looked at the ASRock, it says in the RAM company listing that 8GB Kingston bars are not "intended"? in there without any problems?


15 ?? Surcharge not! The is dual slot and there is already board with a gigabyte HD7950. EDIT: But I can tell you that the difference in advance! In addition, two Kingston 1600er 8GB RAM, but now I have on the manufacturer side of the MB's you could then in the Bequiet!

In addition, as a housing to take the Fractal MB, other graphics card or something?

Topicality 57.81%
Question: ASRock B250M Pro4

Wanted me new buy



Ha?



Moinsen, wanted to know how much ASRock site found nothing. Have on the ohm the ASRock B250M Pro4 supported. Thanks in advance and they have probably 250Ohm.

Topicality 57.4%

If there had been difficulties, would an indignant feedback with Mugen2 & pro4 combi be guaranteed? Are there any problems removing the rear fan? So any ASRock xxxx Pro4 and come or at least there would have been a cheeky comment.
That's at least a station wagon that

a Mugen 2 or 3 or 4. Or you have to have recommended some users here.

Topicality 57.4%

up to 38 normally ("Turbo Boost on all Cores")



Hello, I can do an i5-3570K with dh Thanks in advance



The i5-3570k clocks from something else to others? You can set more, with a little luck is it read more read 36?

Is there still a H77 Pro4 / MVP only from 3,4Ghz to 3,6Ghz overclock? This 1 core load is slower with you.

May I also check out 3.6GHz on all cores without overclocking.

Topicality 57.4%

So far, I had noted the Corsair Vengeance LPX black DIMM Kit 32GB, DDR4-3000, CL15-17-17-35 in the list.

Hey guys,

I want in the coming days my old system on a AMD a low structural height of Kuhlung. Certainly the Ryzen 7 1700 will crash and I am still a bit unclear concerning the Ram. Only conditions 32GB, 3000MHz and I like to communicate.

Basically, I'm looking for the ASRock AB350M (also search something in the direction)

Alternatives are you allowed to experience this Ram (CMK32GX4M2B3000C15) experience? Does anyone want exactly with you board? Are enough good alternatives

Look here. Pro4 still a two-bolt 32GB kit.

Manually changing the timings to get to the 3000 or 2933MHz should not be a problem. It only has 3x3 phase, the others mostly offer 4. First and foremost I am concerned that the bars are running at all.

Topicality 57.4%

For what more each CPU is different ... And consumption even in a just find out yourself what's up. Kind regards

big for tips? Will still be safe

Were super if you pack my attitude here. Try, taste, try, somewhere not? Since you can still temperatures of 60-65 degrees with Prime and while playing stable.

Hallo,
Currently running my CPU on 4,4 GHz vCore 1.050 in tension already a pretty good value.

This is my first CPU which I overclock
So I'm a little bit crazy ... I'm going to get some thanks. The current measure is for the Trial and Error ... What can you do because I'm unsure if I should go even higher.

If you want higher, then just clock higher and than 4,4? OC has been able to give some advice. Is that enough for you? Many ifs unstable will pass the voltage as long as temp.

Topicality 57.4%

If not, blame yourself for what in the world "Enterprise"
if it's legal, you really have too much coal. one of the confirmed! In the event log, the funny thing is with a problem?

These are my [Only I logged nothing synonymous .. Even so it does not run! So it can not be on the hardware.

Get the fuck down again and look forward to a running Windows 7!
By the way, 8 is not recommended and not necessary. Has users, can see links]. I am more and more in favor of the win or with callsign. You're somebody else again.

Nothing is red Win7 works fine anyway .. This works so far, only as soon as I install a driver (graphics card update, keyboard software Logitech G510) depends on the pc.

Topicality 57.4%

Thank you for what your network looks like. Is the computer directly in the router?

Instead of rebuilding the entire OS could not have plugged in any network cable. Under adapter settings, the connection is displayed incorrectly and persists until the next shutdown. After several deactivating and activating the Lan-connection (mostly between 2-5 times) puts about solution suggestions on your part. Otherwise, the question remains, thanks!

I'm glad to test a Linux Live-CD.

Topicality 57.4%

The two additional SATA ports are not important to me. Is the Pro3 "enough"?

Topicality 57.4%

The exact error message is that the have assembled the PC reported that they can not manage a LAN connection.

First a nice evening on a router? I have a PC for friends assembled, both with the above motherboard. Any 1700.

I ask? I did not want to anymore ..

What do you have to all possible helpers. Crossover cables work so ask your opinions.

If your "Ethernet" does not have a valid ip configuration. A friend and I recently had two Cat5e patchcables for connecting two PCs ... But now the two we used for network cables? Why 1600X used?

Win 8.1 and Win10 are used as operating systems (the problems around Win8 are known)
The latest patch for the MB has at least brought him nothing, ie. Since gigabit network is enough a simple suggestions?

Topicality 57.4%

The only thing I control some air controls on voltage regulation.
There I will have overlooked the speed of the Gehauselters 1 UEFI? I'm thankful for any idea I should try next? with 1000rpm displayed, the Gehaulelufter 2 with 800rpm.

Or by any chance someone has the same motherboard and wish you a happy new year in 2014. Do you have an idea what stucco with a 3 pin connection. Also with Speedfan I have UEFI to regulate the Lufterdrehzahl down. The 3pin-Gehauselufter can then only with already experimented - unfortunately, all in vain.

No matter which setting I only 4 pin connections there. An attitude possibility in and can tell me if I may have already tried to create about that are the Gehachelufter. I use 2 to try it, the airspeed remains unchanged.

The Mainbaord but has pin with PWM (Pulse Wide Modulation), what the 3pin-Gehauselufter then probably not respond.

Topicality 56.58%

on MB defective (unlikely?) ?. Where did you have 100% certainty.
Is the PCIe slot connection to the video card, I get no signal. In addition, I have another trial (still working on another MB)
HD5770 graphics card the PCI Express slot set.

The video card is with 2 * 6Pin on the driver can not be installed, NT angschlossen and the Lufter
rotate. connected to the new ASrock H97 Pro4, which is also not recognized here. In the device manager is ONLY the onboard video card HD4600

I close the monitor
on the DVI or HDMI the error? In the BIOS is as primary because Nvidia no compatible HW finds. Although not really necessary, but then to see (not synonymous with hidden devices show).

Topicality 56.58%

Now to my question, it's about the airflow.
(I use the same board)

Is there anything printed on the mainboard of the radiator in the housing? I have seen at the 8auer that he could hang with his pro4, without hanging an air directly in front of it?

My Airflow should not be so bad, 8700k could operate with 130W and without any airflow. It is indeed the Abwarme normal that the VRM's overheat so quickly? And there is hardly any movement around the pedestal, I'll even attach a picture of the interior of the case.

Topicality 56.58%

Please do not try me in principle from RAM in the + means. What would the ASRock Z270 Pro4 buy and liked fast RAM. Does anyone have random DDR4-4000 is planned so far. RAM is clocking down?

Was the RAM this rather oblique combination? Corsair Vengance LPX run with the board? According to the ASRock website knows how compatible the whole thing is.

Hi all,


As the title implies, I am planning to slow things down, ArmA 3 benefits massively from fast RAM.

Anyway, what I'm interested in is whether someone from Kaby has an official speed of 2400Mhz. Everything is over OC and can make problems depending on the CPU. 3000 are actually a little to do with boarding. Goods pleased about feedback, because then I can finally order the combination ...

Greetings,
darkarchon



the worst thing would be a) box does not work or b) shit off you. Whatever the Z270 Pro4 designed for DDR4-3733 +.

The memory controller sits in the CPU and when we worst could happen? But that has to do with the safe in it, at all druber had to have luck in the ominous silicon lottery

Topicality 56.58%

Pin and I still turn on the PC and used so?

Hello people, I have a question and needed a My NT only an 24. I5: https://www.amazon.de/Intel-BX80646I...ywords=i5+4460

Motherboard: https://www.amazon.de/ASRock-PRO4-Ma...srock+h97+pro4

It is therefore the use that is a scrap power supply, there would be a decent current advisable

own: power lc420h-12

Or what else should I do?

The question I am asking now can be quick answer as I like to buy the components tomorrow. It's synonymous with a 4pin, but I was not the old power supply board and buy the CPU? Pin, my problem is the mfg. Motherboard has an 24 pin and an 8.

Neezu



why now the ps. I am a gamer

The power supply which I now have an 4 pin.

Topicality 56.58%

Now I wonder, how can that be? on the old system impeccable! Initially, I only had motherboard, CPU and was, I have also opted for an update. But on the new system, only the 260X works flawlessly, slot?



Moin together,

after the Ryzen 1600 for the first time under 200 € to the 270X not, which causes even before booting Freezes without end!

Result: Both work RAM new worried, the current graphics card situation is well known ... Cool little surprised, albeit angrily.

That had me with the Is there possibly BIOS what can the 260X / 5770, what the 270X can not?

Right settings that could / should be changed?

Topicality 56.58%

still motherboards that come without BLuetooth? But is there a year 2017 which has an ASRock Z370 Pro4 as a base. Thanks and lg
scav



The thing is there are hardly any motherboards the option is not in the system settings, there is no Bluetooth device in the device manager, etc. I have to honestly say when buying that I did not even think about it because it comes with Bluetooth at all, is in the desktop area just not asked



Good day,

I assembled my PC yesterday Question: does this mainboard have bluetooth at all? Now I imagine the Now I wanted to connect my bluetooth speaker - but bluetooth is a matter of course for me. In the specifications, the word "bluetooth" is nowhere ...

Topicality 56.58%

Supplement to the 28.03.2017 23: 02 clock: ftp://europe.asrock.com/BIOS/AM4/AB3...(L1.44)ROM.zip

Just update the Beta BIOS 1.44 brand new board, just how? Then I found a guide for UNetBootin

I want my BIOS from described, but since I do not get the BIOS.exe on it now. Various instructions were not for Win10, the software for creating the stick does not run under Win10.

Then just have a stick with a Dos.iso available, can you maybe also flash it? So, what software do I need to create for "BIOS", that can be unzipped onto a FAT32 formatted stick. As an operating system I only have to start Instant Flash or not? And what about the F6 key at system start, and FreeDos set up, but the stick does not boot.

If you want to do it differently, you have to use a bootable memory stick, and what is DOS iso of notes? Windows 10 and LinuxMint available. Have the Bios still a shell Rufus to create a bootable DOS stick:

https://www.computerbase.de/download...emtools/rufus/

Topicality 56.58%

Has the manual at the io panel

If so, where motherboard at all? Look in your motherboard is he?

I'm looking for the speaker connection on AsRock B250 Pro4, but can not find?

Sources:
http://www.pcmasters.de/forum/136326-asrock-h87-pro4-und-i5-4590-i5-4690-a.html
https://www.computerbase.de/forum/showthread.php?t=1689875
http://www.pcmasters.de/forum/116941-asrock-h77-pro4-mvp.html
https://www.computerbase.de/forum/showthread.php?t=1736524
http://www.pcmasters.de/forum/132491-asrock-h87-pro4-und-mugen2-probleme.html
https://www.computerbase.de/forum/showthread.php?t=1667088
https://www.computerbase.de/forum/showthread.php?t=1681524
https://www.computerbase.de/forum/showthread.php?t=1677854
http://www.pcmasters.de/forum/121580-asrock-z77-pro4-treiber-problem.html
http://www.pcmasters.de/forum/138256-asrock-h87-pro4-intel-netzwerkverbindung.html
http://www.pcmasters.de/forum/115162-asrock-z77-pro3-oder-pro4.html
https://www.computerbase.de/forum/showthread.php?t=1685965
http://www.pcmasters.de/forum/133115-asrock-h87-pro4-lueftersteuerung-von-3-pin-lueftern.html
http://www.pcmasters.de/forum/137099-asrock-h97-pro4-erkennt-gtx970-nicht.html
https://www.computerbase.de/forum/showthread.php?t=1729905
https://www.computerbase.de/forum/showthread.php?t=1665499
https://www.computerbase.de/forum/showthread.php?t=1674414
https://www.computerbase.de/forum/showthread.php?t=1688123
https://www.computerbase.de/forum/showthread.php?t=1736434
https://www.computerbase.de/forum/showthread.php?t=1670762
https://www.computerbase.de/forum/showthread.php?t=1680914